[PATCH 7/8] drm/sun4i: Add various bits and pieces to enable LVDS support on sun4i
From: Priit Laes
Date: Sat Feb 11 2017 - 12:44:32 EST
TODO: We still rely on u-boot for lvds reset bit setup :(
Signed-off-by: Priit Laes <plaes@xxxxxxxxx>
---
drivers/gpu/drm/sun4i/sun4i_lvds.c | 29 ++++++++++++++++++++
drivers/gpu/drm/sun4i/sun4i_tcon.c | 54 ++++++++++++++++++++++++++++++++------
drivers/gpu/drm/sun4i/sun4i_tcon.h | 15 +++++++++++
3 files changed, 90 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun4i_lvds.c b/drivers/gpu/drm/sun4i/sun4i_lvds.c
index 2ba4705..de738e5 100644
--- a/drivers/gpu/drm/sun4i/sun4i_lvds.c
+++ b/drivers/gpu/drm/sun4i/sun4i_lvds.c
@@ -114,6 +114,35 @@ static void sun4i_lvds_encoder_enable(struct drm_encoder *encoder)
/* encoder->bridge can be NULL; drm_bridge_enable checks for it */
drm_bridge_enable(encoder->bridge);
+ /* Enable the LVDS */
+ regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_IF_REG,
+ SUN4I_TCON0_LVDS_IF_ENABLE,
+ SUN4I_TCON0_LVDS_IF_ENABLE);
+
+ /*
+ * TODO: SUN4I_TCON0_LVDS_ANA0_REG_C and SUN4I_TCON0_LVDS_ANA0_PD
+ * registers span 3 bits, but we only set upper 2 for both
+ * of them based on values taken from Allwinner driver.
+ */
+ regmap_write(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
+ SUN4I_TCON0_LVDS_ANA0_CK_EN |
+ SUN4I_TCON0_LVDS_ANA0_REG_V |
+ SUN4I_TCON0_LVDS_ANA0_REG_C |
+ SUN4I_TCON0_LVDS_ANA0_EN_MB |
+ SUN4I_TCON0_LVDS_ANA0_PD |
+ SUN4I_TCON0_LVDS_ANA0_DCHS);
+
+ udelay(2000);
+
+ regmap_write(tcon->regs, SUN4I_TCON0_LVDS_ANA1_REG,
+ SUN4I_TCON0_LVDS_ANA1_INIT);
+
+ udelay(1000);
+
+ regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA1_REG,
+ SUN4I_TCON0_LVDS_ANA1_UPDATE,
+ SUN4I_TCON0_LVDS_ANA1_UPDATE);
+
sun4i_tcon_channel_enable(tcon, 0);
}
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index 71d0087..468a3ce 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -18,6 +18,7 @@
#include <drm/drm_panel.h>
#include <linux/component.h>
+#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
@@ -29,6 +30,7 @@
#include "sun4i_crtc.h"
#include "sun4i_dotclock.h"
#include "sun4i_drv.h"
+#include "sun4i_lvds.h"
#include "sun4i_rgb.h"
#include "sun4i_tcon.h"
@@ -169,12 +171,29 @@ void sun4i_tcon0_mode_set(struct sun4i_tcon *tcon,
SUN4I_TCON0_BASIC2_V_BACKPORCH(bp));
/* Set Hsync and Vsync length */
- hsync = mode->crtc_hsync_end - mode->crtc_hsync_start;
- vsync = mode->crtc_vsync_end - mode->crtc_vsync_start;
- DRM_DEBUG_DRIVER("Setting HSYNC %d, VSYNC %d\n", hsync, vsync);
- regmap_write(tcon->regs, SUN4I_TCON0_BASIC3_REG,
- SUN4I_TCON0_BASIC3_V_SYNC(vsync) |
- SUN4I_TCON0_BASIC3_H_SYNC(hsync));
+ if (type != DRM_MODE_ENCODER_LVDS) {
+ // Not needed for LVDS?
+ hsync = mode->crtc_hsync_end - mode->crtc_hsync_start;
+ vsync = mode->crtc_vsync_end - mode->crtc_vsync_start;
+ DRM_DEBUG_DRIVER("Setting HSYNC %d, VSYNC %d\n", hsync, vsync);
+ regmap_write(tcon->regs, SUN4I_TCON0_BASIC3_REG,
+ SUN4I_TCON0_BASIC3_V_SYNC(vsync) |
+ SUN4I_TCON0_BASIC3_H_SYNC(hsync));
+ }
+
+ if (type == DRM_MODE_ENCODER_LVDS) {
+ /* Setup bit depth */
+ /* TODO: Figure out where to get display bit depth
+ * val = (1: 18-bit, 0: 24-bit)
+ * TODO: Should we set more registers:
+ * BIT(28) - LVDS_DIRECTION
+ * BIT(27) - LVDS_MODE
+ * BIT(23) - LVDS_CORRECT_MODE
+ */
+ regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_IF_REG,
+ SUN4I_TCON0_LVDS_IF_BITWIDTH,
+ SUN4I_TCON0_LVDS_IF_BITWIDTH);
+ }
/* Setup the polarity of the various signals */
if (!(mode->flags & DRM_MODE_FLAG_PHSYNC))
@@ -183,8 +202,15 @@ void sun4i_tcon0_mode_set(struct sun4i_tcon *tcon,
if (!(mode->flags & DRM_MODE_FLAG_PVSYNC))
val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE;
+
+ /* Set proper DCLK phase value */
+ if (type == DRM_MODE_ENCODER_LVDS)
+ val |= SUN4I_TCON0_IO_POL_DCLK_PHASE(1);
+
regmap_update_bits(tcon->regs, SUN4I_TCON0_IO_POL_REG,
- SUN4I_TCON0_IO_POL_HSYNC_POSITIVE | SUN4I_TCON0_IO_POL_VSYNC_POSITIVE,
+ SUN4I_TCON0_IO_POL_HSYNC_POSITIVE |
+ SUN4I_TCON0_IO_POL_VSYNC_POSITIVE |
+ SUN4I_TCON0_IO_POL_DCLK_PHASE_MASK,
val);
/* Map output pins to channel 0 */
@@ -480,6 +506,7 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master,
struct drm_device *drm = data;
struct sun4i_drv *drv = drm->dev_private;
struct sun4i_tcon *tcon;
+ const char *mode;
int ret;
tcon = devm_kzalloc(dev, sizeof(*tcon), GFP_KERNEL);
@@ -525,7 +552,18 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master,
goto err_free_clocks;
}
- ret = sun4i_rgb_init(drm);
+ /* Check which output mode is set, defaulting to RGB */
+ ret = of_property_read_string(dev->of_node, "mode", &mode);
+
+ if (ret || !strcmp(mode, "rgb"))
+ ret = sun4i_rgb_init(drm);
+ else if (!strcmp(mode, "lvds"))
+ ret = sun4i_lvds_init(drm);
+ else {
+ dev_err(dev, "Unknown TCON mode: %s\n", mode);
+ ret = -1;
+ }
+
if (ret < 0)
goto err_free_clocks;
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.h b/drivers/gpu/drm/sun4i/sun4i_tcon.h
index b040e10..dc4e350 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.h
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.h
@@ -69,8 +69,11 @@
#define SUN4I_TCON0_TTL3_REG 0x7c
#define SUN4I_TCON0_TTL4_REG 0x80
#define SUN4I_TCON0_LVDS_IF_REG 0x84
+#define SUN4I_TCON0_LVDS_IF_ENABLE BIT(31)
+#define SUN4I_TCON0_LVDS_IF_BITWIDTH BIT(26)
#define SUN4I_TCON0_IO_POL_REG 0x88
#define SUN4I_TCON0_IO_POL_DCLK_PHASE(phase) ((phase & 3) << 28)
+#define SUN4I_TCON0_IO_POL_DCLK_PHASE_MASK (3 << 28)
#define SUN4I_TCON0_IO_POL_HSYNC_POSITIVE BIT(25)
#define SUN4I_TCON0_IO_POL_VSYNC_POSITIVE BIT(24)
@@ -128,6 +131,18 @@
#define SUN4I_TCON_CEU_RANGE_G_REG 0x144
#define SUN4I_TCON_CEU_RANGE_B_REG 0x148
#define SUN4I_TCON_MUX_CTRL_REG 0x200
+#define SUN4I_TCON0_LVDS_ANA0_REG 0x220
+#define SUN4I_TCON0_LVDS_ANA0_CK_EN BIT(29) | BIT(28)
+#define SUN4I_TCON0_LVDS_ANA0_REG_V BIT(27) | BIT(26)
+/* TODO: BIT(23) also belongs to ANA0_REG_C register set */
+#define SUN4I_TCON0_LVDS_ANA0_REG_C BIT(25) | BIT(24)
+#define SUN4I_TCON0_LVDS_ANA0_EN_MB BIT(22)
+/* TODO: BIT(19) also belongs to ANA0_PD register set */
+#define SUN4I_TCON0_LVDS_ANA0_PD BIT(21) | BIT(20)
+#define SUN4I_TCON0_LVDS_ANA0_DCHS BIT(16)
+#define SUN4I_TCON0_LVDS_ANA1_REG 0x224
+#define SUN4I_TCON0_LVDS_ANA1_INIT (0x1f << 26 | 0x1f << 10)
+#define SUN4I_TCON0_LVDS_ANA1_UPDATE (0x1f << 16 | 0x1f << 00)
#define SUN4I_TCON1_FILL_CTL_REG 0x300
#define SUN4I_TCON1_FILL_BEG0_REG 0x304
#define SUN4I_TCON1_FILL_END0_REG 0x308
--
2.9.3