[PATCH v2 14/25] Staging: rtl8192u: ieee80211: ieee80211_softmac.c - style fix

[Derek Robson]

Fixed style of block comments
Found using checkpatch

Signed-off-by: Derek Robson <robsonde@xxxxxxxxx>
---
 .../staging/rtl8192u/ieee80211/ieee80211_softmac.c | 71 +++++++++++-----------
 1 file changed, 36 insertions(+), 35 deletions(-)

diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
index 844e257ece7a..ab1018c0bb0b 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
@@ -203,14 +203,14 @@ static u8 MgntQuery_MgntFrameTxRate(struct ieee80211_device *ieee)
 	}
 
 	/*
-	// Data rate of ProbeReq is already decided. Annie, 2005-03-31
-	if( pMgntInfo->bScanInProgress || (pMgntInfo->bDualModeScanStep!=0) )
-	{
-	if(pMgntInfo->dot11CurrentWirelessMode==WIRELESS_MODE_A)
-	rate = 0x0c;
-	else
-	rate = 0x02;
-	}
+	 *  //Data rate of ProbeReq is already decided. Annie, 2005-03-31
+	 * if( pMgntInfo->bScanInProgress || (pMgntInfo->bDualModeScanStep!=0) )
+	 * {
+	 * if(pMgntInfo->dot11CurrentWirelessMode==WIRELESS_MODE_A)
+	 * rate = 0x0c;
+	 * else
+	 * rate = 0x02;
+	 * }
 	 */
 	return rate;
 }
@@ -270,10 +270,10 @@ inline void softmac_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieee
 		if(!ieee->check_nic_enough_desc(ieee->dev,tcb_desc->queue_index)||\
 				(skb_queue_len(&ieee->skb_waitQ[tcb_desc->queue_index]) != 0)||\
 				(ieee->queue_stop) ) {
-			/* insert the skb packet to the management queue */
-			/* as for the completion function, it does not need
+			/* insert the skb packet to the management queue
+			 * as for the completion function, it does not need
 			 * to check it any more.
-			 * */
+			 */
 			printk("%s():insert to waitqueue!\n",__func__);
 			skb_queue_tail(&ieee->skb_waitQ[tcb_desc->queue_index], skb);
 		} else {
@@ -1455,8 +1455,8 @@ inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee
 			(!apset && ssidset && ssidbroad && ssidmatch)
 			){
 				/* if the essid is hidden replace it with the
-				* essid provided by the user.
-				*/
+				 * essid provided by the user.
+				 */
 				if (!ssidbroad) {
 					strncpy(tmp_ssid, ieee->current_network.ssid, IW_ESSID_MAX_SIZE);
 					tmp_ssid_len = ieee->current_network.ssid_len;
@@ -1726,11 +1726,10 @@ static short ieee80211_sta_ps_sleep(struct ieee80211_device *ieee, u32 *time_h,
 	int timeout = ieee->ps_timeout;
 	u8 dtim;
 	/*if(ieee->ps == IEEE80211_PS_DISABLED ||
-		ieee->iw_mode != IW_MODE_INFRA ||
-		ieee->state != IEEE80211_LINKED)
-
-		return 0;
-	*/
+	 *	ieee->iw_mode != IW_MODE_INFRA ||
+	 *	ieee->state != IEEE80211_LINKED)
+	 *	return 0;
+	 */
 	dtim = ieee->current_network.dtim_data;
 	if(!(dtim & IEEE80211_DTIM_VALID))
 		return 0;
@@ -2092,8 +2091,8 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
 	case IEEE80211_STYPE_DISASSOC:
 	case IEEE80211_STYPE_DEAUTH:
 		/* FIXME for now repeat all the association procedure
-		* both for disassociation and deauthentication
-		*/
+		 * both for disassociation and deauthentication
+		 */
 		if ((ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE) &&
 			ieee->state == IEEE80211_LINKED &&
 			ieee->iw_mode == IW_MODE_INFRA){
@@ -2168,7 +2167,7 @@ void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device *
 			/* insert the skb packet to the wait queue */
 			/* as for the completion function, it does not need
 			 * to check it any more.
-			 * */
+			 */
 			//printk("error:no descriptor left@queue_index %d\n", queue_index);
 			//ieee80211_stop_queue(ieee);
 #ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
@@ -2517,18 +2516,18 @@ static void ieee80211_associate_retry_wq(struct work_struct *work)
 		goto exit;
 
 	/* until we do not set the state to IEEE80211_NOLINK
-	* there are no possibility to have someone else trying
-	* to start an association procedure (we get here with
-	* ieee->state = IEEE80211_ASSOCIATING).
-	* When we set the state to IEEE80211_NOLINK it is possible
-	* that the RX path run an attempt to associate, but
-	* both ieee80211_softmac_check_all_nets and the
-	* RX path works with ieee->lock held so there are no
-	* problems. If we are still disassociated then start a scan.
-	* the lock here is necessary to ensure no one try to start
-	* an association procedure when we have just checked the
-	* state and we are going to start the scan.
-	*/
+	 * there are no possibility to have someone else trying
+	 * to start an association procedure (we get here with
+	 * ieee->state = IEEE80211_ASSOCIATING).
+	 * When we set the state to IEEE80211_NOLINK it is possible
+	 * that the RX path run an attempt to associate, but
+	 * both ieee80211_softmac_check_all_nets and the
+	 * RX path works with ieee->lock held so there are no
+	 * problems. If we are still disassociated then start a scan.
+	 * the lock here is necessary to ensure no one try to start
+	 * an association procedure when we have just checked the
+	 * state and we are going to start the scan.
+	 */
 	ieee->state = IEEE80211_NOLINK;
 
 	ieee80211_softmac_check_all_nets(ieee);
@@ -2765,7 +2764,8 @@ void ieee80211_softmac_free(struct ieee80211_device *ieee)
 static int ieee80211_wpa_enable(struct ieee80211_device *ieee, int value)
 {
 	/* This is called when wpa_supplicant loads and closes the driver
-	 * interface. */
+	 * interface.
+	 */
 	printk("%s WPA\n", value ? "enabling" : "disabling");
 	ieee->wpa_enabled = value;
 	return 0;
@@ -3082,7 +3082,8 @@ static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee,
 	 * generate new IEEE 802.11 authentication which may end up in looping
 	 * with IEEE 802.1X.  If your hardware requires a reset after WEP
 	 * configuration (for example... Prism2), implement the reset_port in
-	 * the callbacks structures used to initialize the 802.11 stack. */
+	 * the callbacks structures used to initialize the 802.11 stack.
+	 */
 	if (ieee->reset_on_keychange &&
 	    ieee->iw_mode != IW_MODE_INFRA &&
 	    ieee->reset_port &&
-- 
2.11.1