Re: [PATCH v4 3/3] PCI: imx6: Add code to support i.MX7D

[Bjorn Helgaas]

On Wed, Feb 15, 2017 at 11:17:00AM -0600, Rob Herring wrote:
> On Tue, Feb 07, 2017 at 07:50:27AM -0800, Andrey Smirnov wrote:
> > Add various bits of code needed to support i.MX7D variant of the IP.
> > 
> > Cc: yurovsky@xxxxxxxxx
> > Cc: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> > Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> > Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> > Cc: Mark Rutland <mark.rutland@xxxxxxx>
> > Cc: Lee Jones <lee.jones@xxxxxxxxxx>
> > Cc: Fabio Estevam <fabio.estevam@xxxxxxx>
> > Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> > Cc: devicetree@xxxxxxxxxxxxxxx
> > Cc: linux-kernel@xxxxxxxxxxxxxxx
> > Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
> > ---
> >  .../devicetree/bindings/pci/fsl,imx6q-pcie.txt     |  13 ++-
> >  drivers/pci/host/pci-imx6.c                        | 121 ++++++++++++++++-----
> >  include/linux/mfd/syscon/imx7-iomuxc-gpr.h         |   4 +
> >  3 files changed, 112 insertions(+), 26 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> > index 83aeb1f..11db2ab 100644
> > --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> > +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> > @@ -4,7 +4,11 @@ This PCIe host controller is based on the Synopsis Designware PCIe IP
> >  and thus inherits all the common properties defined in designware-pcie.txt.
> >  
> >  Required properties:
> > -- compatible: "fsl,imx6q-pcie", "fsl,imx6sx-pcie", "fsl,imx6qp-pcie"
> > +- compatible:
> > +	- "fsl,imx6q-pcie"
> > +	- "fsl,imx6sx-pcie",
> > +	- "fsl,imx6qp-pcie"
> > +	- "fsl,imx7d-pcie"
> >  - reg: base address and length of the PCIe controller
> >  - interrupts: A list of interrupt outputs of the controller. Must contain an
> >    entry for each entry in the interrupt-names property.
> > @@ -34,6 +38,13 @@ Additional required properties for imx6sx-pcie:
> >  - clock names: Must include the following additional entries:
> >  	- "pcie_inbound_axi"
> >  
> > +Additional required properties for imx7d-pcie:
> > +- power-domains: Must be set to a phandle pointing to PCIE_PHY power domain
> 
> This domain is just the PHY? Seems like this needs a separate PHY 
> driver.
> 
> > +- resets: Must contain phandles to PCIE related reset lines exposed by SRC IP block
> > +- reset-names: Must contain the following entires:
> > +  	       - "pciephy"
> 
> And for this too.
> 
> > +	       - "apps"
> > +
> >  Example:
> >  
> >  	pcie@0x01000000 {
> 
> [...]
> 
> > @@ -251,6 +261,10 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
> >  	u32 val, gpr1, gpr12;
> >  
> >  	switch (imx6_pcie->variant) {
> > +	case IMX7D:
> > +		reset_control_assert(imx6_pcie->pciephy_reset);
> > +		reset_control_assert(imx6_pcie->apps_reset);
> > +		break;
> >  	case IMX6SX:
> >  		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
> >  				   IMX6SX_GPR12_PCIE_TEST_POWERDOWN,
> 
> So the difference with i.MX7D is not really that it has a reset or not, 
> but some platforms use a reset driver and some do not. The latter should 
> be fixed.

I have this patch queued for v4.11.  Are these things that should be
fixed first?  If so, I can drop this.

Bjorn