Re: [PATCH V10 07/10] efi: print unrecognized CPER section

[Baicar, Tyler]

Hello Joe,


On 2/15/2017 1:07 PM, Joe Perches wrote:
> On Wed, 2017-02-15 at 12:51 -0700, Tyler Baicar wrote:
> > UEFI spec allows for non-standard section in Common Platform Error
> > Record. This is defined in section N.2.3 of UEFI version 2.5.
> >
> > Currently if the CPER section's type (UUID) does not match with
> > one of the section types that the kernel knows how to parse, the
> > section is skipped. Therefore, user is not able to see
> > such CPER data, for instance, error record of non-standard section.
> >
> > For above mentioned case, this change prints out the raw data in
> > hex in dmesg buffer. Data length is taken from Error Data length
> > field of Generic Error Data Entry.
> >
> > Following is a sample output from dmesg:
> > [  115.771702] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 2
> > [  115.779042] {1}[Hardware Error]: It has been corrected by h/w and requires no further action
> > [  115.787456] {1}[Hardware Error]: event severity: corrected
> > [  115.792927] {1}[Hardware Error]:  Error 0, type: corrected
> > [  115.798415] {1}[Hardware Error]:  fru_id: 00000000-0000-0000-0000-000000000000
> > [  115.805596] {1}[Hardware Error]:  fru_text:
> > [  115.816105] {1}[Hardware Error]:  section type: d2e2621c-f936-468d-0d84-15a4ed015c8b
> > [  115.823880] {1}[Hardware Error]:  section length: 88
> > [  115.828779] {1}[Hardware Error]:   00000000: 01000001 00000002 5f434345 525f4543
> > [  115.836153] {1}[Hardware Error]:   00000010: 0000574d 00000000 00000000 00000000
> > [  115.843531] {1}[Hardware Error]:   00000020: 00000000 00000000 00000000 00000000
> > [  115.850908] {1}[Hardware Error]:   00000030: 00000000 00000000 00000000 00000000
> > [  115.858288] {1}[Hardware Error]:   00000040: fe800000 00000000 00000004 5f434345
> > [  115.865665] {1}[Hardware Error]:   00000050: 525f4543 0000574d
> >
> > Signed-off-by: Tyler Baicar <tbaicar@xxxxxxxxxxxxxx>
> > Signed-off-by: Jonathan (Zhixiong) Zhang <zjzhang@xxxxxxxxxxxxxx>
> > ---
> >   drivers/firmware/efi/cper.c | 12 ++++++++++--
> >   1 file changed, 10 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c
> > index c2b0a12..48cb8ee 100644
> > --- a/drivers/firmware/efi/cper.c
> > +++ b/drivers/firmware/efi/cper.c
> > @@ -591,8 +591,16 @@ static void cper_estatus_print_section(
> >   			cper_print_proc_arm(newpfx, arm_err);
> >   		else
> >   			goto err_section_too_small;
> > -	} else
> > -		printk("%s""section type: unknown, %pUl\n", newpfx, sec_type);
> > +	} else {
> > +		const void *unknown_err;
> > +
> > +		unknown_err = acpi_hest_generic_data_payload(gdata);
> > +		printk("%ssection type: %pUl\n", newpfx, sec_type);
> > +		printk("%ssection length: %d\n", newpfx,
> > +		       gdata->error_data_length);
> > +		print_hex_dump(newpfx, "", DUMP_PREFIX_OFFSET, 16, 4,
> > +			       unknown_err, gdata->error_data_length, 0);
> I suggest using true instead of 0 for the last argument
>
> 		print_hex_dump(newpfx, "", DUMP_PREFIX_OFFSET, 16, 4,
> 			       unknown_err, gdata->error_data_length, true);
>
> It might help make deciphering the hex block a little easier.
Thank you for the suggestion, I agree and will make this change. There 
is also a vendor specific portion of the ARM error which is just a hex 
dump. I will enable the ascii printing there as well.

Thanks,
Tyler

--
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.