Re: [PATCH] net: ethernet: cadence: Add fixed-link functionality
From: Florian Fainelli
Date: Wed Feb 15 2017 - 15:58:03 EST
On 02/15/2017 12:44 PM, mdf@xxxxxxxxxx wrote:
> From: Moritz Fischer <mdf@xxxxxxxxxx>
>
> This allows 'fixed-link' direct MAC connections to be declared
> in devicetree.
>
> Signed-off-by: Moritz Fischer <mdf@xxxxxxxxxx>
> Cc: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
> ---
> drivers/net/ethernet/cadence/macb.c | 61 ++++++++++++++++++++++++++++++++++---
> drivers/net/ethernet/cadence/macb.h | 1 +
> 2 files changed, 57 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
> index 30606b1..af443a8 100644
> --- a/drivers/net/ethernet/cadence/macb.c
> +++ b/drivers/net/ethernet/cadence/macb.c
> @@ -469,6 +469,34 @@ static int macb_mii_probe(struct net_device *dev)
> return 0;
> }
>
> +static int macb_fixed_init(struct macb *bp)
> +{
> + struct phy_device *phydev;
> +
> + phydev = of_phy_connect(bp->dev, bp->phy_node,
> + &macb_handle_link_change, 0,
> + bp->phy_interface);
> + if (!phydev)
> + return -ENODEV;
> +
> + /* mask with MAC supported features */
> + if (macb_is_gem(bp) && bp->caps & MACB_CAPS_GIGABIT_MODE_AVAILABLE)
> + phydev->supported &= PHY_GBIT_FEATURES;
> + else
> + phydev->supported &= PHY_BASIC_FEATURES;
> +
> + if (bp->caps & MACB_CAPS_NO_GIGABIT_HALF)
> + phydev->supported &= ~SUPPORTED_1000baseT_Half;
> +
> + phydev->advertising = phydev->supported;
> +
> + bp->link = 0;
> + bp->speed = 0;
> + bp->duplex = -1;
> +
> + return 0;
> +}
This is nearly identical to macb_mii_probe(), can you try to re-use what
is done there and just extract the phy_find_first() part which is
different here?
> +
> static int macb_mii_init(struct macb *bp)
> {
> struct macb_platform_data *pdata;
> @@ -3245,6 +3273,7 @@ static int macb_probe(struct platform_device *pdev)
> const char *mac;
> struct macb *bp;
> int err;
> + bool fixed_link = false;
>
> regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> mem = devm_ioremap_resource(&pdev->dev, regs);
> @@ -3342,8 +3371,18 @@ static int macb_probe(struct platform_device *pdev)
> macb_get_hwaddr(bp);
>
> /* Power up the PHY if there is a GPIO reset */
> - phy_node = of_get_next_available_child(np, NULL);
> - if (phy_node) {
> + phy_node = of_parse_phandle(np, "phy-handle", 0);
> + if (!phy_node && of_phy_is_fixed_link(np)) {
> + err = of_phy_register_fixed_link(np);
> + if (err < 0) {
> + dev_err(&pdev->dev, "broken fixed-link specification");
> + goto failed_phy;
> + }
> + /* in case of a fixed PHY, the DT node is the ethernet MAC */
> + phy_node = of_node_get(np);
> + bp->phy_node = phy_node;
> + fixed_link = true;
> + } else {
> int gpio = of_get_named_gpio(phy_node, "reset-gpios", 0);
>
> if (gpio_is_valid(gpio)) {
> @@ -3369,7 +3408,10 @@ static int macb_probe(struct platform_device *pdev)
> if (err)
> goto err_out_free_netdev;
>
> - err = macb_mii_init(bp);
> + if (!fixed_link)
> + err = macb_mii_init(bp);
> + else
> + err = macb_fixed_init(bp);
> if (err)
> goto err_out_free_netdev;
>
> @@ -3400,6 +3442,9 @@ static int macb_probe(struct platform_device *pdev)
> if (bp->reset_gpio)
> gpiod_set_value(bp->reset_gpio, 0);
>
> +failed_phy:
> + of_node_put(phy_node);
> +
> err_out_free_netdev:
> free_netdev(dev);
>
> @@ -3423,9 +3468,14 @@ static int macb_remove(struct platform_device *pdev)
> bp = netdev_priv(dev);
> if (dev->phydev)
> phy_disconnect(dev->phydev);
> - mdiobus_unregister(bp->mii_bus);
> +
> + if (!bp->phy_node)
> + mdiobus_unregister(bp->mii_bus);
> +
> dev->phydev = NULL;
> - mdiobus_free(bp->mii_bus);
> +
> + if (!bp->phy_node)
> + mdiobus_free(bp->mii_bus);
Humm, I'd have to read the code a bit more, but conceptually, you could
declare child MDIO device nodes (e.g: Ethernet switch) and a fixed-link
that describes how you are connecting to that Ethernet switch. The MDIO
devices require the MDIO bus to be available, so I don't think you can
treat fixed-link as mutually exclusive with an absence of PHY nodes.
--
Florian