[PATCH 3.2 095/126] locking/rtmutex: Prevent dequeue vs. unlock race

[Ben Hutchings]

3.2.85-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>

commit dbb26055defd03d59f678cb5f2c992abe05b064a upstream.

David reported a futex/rtmutex state corruption. It's caused by the
following problem:

CPU0		CPU1		CPU2

l->owner=T1
		rt_mutex_lock(l)
		lock(l->wait_lock)
		l->owner = T1 | HAS_WAITERS;
		enqueue(T2)
		boost()
		  unlock(l->wait_lock)
		schedule()

				rt_mutex_lock(l)
				lock(l->wait_lock)
				l->owner = T1 | HAS_WAITERS;
				enqueue(T3)
				boost()
				  unlock(l->wait_lock)
				schedule()
		signal(->T2)	signal(->T3)
		lock(l->wait_lock)
		dequeue(T2)
		deboost()
		  unlock(l->wait_lock)
				lock(l->wait_lock)
				dequeue(T3)
				  ===> wait list is now empty
				deboost()
				 unlock(l->wait_lock)
		lock(l->wait_lock)
		fixup_rt_mutex_waiters()
		  if (wait_list_empty(l)) {
		    owner = l->owner & ~HAS_WAITERS;
		    l->owner = owner
		     ==> l->owner = T1
		  }

				lock(l->wait_lock)
rt_mutex_unlock(l)		fixup_rt_mutex_waiters()
				  if (wait_list_empty(l)) {
				    owner = l->owner & ~HAS_WAITERS;
cmpxchg(l->owner, T1, NULL)
 ===> Success (l->owner = NULL)
				    l->owner = owner
				     ==> l->owner = T1
				  }

That means the problem is caused by fixup_rt_mutex_waiters() which does the
RMW to clear the waiters bit unconditionally when there are no waiters in
the rtmutexes rbtree.

This can be fatal: A concurrent unlock can release the rtmutex in the
fastpath because the waiters bit is not set. If the cmpxchg() gets in the
middle of the RMW operation then the previous owner, which just unlocked
the rtmutex is set as the owner again when the write takes place after the
successfull cmpxchg().

The solution is rather trivial: verify that the owner member of the rtmutex
has the waiters bit set before clearing it. This does not require a
cmpxchg() or other atomic operations because the waiters bit can only be
set and cleared with the rtmutex wait_lock held. It's also safe against the
fast path unlock attempt. The unlock attempt via cmpxchg() will either see
the bit set and take the slowpath or see the bit cleared and release it
atomically in the fastpath.

It's remarkable that the test program provided by David triggers on ARM64
and MIPS64 really quick, but it refuses to reproduce on x86-64, while the
problem exists there as well. That refusal might explain that this got not
discovered earlier despite the bug existing from day one of the rtmutex
implementation more than 10 years ago.

Thanks to David for meticulously instrumenting the code and providing the
information which allowed to decode this subtle problem.

Reported-by: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
Tested-by: David Daney <david.daney@xxxxxxxxxx>
Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Reviewed-by: Steven Rostedt <rostedt@xxxxxxxxxxx>
Acked-by: Peter Zijlstra (Intel) <peterz@xxxxxxxxxxxxx>
Cc: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Cc: Sebastian Siewior <bigeasy@xxxxxxxxxxxxx>
Cc: Will Deacon <will.deacon@xxxxxxx>
Fixes: 23f78d4a03c5 ("[PATCH] pi-futex: rt mutex core")
Link: http://lkml.kernel.org/r/20161130210030.351136722@xxxxxxxxxxxxx
Signed-off-by: Ingo Molnar <mingo@xxxxxxxxxx>
[bwh: Backported to 3.2:
 - Use ACCESS_ONCE() instead of {READ,WRITE}_ONCE()
 - Adjust filename]
Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
---
 kernel/rtmutex.c | 68 ++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 66 insertions(+), 2 deletions(-)

--- a/kernel/rtmutex.c
+++ b/kernel/rtmutex.c
@@ -63,8 +63,72 @@ static inline void clear_rt_mutex_waiter
 
 static void fixup_rt_mutex_waiters(struct rt_mutex *lock)
 {
-	if (!rt_mutex_has_waiters(lock))
-		clear_rt_mutex_waiters(lock);
+	unsigned long owner, *p = (unsigned long *) &lock->owner;
+
+	if (rt_mutex_has_waiters(lock))
+		return;
+
+	/*
+	 * The rbtree has no waiters enqueued, now make sure that the
+	 * lock->owner still has the waiters bit set, otherwise the
+	 * following can happen:
+	 *
+	 * CPU 0	CPU 1		CPU2
+	 * l->owner=T1
+	 *		rt_mutex_lock(l)
+	 *		lock(l->lock)
+	 *		l->owner = T1 | HAS_WAITERS;
+	 *		enqueue(T2)
+	 *		boost()
+	 *		  unlock(l->lock)
+	 *		block()
+	 *
+	 *				rt_mutex_lock(l)
+	 *				lock(l->lock)
+	 *				l->owner = T1 | HAS_WAITERS;
+	 *				enqueue(T3)
+	 *				boost()
+	 *				  unlock(l->lock)
+	 *				block()
+	 *		signal(->T2)	signal(->T3)
+	 *		lock(l->lock)
+	 *		dequeue(T2)
+	 *		deboost()
+	 *		  unlock(l->lock)
+	 *				lock(l->lock)
+	 *				dequeue(T3)
+	 *				 ==> wait list is empty
+	 *				deboost()
+	 *				 unlock(l->lock)
+	 *		lock(l->lock)
+	 *		fixup_rt_mutex_waiters()
+	 *		  if (wait_list_empty(l) {
+	 *		    l->owner = owner
+	 *		    owner = l->owner & ~HAS_WAITERS;
+	 *		      ==> l->owner = T1
+	 *		  }
+	 *				lock(l->lock)
+	 * rt_mutex_unlock(l)		fixup_rt_mutex_waiters()
+	 *				  if (wait_list_empty(l) {
+	 *				    owner = l->owner & ~HAS_WAITERS;
+	 * cmpxchg(l->owner, T1, NULL)
+	 *  ===> Success (l->owner = NULL)
+	 *
+	 *				    l->owner = owner
+	 *				      ==> l->owner = T1
+	 *				  }
+	 *
+	 * With the check for the waiter bit in place T3 on CPU2 will not
+	 * overwrite. All tasks fiddling with the waiters bit are
+	 * serialized by l->lock, so nothing else can modify the waiters
+	 * bit. If the bit is set then nothing can change l->owner either
+	 * so the simple RMW is safe. The cmpxchg() will simply fail if it
+	 * happens in the middle of the RMW because the waiters bit is
+	 * still set.
+	 */
+	owner = ACCESS_ONCE(*p);
+	if (owner & RT_MUTEX_HAS_WAITERS)
+		ACCESS_ONCE(*p) = owner & ~RT_MUTEX_HAS_WAITERS;
 }
 
 /*