[PATCH v7 1/3] dt: bindings: add documentation for zx2967 family i2c controller
From: Baoyou Xie
Date: Thu Feb 16 2017 - 01:01:28 EST
This patch adds dt-binding documentation for zx2967 family
i2c controller.
Signed-off-by: Baoyou Xie <baoyou.xie@xxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
---
.../devicetree/bindings/i2c/i2c-zx2967.txt | 24 ++++++++++++++++++++++
1 file changed, 24 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-zx2967.txt
diff --git a/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt b/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt
new file mode 100644
index 0000000..a528374
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt
@@ -0,0 +1,24 @@
+ZTE zx2967 I2C controller
+
+Required properties:
+ - compatible: must be "zte,zx296718-i2c"
+ - reg: physical address and length of the device registers
+ - interrupts: a single interrupt specifier
+ - clocks: clock for the device
+ - #address-cells: should be <1>
+ - #size-cells: should be <0>
+ - clock-frequency: the desired I2C bus clock frequency.
+
+Examples:
+
+ i2c@112000 {
+ compatible = "zte,zx296718-i2c";
+ reg = <0x00112000 0x1000>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24m>;
+ #address-cells = <1>
+ #size-cells = <0>;
+ clock-frequency = <1600000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_global_pin>;
+ };
--
2.7.4