Re: [PATCH v4 01/36] [media] dt-bindings: Add bindings for i.MX media driver

[Steve Longerbeam]

On 02/16/2017 03:54 AM, Philipp Zabel wrote:
> On Wed, 2017-02-15 at 18:19 -0800, Steve Longerbeam wrote:
> > Add bindings documentation for the i.MX media driver.
> >
> > Signed-off-by: Steve Longerbeam <steve_longerbeam@xxxxxxxxxx>
> > ---
> >  Documentation/devicetree/bindings/media/imx.txt | 66 +++++++++++++++++++++++++
> >  1 file changed, 66 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/imx.txt
> >
> > diff --git a/Documentation/devicetree/bindings/media/imx.txt b/Documentation/devicetree/bindings/media/imx.txt
> > new file mode 100644
> > index 0000000..fd5af50
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/imx.txt
> > @@ -0,0 +1,66 @@
> > +Freescale i.MX Media Video Device
> > +=================================
> > +
> > +Video Media Controller node
> > +---------------------------
> > +
> > +This is the media controller node for video capture support. It is a
> > +virtual device that lists the camera serial interface nodes that the
> > +media device will control.
> > +
> > +Required properties:
> > +- compatible : "fsl,imx-capture-subsystem";
> > +- ports      : Should contain a list of phandles pointing to camera
> > +		sensor interface ports of IPU devices
> > +
> > +example:
> > +
> > +capture-subsystem {
> > +	compatible = "fsl,capture-subsystem";
>
> "fsl,imx-capture-subsystem"


Fixed.

Steve