[PATCH] net: qlogic: netxen: use new api ethtool_{get|set}_link_ksettings
From: Philippe Reynes
Date: Thu Feb 16 2017 - 17:28:15 EST
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
As I don't have the hardware, I'd be very pleased if
someone may test this patch.
Signed-off-by: Philippe Reynes <tremyfr@xxxxxxxxx>
---
.../ethernet/qlogic/netxen/netxen_nic_ethtool.c | 123 ++++++++++---------
1 files changed, 65 insertions(+), 58 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c
index f903446..3157f97 100644
--- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c
@@ -96,69 +96,70 @@ static int netxen_nic_get_eeprom_len(struct net_device *dev)
}
static int
-netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+netxen_nic_get_link_ksettings(struct net_device *dev,
+ struct ethtool_link_ksettings *cmd)
{
struct netxen_adapter *adapter = netdev_priv(dev);
int check_sfp_module = 0;
+ u32 supported, advertising;
/* read which mode */
if (adapter->ahw.port_type == NETXEN_NIC_GBE) {
- ecmd->supported = (SUPPORTED_10baseT_Half |
+ supported = (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full);
- ecmd->advertising = (ADVERTISED_100baseT_Half |
+ advertising = (ADVERTISED_100baseT_Half |
ADVERTISED_100baseT_Full |
ADVERTISED_1000baseT_Half |
ADVERTISED_1000baseT_Full);
- ecmd->port = PORT_TP;
+ cmd->base.port = PORT_TP;
- ethtool_cmd_speed_set(ecmd, adapter->link_speed);
- ecmd->duplex = adapter->link_duplex;
- ecmd->autoneg = adapter->link_autoneg;
+ cmd->base.speed = adapter->link_speed;
+ cmd->base.duplex = adapter->link_duplex;
+ cmd->base.autoneg = adapter->link_autoneg;
} else if (adapter->ahw.port_type == NETXEN_NIC_XGBE) {
u32 val;
val = NXRD32(adapter, NETXEN_PORT_MODE_ADDR);
if (val == NETXEN_PORT_MODE_802_3_AP) {
- ecmd->supported = SUPPORTED_1000baseT_Full;
- ecmd->advertising = ADVERTISED_1000baseT_Full;
+ supported = SUPPORTED_1000baseT_Full;
+ advertising = ADVERTISED_1000baseT_Full;
} else {
- ecmd->supported = SUPPORTED_10000baseT_Full;
- ecmd->advertising = ADVERTISED_10000baseT_Full;
+ supported = SUPPORTED_10000baseT_Full;
+ advertising = ADVERTISED_10000baseT_Full;
}
if (netif_running(dev) && adapter->has_link_events) {
- ethtool_cmd_speed_set(ecmd, adapter->link_speed);
- ecmd->autoneg = adapter->link_autoneg;
- ecmd->duplex = adapter->link_duplex;
+ cmd->base.speed = adapter->link_speed;
+ cmd->base.autoneg = adapter->link_autoneg;
+ cmd->base.duplex = adapter->link_duplex;
goto skip;
}
- ecmd->port = PORT_TP;
+ cmd->base.port = PORT_TP;
if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
u16 pcifn = adapter->ahw.pci_func;
val = NXRD32(adapter, P3_LINK_SPEED_REG(pcifn));
- ethtool_cmd_speed_set(ecmd, P3_LINK_SPEED_MHZ *
- P3_LINK_SPEED_VAL(pcifn, val));
+ cmd->base.speed = P3_LINK_SPEED_MHZ *
+ P3_LINK_SPEED_VAL(pcifn, val);
} else
- ethtool_cmd_speed_set(ecmd, SPEED_10000);
+ cmd->base.speed = SPEED_10000;
- ecmd->duplex = DUPLEX_FULL;
- ecmd->autoneg = AUTONEG_DISABLE;
+ cmd->base.duplex = DUPLEX_FULL;
+ cmd->base.autoneg = AUTONEG_DISABLE;
} else
return -EIO;
skip:
- ecmd->phy_address = adapter->physical_port;
- ecmd->transceiver = XCVR_EXTERNAL;
+ cmd->base.phy_address = adapter->physical_port;
switch (adapter->ahw.board_type) {
case NETXEN_BRDTYPE_P2_SB35_4G:
@@ -167,16 +168,16 @@ static int netxen_nic_get_eeprom_len(struct net_device *dev)
case NETXEN_BRDTYPE_P3_4_GB:
case NETXEN_BRDTYPE_P3_4_GB_MM:
- ecmd->supported |= SUPPORTED_Autoneg;
- ecmd->advertising |= ADVERTISED_Autoneg;
+ supported |= SUPPORTED_Autoneg;
+ advertising |= ADVERTISED_Autoneg;
case NETXEN_BRDTYPE_P2_SB31_10G_CX4:
case NETXEN_BRDTYPE_P3_10G_CX4:
case NETXEN_BRDTYPE_P3_10G_CX4_LP:
case NETXEN_BRDTYPE_P3_10000_BASE_T:
- ecmd->supported |= SUPPORTED_TP;
- ecmd->advertising |= ADVERTISED_TP;
- ecmd->port = PORT_TP;
- ecmd->autoneg = (adapter->ahw.board_type ==
+ supported |= SUPPORTED_TP;
+ advertising |= ADVERTISED_TP;
+ cmd->base.port = PORT_TP;
+ cmd->base.autoneg = (adapter->ahw.board_type ==
NETXEN_BRDTYPE_P2_SB31_10G_CX4) ?
(AUTONEG_DISABLE) : (adapter->link_autoneg);
break;
@@ -185,39 +186,39 @@ static int netxen_nic_get_eeprom_len(struct net_device *dev)
case NETXEN_BRDTYPE_P3_IMEZ:
case NETXEN_BRDTYPE_P3_XG_LOM:
case NETXEN_BRDTYPE_P3_HMEZ:
- ecmd->supported |= SUPPORTED_MII;
- ecmd->advertising |= ADVERTISED_MII;
- ecmd->port = PORT_MII;
- ecmd->autoneg = AUTONEG_DISABLE;
+ supported |= SUPPORTED_MII;
+ advertising |= ADVERTISED_MII;
+ cmd->base.port = PORT_MII;
+ cmd->base.autoneg = AUTONEG_DISABLE;
break;
case NETXEN_BRDTYPE_P3_10G_SFP_PLUS:
case NETXEN_BRDTYPE_P3_10G_SFP_CT:
case NETXEN_BRDTYPE_P3_10G_SFP_QT:
- ecmd->advertising |= ADVERTISED_TP;
- ecmd->supported |= SUPPORTED_TP;
+ advertising |= ADVERTISED_TP;
+ supported |= SUPPORTED_TP;
check_sfp_module = netif_running(dev) &&
adapter->has_link_events;
case NETXEN_BRDTYPE_P2_SB31_10G:
case NETXEN_BRDTYPE_P3_10G_XFP:
- ecmd->supported |= SUPPORTED_FIBRE;
- ecmd->advertising |= ADVERTISED_FIBRE;
- ecmd->port = PORT_FIBRE;
- ecmd->autoneg = AUTONEG_DISABLE;
+ supported |= SUPPORTED_FIBRE;
+ advertising |= ADVERTISED_FIBRE;
+ cmd->base.port = PORT_FIBRE;
+ cmd->base.autoneg = AUTONEG_DISABLE;
break;
case NETXEN_BRDTYPE_P3_10G_TP:
if (adapter->ahw.port_type == NETXEN_NIC_XGBE) {
- ecmd->autoneg = AUTONEG_DISABLE;
- ecmd->supported |= (SUPPORTED_FIBRE | SUPPORTED_TP);
- ecmd->advertising |=
+ cmd->base.autoneg = AUTONEG_DISABLE;
+ supported |= (SUPPORTED_FIBRE | SUPPORTED_TP);
+ advertising |=
(ADVERTISED_FIBRE | ADVERTISED_TP);
- ecmd->port = PORT_FIBRE;
+ cmd->base.port = PORT_FIBRE;
check_sfp_module = netif_running(dev) &&
adapter->has_link_events;
} else {
- ecmd->supported |= (SUPPORTED_TP | SUPPORTED_Autoneg);
- ecmd->advertising |=
+ supported |= (SUPPORTED_TP | SUPPORTED_Autoneg);
+ advertising |=
(ADVERTISED_TP | ADVERTISED_Autoneg);
- ecmd->port = PORT_TP;
+ cmd->base.port = PORT_TP;
}
break;
default:
@@ -232,31 +233,37 @@ static int netxen_nic_get_eeprom_len(struct net_device *dev)
case LINKEVENT_MODULE_OPTICAL_SRLR:
case LINKEVENT_MODULE_OPTICAL_LRM:
case LINKEVENT_MODULE_OPTICAL_SFP_1G:
- ecmd->port = PORT_FIBRE;
+ cmd->base.port = PORT_FIBRE;
break;
case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLE:
case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLELEN:
case LINKEVENT_MODULE_TWINAX:
- ecmd->port = PORT_TP;
+ cmd->base.port = PORT_TP;
break;
default:
- ecmd->port = -1;
+ cmd->base.port = -1;
}
}
if (!netif_running(dev) || !adapter->ahw.linkup) {
- ecmd->duplex = DUPLEX_UNKNOWN;
- ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN);
+ cmd->base.duplex = DUPLEX_UNKNOWN;
+ cmd->base.speed = SPEED_UNKNOWN;
}
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+ supported);
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
+ advertising);
+
return 0;
}
static int
-netxen_nic_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+netxen_nic_set_link_ksettings(struct net_device *dev,
+ const struct ethtool_link_ksettings *cmd)
{
struct netxen_adapter *adapter = netdev_priv(dev);
- u32 speed = ethtool_cmd_speed(ecmd);
+ u32 speed = cmd->base.speed;
int ret;
if (adapter->ahw.port_type != NETXEN_NIC_GBE)
@@ -265,16 +272,16 @@ static int netxen_nic_get_eeprom_len(struct net_device *dev)
if (!(adapter->capabilities & NX_FW_CAPABILITY_GBE_LINK_CFG))
return -EOPNOTSUPP;
- ret = nx_fw_cmd_set_gbe_port(adapter, speed, ecmd->duplex,
- ecmd->autoneg);
+ ret = nx_fw_cmd_set_gbe_port(adapter, speed, cmd->base.duplex,
+ cmd->base.autoneg);
if (ret == NX_RCODE_NOT_SUPPORTED)
return -EOPNOTSUPP;
else if (ret)
return -EIO;
adapter->link_speed = speed;
- adapter->link_duplex = ecmd->duplex;
- adapter->link_autoneg = ecmd->autoneg;
+ adapter->link_duplex = cmd->base.duplex;
+ adapter->link_autoneg = cmd->base.autoneg;
if (!netif_running(dev))
return 0;
@@ -931,8 +938,6 @@ static int netxen_get_intr_coalesce(struct net_device *netdev,
}
const struct ethtool_ops netxen_nic_ethtool_ops = {
- .get_settings = netxen_nic_get_settings,
- .set_settings = netxen_nic_set_settings,
.get_drvinfo = netxen_nic_get_drvinfo,
.get_regs_len = netxen_nic_get_regs_len,
.get_regs = netxen_nic_get_regs,
@@ -954,4 +959,6 @@ static int netxen_get_intr_coalesce(struct net_device *netdev,
.get_dump_flag = netxen_get_dump_flag,
.get_dump_data = netxen_get_dump_data,
.set_dump = netxen_set_dump,
+ .get_link_ksettings = netxen_nic_get_link_ksettings,
+ .set_link_ksettings = netxen_nic_set_link_ksettings,
};
--
1.7.4.4