Re: [PATCH 1/1] rtc: cpcap: new rtc driver

From: Tony Lindgren
Date: Mon Feb 20 2017 - 12:27:51 EST


* Tony Lindgren <tony@xxxxxxxxxxx> [170220 09:21]:
> * Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx> [170220 08:40]:
> > On 20/02/2017 at 08:31:56 -0800, Tony Lindgren wrote:
> > > * Sebastian Reichel <sre@xxxxxxxxxx> [170219 23:37]:
> > > > This driver supports the Motorola CPCAP PMIC found on
> > > > some of Motorola's mobile phones, such as the Droid 4.
> > >
> > > Hey that's cool, works for me for reading and setting date :)
> > > Just noticed one thing, see below.
> > >
> > > > +Requires node properties:
> > > > +- compatible: should contain "motorola,cpcap-rtc"
> > > > +- interrupts: An interrupt specifier for alarm and 1 Hz irq
> > > > +
> > > > +Example:
> > > > +
> > > > +cpcap_rtc: rtc {
> > > > + compatible = "motorola,cpcap-rtc";
> > > > + interrupts = <39 IRQ_TYPE_NONE>, <26 IRQ_TYPE_NONE>;
> > > > +};
> > >
> > > I tried rtcwake -s 3, but got the following:
> > >
> > > rtcwake: cannot open /sys/class/rtc/rtc0/device/power/wakeup:
> > > No such file or directory
> > > rtcwake: /dev/rtc0 not enabled for wakeup events
> > >
> > > Then tried adding "wakeup-source" to above but I think the driver
> > > needs something, maybe probably just PM ops?
> > >
> >
> > Probably device_init_wakeup(dev, 1) ?
>
> That gets us a bit closer but now produces:
>
> rtcwake: write error

Oh user error.. It needs to be done with:

# rtcwake -s 3 -m mem

And with the addition of device_init_wakeup(dev, 1) to the probe
it works for me. So Sebastian, with that change, please feel free
to add:

Tested-by: Tony Lindgren <tony@xxxxxxxxxxx>