Re: [PATCH v2 2/4] arm: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 10.1 initial support

[Fabio Estevam]

On Mon, Feb 20, 2017 at 5:05 PM, Jagan Teki <jagan@xxxxxxxxxxxx> wrote:

> +&ldb {
> +       status = "okay";
> +
> +       lvds-channel@0 {
> +               fsl,data-mapping = "spwg";
> +               fsl,data-width = <24>;
> +               status = "okay";
> +
> +               display-timings {
> +                        native-mode = <&timing1>;
> +                        timing1: hsd100pxn1 {
> +                                clock-frequency = <60000000>;
> +                                hactive = <1280>;
> +                                vactive = <800>;
> +                                hback-porch = <40>;
> +                                hfront-porch = <40>;
> +                                vback-porch = <10>;
> +                                vfront-porch = <3>;
> +                                hsync-len = <80>;
> +                                vsync-len = <10>;

hsd100pxn1 is supported by the drm simple panel driver.

This allows you to remove the display-timings from the dts and use
compatible = "hannstar,hsd100pxn1" instead.