Re: [PATCH 5/7] clk: tegra: don't warn for PLL defaults unnecessarily

[Mikko Perttunen]

Reviewed-by: Mikko Perttunen <mperttunen@xxxxxxxxxx>

On 22.02.2017 17:14, Peter De Schrijver wrote:
> If the PLL is on, only warn if the defaults are not yet set. Otherwise be
> silent.
>
> Signed-off-by: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
> ---
>  drivers/clk/tegra/clk-tegra210.c | 18 ++++++++++++------
>  1 file changed, 12 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
> index b7ef8a7..fe698d2 100644
> --- a/drivers/clk/tegra/clk-tegra210.c
> +++ b/drivers/clk/tegra/clk-tegra210.c
> @@ -502,7 +502,7 @@ static void tegra210_pllcx_set_defaults(const char *name,
>  	pllcx->params->defaults_set = true;
>
>  	if (readl_relaxed(clk_base + pllcx->params->base_reg) &
> -			PLL_ENABLE) {
> +			PLL_ENABLE && !pllcx->params->defaults_set) {
>  		/* PLL is ON: only check if defaults already set */
>  		pllcx_check_defaults(pllcx->params);
>  		pr_warn("%s already enabled. Postponing set full defaults\n",
> @@ -608,7 +608,6 @@ static void tegra210_plld_set_defaults(struct tegra_clk_pll *plld)
>
>  	if (readl_relaxed(clk_base + plld->params->base_reg) &
>  			PLL_ENABLE) {
> -		pr_warn("PLL_D already enabled. Postponing set full defaults\n");
>
>  		/*
>  		 * PLL is ON: check if defaults already set, then set those
> @@ -625,6 +624,9 @@ static void tegra210_plld_set_defaults(struct tegra_clk_pll *plld)
>  		_pll_misc_chk_default(clk_base, plld->params, 0, val,
>  				~mask & PLLD_MISC0_WRITE_MASK);
>
> +		if (!plld->params->defaults_set)
> +			pr_warn("PLL_D already enabled. Postponing set full defaults\n");
> +
>  		/* Enable lock detect */
>  		mask = PLLD_MISC0_LOCK_ENABLE | PLLD_MISC0_LOCK_OVERRIDE;
>  		val = readl_relaxed(clk_base + plld->params->ext_misc_reg[0]);
> @@ -896,7 +898,6 @@ static void tegra210_pllx_set_defaults(struct tegra_clk_pll *pllx)
>  	val |= step_b << PLLX_MISC2_DYNRAMP_STEPB_SHIFT;
>
>  	if (readl_relaxed(clk_base + pllx->params->base_reg) & PLL_ENABLE) {
> -		pr_warn("PLL_X already enabled. Postponing set full defaults\n");
>
>  		/*
>  		 * PLL is ON: check if defaults already set, then set those
> @@ -904,6 +905,8 @@ static void tegra210_pllx_set_defaults(struct tegra_clk_pll *pllx)
>  		 */
>  		pllx_check_defaults(pllx);
>
> +		if (!pllx->params->defaults_set)
> +			pr_warn("PLL_X already enabled. Postponing set full defaults\n");
>  		/* Configure dyn ramp, disable lock override */
>  		writel_relaxed(val, clk_base + pllx->params->ext_misc_reg[2]);
>
> @@ -948,7 +951,6 @@ static void tegra210_pllmb_set_defaults(struct tegra_clk_pll *pllmb)
>  	pllmb->params->defaults_set = true;
>
>  	if (val & PLL_ENABLE) {
> -		pr_warn("PLL_MB already enabled. Postponing set full defaults\n");
>
>  		/*
>  		 * PLL is ON: check if defaults already set, then set those
> @@ -959,6 +961,8 @@ static void tegra210_pllmb_set_defaults(struct tegra_clk_pll *pllmb)
>  		_pll_misc_chk_default(clk_base, pllmb->params, 0, val,
>  				~mask & PLLMB_MISC1_WRITE_MASK);
>
> +		if (!pllmb->params->defaults_set)
> +			pr_warn("PLL_MB already enabled. Postponing set full defaults\n");
>  		/* Enable lock detect */
>  		val = readl_relaxed(clk_base + pllmb->params->ext_misc_reg[0]);
>  		val &= ~mask;
> @@ -1008,13 +1012,14 @@ static void tegra210_pllp_set_defaults(struct tegra_clk_pll *pllp)
>  	pllp->params->defaults_set = true;
>
>  	if (val & PLL_ENABLE) {
> -		pr_warn("PLL_P already enabled. Postponing set full defaults\n");
>
>  		/*
>  		 * PLL is ON: check if defaults already set, then set those
>  		 * that can be updated in flight.
>  		 */
>  		pllp_check_defaults(pllp, true);
> +		if (!pllp->params->defaults_set)
> +			pr_warn("PLL_P already enabled. Postponing set full defaults\n");
>
>  		/* Enable lock detect */
>  		val = readl_relaxed(clk_base + pllp->params->ext_misc_reg[0]);
> @@ -1069,13 +1074,14 @@ static void tegra210_pllu_set_defaults(struct tegra_clk_pll *pllu)
>  	pllu->params->defaults_set = true;
>
>  	if (val & PLL_ENABLE) {
> -		pr_warn("PLL_U already enabled. Postponing set full defaults\n");
>
>  		/*
>  		 * PLL is ON: check if defaults already set, then set those
>  		 * that can be updated in flight.
>  		 */
>  		pllu_check_defaults(pllu, false);
> +		if (!pllu->params->defaults_set)
> +			pr_warn("PLL_U already enabled. Postponing set full defaults\n");
>
>  		/* Enable lock detect */
>  		val = readl_relaxed(clk_base + pllu->params->ext_misc_reg[0]);