Re: [PATCH 6/7] clk: tegra: correct tegra210_pll_fixed_mdiv_cfg rate calculation

[Mikko Perttunen]

Reviewed-by: Mikko Perttunen <mperttunen@xxxxxxxxxx>

On 22.02.2017 17:14, Peter De Schrijver wrote:
> Return the actually achieved rate in cfg->output_rate rather than just the
> requested rate. This is important to make clk_round_rate return the correct
> result.
>
> Signed-off-by: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
> ---
>  drivers/clk/tegra/clk-tegra210.c | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
> index fe698d2..58d7f9c 100644
> --- a/drivers/clk/tegra/clk-tegra210.c
> +++ b/drivers/clk/tegra/clk-tegra210.c
> @@ -1222,6 +1222,7 @@ static int tegra210_pll_fixed_mdiv_cfg(struct clk_hw *hw,
>  	cfg->n = p_rate / cf;
>
>  	cfg->sdm_data = 0;
> +	cfg->output_rate = input_rate;
>  	if (params->sdm_ctrl_reg) {
>  		unsigned long rem = p_rate - cf * cfg->n;
>  		/* If ssc is enabled SDM enabled as well, even for integer n */
> @@ -1232,10 +1233,15 @@ static int tegra210_pll_fixed_mdiv_cfg(struct clk_hw *hw,
>  			s -= PLL_SDM_COEFF / 2;
>  			cfg->sdm_data = sdin_din_to_data(s);
>  		}
> +		cfg->output_rate *= cfg->n * PLL_SDM_COEFF + PLL_SDM_COEFF/2 +
> +					sdin_data_to_din(cfg->sdm_data);
> +		cfg->output_rate /= p * cfg->m * PLL_SDM_COEFF;
> +	} else {
> +		cfg->output_rate *= cfg->n;
> +		cfg->output_rate /= p * cfg->m;
>  	}
>
>  	cfg->input_rate = input_rate;
> -	cfg->output_rate = rate;
>
>  	return 0;
>  }