Re: [PATCH v5 02/11] phy: exynos-ufs: add UFS PHY driver for EXYNOS SoC
From: Kishon Vijay Abraham I
Date: Mon Feb 27 2017 - 00:27:56 EST
Hi,
On Thursday 23 February 2017 12:20 AM, Alim Akhtar wrote:
> On Fri, Feb 3, 2017 at 2:49 PM, Alim Akhtar <alim.akhtar@xxxxxxxxxxx> wrote:
>> Hi Kishon,
>>
>>
>> On 11/19/2015 07:09 PM, Kishon Vijay Abraham I wrote:
>>>
>>> Hi,
>>>
>>> On Tuesday 17 November 2015 01:41 PM, Alim Akhtar wrote:
>>>>
>>>> Hi
>>>> Thanks again for looking into this.
>>>>
>>>> On 11/17/2015 11:46 AM, Kishon Vijay Abraham I wrote:
>>>>>
>>>>> Hi,
>>>>>
>>>>> On Monday 09 November 2015 10:56 AM, Alim Akhtar wrote:
>>>>>>
>>>>>> From: Seungwon Jeon <essuuj@xxxxxxxxx>
>>>>>>
>>>>>> This patch introduces Exynos UFS PHY driver. This driver
>>>>>> supports to deal with phy calibration and power control
>>>>>> according to UFS host driver's behavior.
>>>>>>
>>>>>> Signed-off-by: Seungwon Jeon <essuuj@xxxxxxxxx>
>>>>>> Signed-off-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
>>>>>> Cc: Kishon Vijay Abraham I <kishon@xxxxxx>
>>>>>> ---
>>>>>> drivers/phy/Kconfig | 7 ++
>>>>>> drivers/phy/Makefile | 1 +
>>>>>> drivers/phy/phy-exynos-ufs.c | 241
>>>>>> ++++++++++++++++++++++++++++++++++++
>>>>>> drivers/phy/phy-exynos-ufs.h | 85 +++++++++++++
>>>>>> drivers/phy/phy-exynos7-ufs.h | 89 +++++++++++++
>>>>>> include/linux/phy/phy-exynos-ufs.h | 85 +++++++++++++
>>>>>> 6 files changed, 508 insertions(+)
>>>>>> create mode 100644 drivers/phy/phy-exynos-ufs.c
>>>>>> create mode 100644 drivers/phy/phy-exynos-ufs.h
>>>>>> create mode 100644 drivers/phy/phy-exynos7-ufs.h
>>>>>> create mode 100644 include/linux/phy/phy-exynos-ufs.h
>>>>>>
>>>>>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>>>>>> index 7eb5859dd035..7d38a92e0297 100644
>>>>>> --- a/drivers/phy/Kconfig
>>>>>> +++ b/drivers/phy/Kconfig
>>>>>> @@ -389,4 +389,11 @@ config PHY_CYGNUS_PCIE
>>>>>> Enable this to support the Broadcom Cygnus PCIe PHY.
>>>>>> If unsure, say N.
>>>>>>
>>>>>> +config PHY_EXYNOS_UFS
>>>>>> + tristate "EXYNOS SoC series UFS PHY driver"
>>>>>> + depends on OF && ARCH_EXYNOS || COMPILE_TEST
>>>>>> + select GENERIC_PHY
>>>>>> + help
>>>>>> + Support for UFS PHY on Samsung EXYNOS chipsets.
>>>>>> +
>>>>>> endmenu
>>>>>> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
>>>>>> index 075db1a81aa5..9bec4d1a89e1 100644
>>>>>> --- a/drivers/phy/Makefile
>>>>>> +++ b/drivers/phy/Makefile
>>>>>> @@ -10,6 +10,7 @@ obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) +=
>>>>>> phy-armada375-usb2.o
>>>>>> obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
>>>>>> obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
>>>>>> obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
>>>>>> +obj-$(CONFIG_PHY_EXYNOS_UFS) += phy-exynos-ufs.o
>>>>>> obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o
>>>>>> obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o
>>>>>> obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o
>>>>>> diff --git a/drivers/phy/phy-exynos-ufs.c
>>>>>> b/drivers/phy/phy-exynos-ufs.c
>>>>>> new file mode 100644
>>>>>> index 000000000000..cb1aeaa3d4eb
>>>>>> --- /dev/null
>>>>>> +++ b/drivers/phy/phy-exynos-ufs.c
>>>>>> @@ -0,0 +1,241 @@
>>>>>> +/*
>>>>>> + * UFS PHY driver for Samsung EXYNOS SoC
>>>>>> + *
>>>>>> + * Copyright (C) 2015 Samsung Electronics Co., Ltd.
>>>>>> + * Author: Seungwon Jeon <essuuj@xxxxxxxxx>
>>>>>> + *
>>>>>> + * This program is free software; you can redistribute it and/or
>>>>>> modify
>>>>>> + * it under the terms of the GNU General Public License as published
>>>>>> by
>>>>>> + * the Free Software Foundation; either version 2 of the License, or
>>>>>> + * (at your option) any later version.
>>>>>> + */
>>>>>> +#include <linux/clk.h>
>>>>>> +#include <linux/delay.h>
>>>>>> +#include <linux/err.h>
>>>>>> +#include <linux/io.h>
>>>>>> +#include <linux/iopoll.h>
>>>>>> +#include <linux/mfd/syscon.h>
>>>>>> +#include <linux/module.h>
>>>>>> +#include <linux/of.h>
>>>>>> +#include <linux/phy/phy.h>
>>>>>> +#include <linux/phy/phy-exynos-ufs.h>
>>>>>> +#include <linux/platform_device.h>
>>>>>> +#include <linux/regmap.h>
>>>>>> +
>>>>>> +#include "phy-exynos-ufs.h"
>>>>>> +
>>>>>> +#define for_each_phy_lane(phy, i) \
>>>>>> + for (i = 0; i < (phy)->lane_cnt; i++)
>>>>>> +#define for_each_phy_cfg(cfg) \
>>>>>> + for (; (cfg)->id; (cfg)++)
>>>>>> +
>>>>>> +#define PHY_DEF_LANE_CNT 1
>>>>>> +
>>>>>> +static void exynos_ufs_phy_config(struct exynos_ufs_phy *phy,
>>>>>> + const struct exynos_ufs_phy_cfg *cfg, u8 lane)
>>>>>> +{
>>>>>> + enum {LANE_0, LANE_1}; /* lane index */
>>>>>> +
>>>>>> + switch (lane) {
>>>>>> + case LANE_0:
>>>>>> + writel(cfg->val, (phy)->reg_pma + cfg->off_0);
>>>>>> + break;
>>>>>> + case LANE_1:
>>>>>> + if (cfg->id == PHY_TRSV_BLK)
>>>>>> + writel(cfg->val, (phy)->reg_pma + cfg->off_1);
>>>>>> + break;
>>>>>> + }
>>>>>> +}
>>>>>> +
>>>>>> +static bool match_cfg_to_pwr_mode(u8 desc, u8 required_pwr)
>>>>>> +{
>>>>>> + if (IS_PWR_MODE_ANY(desc))
>>>>>> + return true;
>>>>>> +
>>>>>> + if (IS_PWR_MODE_HS(required_pwr) && IS_PWR_MODE_HS_ANY(desc))
>>>>>> + return true;
>>>>>> +
>>>>>> + if (COMP_PWR_MODE(required_pwr, desc))
>>>>>> + return true;
>>>>>> +
>>>>>> + if (COMP_PWR_MODE_MD(required_pwr, desc) &&
>>>>>> + COMP_PWR_MODE_GEAR(required_pwr, desc) &&
>>>>>> + COMP_PWR_MODE_SER(required_pwr, desc))
>>>>>> + return true;
>>>>>> +
>>>>>> + return false;
>>>>>> +}
>>>>>> +
>>>>>> +int exynos_ufs_phy_calibrate(struct phy *phy,
>>>>>> + enum phy_cfg_tag tag, u8 pwr)
>>>>>
>>>>>
>>>>> This is similar to the first version of your patch without
>>>>> EXPORT_SYMBOL.
>>>>>
>>>>> I think you have to create a new generic PHY_OPS for calibrate PHY while
>>>>> making
>>>>> sure that it is as generic as possible (which means calibrate_phy
>>>>> shouldn't
>>>>> have tag and pwr arguments or a strong justification as to why those
>>>>> arguments
>>>>> are required in a generic API).
>>>>
>>>> I don't see the advantage to making this a generic phy_ops, this is
>>>> exynos
>>>> specific ufs-phy, please have a look at other implementations
>>>
>>>
>>> only the implementation is specific to exynos. I've seen lot of other
>>> vendors
>>> want to do something like calibrate phy.
>>>
>>> So if we add something like (*calibrate)(struct phy *phy), then it can be
>>> used
>>> by others as well. Russell King also want to minimize the code to program
>>> calibration settings. So it would be good to come up with a set of
>>> standard
>>> bindings like 'phy,tx-swing', 'phy,emphasis', 'phy,amplitude' etc.. to
>>> program
>>> these settings.
>>>>
>>>> drivers/phy/phy-qcom-ufs.c (which I belive mereged recently)
>>>
>>>
>>> Thats why I hate when someone else merge PHY drivers :-( That driver can
>>> as
>>> well be in drivers/misc as it doesn't use PHY framework as it is supposed
>>> to be
>>> used. It just exports a dozen of API's to be used by controller drivers.
>>> ick..
>>>
>>>> may be other vendors might come with there own implementation of phy.
>>>
>>>
>>> right, it's all about providing the correct callback functions.
>>>>
>>>> I am using what is currently provided by the generic phy framework.
>>>
>>>
>>> I think for your use case, what is currently provided in the PHY framework
>>> is
>>> not sufficient.
>>>
>> Its little over a year since last time we discuss about adding a generic
>> calibration API. I can see in the past people tried adding *calibration* API
>> [1] but not sure why [1] was not landed in mainline.
>> Anyway now we have many users of phy_calibration API, like UFS, USB and may
>> be PCIe, there is a real need to add this functionality. So, here is my
>> approach:
Agree, there are quite a few users that require calibration of phy parameters.
I think previously it was accommodated in phy_init, hence it was not merged.
>> * Along with [1], we can add a void *priv for handling device specific phy
>> private data, and before calling phy_calibration() from phy consumer,
>> phy->priv is populated with private data.
Not sure how you plan to use priv here?
Thanks
Kishon