Linux 3.2.86
From: Ben Hutchings
Date: Mon Feb 27 2017 - 10:10:23 EST
I'm announcing the release of the 3.2.86 kernel.
All users of the 3.2 kernel series should upgrade.
The updated 3.2.y git tree can be found at:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-3.2.y
and can be browsed at the normal kernel.org git web browser:
https://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git
The diff from 3.2.85 is attached to this message.
Ben.
------------
Makefile | 2 +-
arch/x86/kvm/vmx.c | 11 +++++------
drivers/usb/serial/kl5kusb105.c | 9 +++++----
net/dccp/input.c | 3 ++-
net/ipv4/tcp.c | 6 ++++++
5 files changed, 19 insertions(+), 12 deletions(-)
Andrey Konovalov (1):
dccp: fix freeing skb too early for IPV6_RECVPKTINFO
Ben Hutchings (1):
Linux 3.2.86
Eric Dumazet (1):
tcp: avoid infinite loop in tcp_splice_read()
Jim Mattson (1):
kvm: nVMX: Allow L1 to intercept software exceptions (#BP and #OF)
Johan Hovold (1):
USB: serial: kl5kusb105: fix line-state error handling
diff --git a/Makefile b/Makefile
index 6858bcc57239..d3f775cb0a5a 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
VERSION = 3
PATCHLEVEL = 2
-SUBLEVEL = 85
+SUBLEVEL = 86
EXTRAVERSION =
NAME = Saber-toothed Squirrel
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index bd0ed47989e4..0fb33a013863 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -876,10 +876,10 @@ static inline bool nested_cpu_has_virtual_nmis(struct vmcs12 *vmcs12,
return vmcs12->pin_based_vm_exec_control & PIN_BASED_VIRTUAL_NMIS;
}
-static inline bool is_exception(u32 intr_info)
+static inline bool is_nmi(u32 intr_info)
{
return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VALID_MASK))
- == (INTR_TYPE_HARD_EXCEPTION | INTR_INFO_VALID_MASK);
+ == (INTR_TYPE_NMI_INTR | INTR_INFO_VALID_MASK);
}
static void nested_vmx_vmexit(struct kvm_vcpu *vcpu);
@@ -4225,7 +4225,7 @@ static int handle_exception(struct kvm_vcpu *vcpu)
return 0;
}
- if ((intr_info & INTR_INFO_INTR_TYPE_MASK) == INTR_TYPE_NMI_INTR)
+ if (is_nmi(intr_info))
return 1; /* already handled by vmx_vcpu_run() */
if (is_no_device(intr_info)) {
@@ -5773,7 +5773,7 @@ static bool nested_vmx_exit_handled(struct kvm_vcpu *vcpu)
switch (exit_reason) {
case EXIT_REASON_EXCEPTION_NMI:
- if (!is_exception(intr_info))
+ if (is_nmi(intr_info))
return 0;
else if (is_page_fault(intr_info))
return enable_ept;
@@ -5973,8 +5973,7 @@ static void vmx_complete_atomic_exit(struct vcpu_vmx *vmx)
kvm_machine_check();
/* We need to handle NMIs before interrupts are enabled */
- if ((exit_intr_info & INTR_INFO_INTR_TYPE_MASK) == INTR_TYPE_NMI_INTR &&
- (exit_intr_info & INTR_INFO_VALID_MASK)) {
+ if (is_nmi(exit_intr_info)) {
kvm_before_handle_nmi(&vmx->vcpu);
asm("int $2");
kvm_after_handle_nmi(&vmx->vcpu);
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 19373cb7c5bf..2cf92f1d2847 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -209,10 +209,11 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
status_buf, KLSI_STATUSBUF_LEN,
10000
);
- if (rc < 0)
- dev_err(&port->dev, "Reading line status failed (error = %d)\n",
- rc);
- else {
+ if (rc != KLSI_STATUSBUF_LEN) {
+ dev_err(&port->dev, "reading line status failed: %d\n", rc);
+ if (rc >= 0)
+ rc = -EIO;
+ } else {
status = get_unaligned_le16(status_buf);
dev_info(&port->serial->dev->dev, "read status %x %x",
diff --git a/net/dccp/input.c b/net/dccp/input.c
index 51d5fe5fffba..2305191f32f9 100644
--- a/net/dccp/input.c
+++ b/net/dccp/input.c
@@ -606,7 +606,8 @@ int dccp_rcv_state_process(struct sock *sk, struct sk_buff *skb,
if (inet_csk(sk)->icsk_af_ops->conn_request(sk,
skb) < 0)
return 1;
- goto discard;
+ consume_skb(skb);
+ return 0;
}
if (dh->dccph_type == DCCP_PKT_RESET)
goto discard;
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 9a7c01e5cb8d..80a9a9710726 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -659,6 +659,12 @@ ssize_t tcp_splice_read(struct socket *sock, loff_t *ppos,
ret = -EAGAIN;
break;
}
+ /* if __tcp_splice_read() got nothing while we have
+ * an skb in receive queue, we do not want to loop.
+ * This might happen with URG data.
+ */
+ if (!skb_queue_empty(&sk->sk_receive_queue))
+ break;
sk_wait_data(sk, &timeo);
if (signal_pending(current)) {
ret = sock_intr_errno(timeo);
Attachment:
signature.asc
Description: Digital signature