Re: [PATCH v2 3/3] remoteproc: qcom: Add msm8996 specific changes in mss rproc driver.
From: Stephen Boyd
Date: Mon Feb 27 2017 - 17:55:45 EST
On 01/30, Avaneesh Kumar Dwivedi wrote:
> diff --git a/drivers/remoteproc/qcom_q6v5_pil.c b/drivers/remoteproc/qcom_q6v5_pil.c
> index 35eee68..9c12a36 100644
> --- a/drivers/remoteproc/qcom_q6v5_pil.c
> +++ b/drivers/remoteproc/qcom_q6v5_pil.c
> @@ -485,35 +497,99 @@ static int q6v5_rmb_mba_wait(struct q6v5 *qproc, u32 status, int ms)
>
> static int q6v5proc_reset(struct q6v5 *qproc)
> {
> - u32 val;
> + u64 val;
Why u64? There isn't any readq/writeq usage here.
> int ret;
> + int i;
>
[...]
> + if (qproc->version == MSS_MSM8996) {
> + /* Override the ACC value if required */
> + writel(QDSP6SS_ACC_OVERRIDE_VAL,
> + qproc->reg_base + QDSP6SS_STRAP_ACC);
> +
> + /* Assert resets, stop core */
> + val = readl(qproc->reg_base + QDSP6SS_RESET_REG);
> + val |= (Q6SS_CORE_ARES | Q6SS_BUS_ARES_ENABLE | Q6SS_STOP_CORE);
Useless parenthesis.
> + writel(val, qproc->reg_base + QDSP6SS_RESET_REG);
> +
> + /* BHS require xo cbcr to be enabled */
> + val = readl(qproc->reg_base + QDSP6SS_XO_CBCR);
> + val |= 0x1;
> + writel(val, qproc->reg_base + QDSP6SS_XO_CBCR);
>
> + /* Read CLKOFF bit to go low indicating CLK is enabled */
> + ret = readl_poll_timeout(qproc->reg_base + QDSP6SS_XO_CBCR,
> + val, !(val & BIT(31)), 1, HALT_CHECK_MAX_LOOPS);
> + if (ret) {
> + dev_err(qproc->dev,
> + "xo cbcr enabling timed out (rc:%d)\n", ret);
> + return ret;
> + }
> + /* Enable power block headswitch and wait for it to stabilize */
> + val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
> + val |= QDSP6v56_BHS_ON;
> + writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
> + val |= readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
> + udelay(1);
> +
> + /* Put LDO in bypass mode */
> + val |= QDSP6v56_LDO_BYP;
> + writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
> +
> + /* Deassert QDSP6 compiler memory clamp */
> + val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
> + val &= ~QDSP6v56_CLAMP_QMC_MEM;
> + writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
> +
> + /* Deassert memory peripheral sleep and L2 memory standby */
> + val |= (Q6SS_L2DATA_STBY_N | Q6SS_SLP_RET_N);
Useless parenthesis.
> + writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
> +
> + /* Turn on L1, L2, ETB and JU memories 1 at a time */
> + val = readl(qproc->reg_base + QDSP6SS_MEM_PWR_CTL);
> + for (i = 19; i >= 0; i--) {
> + val |= BIT(i);
> + writel(val, qproc->reg_base +
> + QDSP6SS_MEM_PWR_CTL);
> + /*
> + * Read back value to ensure the write is done then
> + * wait for 1us for both memory peripheral and data
> + * array to turn on.
> + */
> + val |= readl(qproc->reg_base + QDSP6SS_MEM_PWR_CTL);
> + udelay(1);
> + }
> + /* Remove word line clamp */
> + val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
> + val &= ~QDSP6v56_CLAMP_WL;
> + writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
> + } else {
> + /* Assert resets, stop core */
> + val = readl(qproc->reg_base + QDSP6SS_RESET_REG);
> + val |= (Q6SS_CORE_ARES | Q6SS_BUS_ARES_ENABLE | Q6SS_STOP_CORE);
Useless parenthesis.
> + writel(val, qproc->reg_base + QDSP6SS_RESET_REG);
> +
> + /* Enable power block headswitch and wait for it to stabilize */
> + val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
> + val |= QDSS_BHS_ON | QDSS_LDO_BYP;
> + writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
> + val |= readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
> + udelay(1);
> @@ -849,6 +925,7 @@ static int q6v5_stop(struct rproc *rproc)
> {
> struct q6v5 *qproc = (struct q6v5 *)rproc->priv;
> int ret;
> + int val;
u32 instead of int?
>
> qproc->running = false;
>
> @@ -866,6 +943,15 @@ static int q6v5_stop(struct rproc *rproc)
> q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_modem);
> q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
>
> + if (qproc->version == MSS_MSM8996) {
> + /*
> + * To avoid high MX current during LPASS/MSS restart.
> + */
Three lines could be one line comment instead.
> + val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
> + val |= Q6SS_CLAMP_IO | QDSP6v56_CLAMP_WL |
> + QDSP6v56_CLAMP_QMC_MEM;
> + writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
> + }
> reset_control_assert(qproc->mss_restart);
> q6v5_clk_disable(qproc->dev, qproc->active_clks,
> qproc->active_clk_count);
> @@ -1213,6 +1299,47 @@ static int q6v5_remove(struct platform_device *pdev)
> return 0;
> }
>
> +static const struct rproc_hexagon_res msm8996_mss = {
> + .hexagon_mba_image = "mba.mbn",
> + .proxy_supply = (struct qcom_mss_reg_res[]) {
> + {
> + .supply = "vdd_mx",
> + .uV = 6,
> + },
> + {
> + .supply = "vdd_cx",
> + .uV = 7,
> + .uA = 100000,
> + },
vdd cx and vdd mx are corners. The plan is to _not_ use the
regulator framework for those, so treating them like supplies is
incorrect here.
> + {
> + .supply = "vdd_pll",
> + .uV = 1800000,
> + .uA = 100000,
> + },
> + {}
> + },
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project