Re: [PATCH v4 1/4] Documentation: dt-bindings: Document ADXL345 accelerometer binding

From: Rob Herring
Date: Mon Feb 27 2017 - 20:21:21 EST


On Sun, Feb 26, 2017 at 09:45:04PM +0800, Eva Rachel Retuya wrote:
> Add the device tree binding documentation for the ADXL345 3-axis digital
> accelerometer.

Use "dt-bindings: iio: accel: ..." for the subject prefix.

>
> Signed-off-by: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
> ---
> .../devicetree/bindings/iio/accel/adxl345.txt | 38 ++++++++++++++++++++++
> 1 file changed, 38 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/accel/adxl345.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/accel/adxl345.txt b/Documentation/devicetree/bindings/iio/accel/adxl345.txt
> new file mode 100644
> index 0000000..e623f4a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/accel/adxl345.txt
> @@ -0,0 +1,38 @@
> +Analog Devices ADXL345 3-Axis, +/-(2g/4g/8g/16g) Digital Accelerometer
> +
> +http://www.analog.com/en/products/mems/accelerometers/adxl345.html
> +
> +Required properties:
> + - compatible : should be "adi,adxl345"
> + - reg : the I2C address or SPI chip select number of the sensor
> +
> +Required properties for SPI bus usage:
> + - spi-max-frequency : set maximum clock frequency, must be 5000000
> + - spi-cpol and spi-cpha : must be defined for adxl345 to enable SPI mode 3
> +
> +Optional properties:
> + - interrupt-parent : phandle to the parent interrupt controller as documented
> + in Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> + - interrupts: interrupt mapping for IRQ as documented in
> + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> +
> +Example for a I2C device node:
> +
> + adxl345@2a {

accelerometer@2a

> + compatible = "adi,adxl345";
> + reg = <0x53>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> +Example for a SPI device node:
> +
> + adxl345@0 {

Same here.

> + compatible = "adi,adxl345";
> + reg = <0>;
> + spi-max-frequency = <5000000>;
> + spi-cpol;
> + spi-cpha;
> + interrupt-parent = <&gpio1>;
> + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> + };
> --
> 2.7.4
>