[PATCH v4 0/6] ARM: davinci: vpif capture & display support

From: Bartosz Golaszewski
Date: Tue Feb 28 2017 - 12:08:18 EST


This series adds pdata quirks and other changes required to make vpif
work on the da850-evm board.

v1 -> v2:
- added patch 1/5 - don't bail-out from pdata_quirks_check() after
applying a single quirk
- changed the comment above the new fixed regulator to make it more
descriptive
- removed unnecessary #ifdefs from pdata-quirks.c

v2 -> v3:
- added patch 6/6: add enable GPIOs to pdata-quirks - this is needed
because vpif gets its resources from pdata-quirks instead of the
device tree

v3 -> v4:
- removed patch 6/6 - it may take some more time to determine the
correct solution for enable-gpios, so I decided to respin the
series without it and send it later as a follow-up
- split the pdata-quirks patch for vpif capture into two separate
patches: one adding the OF_DEV_AUXDATA() and one adding the actual
quirks
- split the vpif capture registration into two functions to avoid
redundant ifs

Bartosz Golaszewski (3):
ARM: davinci: da8xx: allow having multiple pdata-quirks
ARM: da850-evm: add a fixed regulator for the UI board IO expander
ARM: davinci: add pdata-quirks for da850-evm vpif display

Kevin Hilman (3):
ARM: davinci: board-da850-evm: add I2C ID for VPIF
ARM: davinci: da8xx: add OF_DEV_AUXDATA() for vpif
ARM: davinci: da8xx: add pdata-quirks for VPIF capture

arch/arm/mach-davinci/board-da850-evm.c | 4 +
arch/arm/mach-davinci/da8xx-dt.c | 1 +
arch/arm/mach-davinci/pdata-quirks.c | 178 +++++++++++++++++++++++++++++++-
3 files changed, 182 insertions(+), 1 deletion(-)

--
2.9.3