Re: [linux-sunxi] [PATCH 5/5] pinctrl: sunxi: Add A64 R_PIO controller support
From: Chen-Yu Tsai
Date: Tue Feb 28 2017 - 21:37:54 EST
On Wed, Mar 1, 2017 at 2:29 AM, Andre Przywara <andre.przywara@xxxxxxx> wrote:
> Hi,
>
> On 28/02/17 17:24, Icenowy Zheng wrote:
>> The A64 has a R_PIO pin controller, similar to the one found on the H3 SoC.
>> Add support for the pins controlled by the R_PIO controller.
>>
>> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxxx>
>> ---
>> drivers/pinctrl/sunxi/Kconfig | 5 +
>> drivers/pinctrl/sunxi/Makefile | 1 +
>> drivers/pinctrl/sunxi/pinctrl-sun50i-a64-r.c | 143 +++++++++++++++++++++++++++
>> 3 files changed, 149 insertions(+)
>> create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun50i-a64-r.c
>>
>> diff --git a/drivers/pinctrl/sunxi/Kconfig b/drivers/pinctrl/sunxi/Kconfig
>> index 92325736d953..0738b0df5a0b 100644
>> --- a/drivers/pinctrl/sunxi/Kconfig
>> +++ b/drivers/pinctrl/sunxi/Kconfig
>> @@ -69,6 +69,11 @@ config PINCTRL_SUN50I_A64
>> def_bool ARM64 && ARCH_SUNXI
>> select PINCTRL_SUNXI
>>
>> +config PINCTRL_SUN50I_A64_R
>> + def_bool ARM64 && ARCH_SUNXI
>> + depends on RESET_CONTROLLER
>
> Same comment as on patch 1/5 (select instead of "depends on").
> I take it this for drivers/reset/reset-sunxi.c?
> Shouldn't this be the sunxi specific CONFIG_RESET_SUNXI then?
> Also from from having a quick look at the driver this is broken for
> arm64 (BITS_PER_LONG usage).
> From having a closer look this driver is actually not Allwinner specific
> at all, since it just describes a number of bits in consecutive
> 32-bit(!) registers as reset cells.
> As I today stumbled upon another SoC which has the same reset register
> layout I was wondering if it's worth to generalise this? Possibly
> renaming the driver, and allowing additional compatibles?
> I can take a stab at this.
CONFIG_RESET_SUNXI enables the old (pre-sunxi-ng) reset controller driver.
This driver was never used for ARM64 sunxi. As for it being generic,
I guess it's pretty standard, as it's just a bunch of registers with each
bit assigned to some peripheral.
CONFIG_RESET enables the reset control subsystem, which we need. This
is enabled by default if the platform selects ARCH_HAS_RESET_CONTROLLER,
which we do.
Regards
ChenYu
> Cheers,
> Andre.
>
>> + select PINCTRL_SUNXI
>> +
>> config PINCTRL_SUN50I_H5
>> def_bool ARM64 && ARCH_SUNXI
>> select PINCTRL_SUNXI
>> diff --git a/drivers/pinctrl/sunxi/Makefile b/drivers/pinctrl/sunxi/Makefile
>> index 04ccb88ebd5f..df4ccd6cd44c 100644
>> --- a/drivers/pinctrl/sunxi/Makefile
>> +++ b/drivers/pinctrl/sunxi/Makefile
>> @@ -11,6 +11,7 @@ obj-$(CONFIG_PINCTRL_SUN8I_A23) += pinctrl-sun8i-a23.o
>> obj-$(CONFIG_PINCTRL_SUN8I_A23_R) += pinctrl-sun8i-a23-r.o
>> obj-$(CONFIG_PINCTRL_SUN8I_A33) += pinctrl-sun8i-a33.o
>> obj-$(CONFIG_PINCTRL_SUN50I_A64) += pinctrl-sun50i-a64.o
>> +obj-$(CONFIG_PINCTRL_SUN50I_A64_R) += pinctrl-sun50i-a64-r.o
>> obj-$(CONFIG_PINCTRL_SUN8I_A83T) += pinctrl-sun8i-a83t.o
>> obj-$(CONFIG_PINCTRL_SUN8I_H3) += pinctrl-sun8i-h3.o
>> obj-$(CONFIG_PINCTRL_SUN8I_H3_R) += pinctrl-sun8i-h3-r.o
>> diff --git a/drivers/pinctrl/sunxi/pinctrl-sun50i-a64-r.c b/drivers/pinctrl/sunxi/pinctrl-sun50i-a64-r.c
>> new file mode 100644
>> index 000000000000..90996a63689b
>> --- /dev/null
>> +++ b/drivers/pinctrl/sunxi/pinctrl-sun50i-a64-r.c
>> @@ -0,0 +1,143 @@
>> +/*
>> + * Allwinner A64 SoCs special pins pinctrl driver.
>> + *
>> + * Based on pinctrl-sun8i-a23-r.c
>> + *
>> + * Copyright (C) 2016 Icenowy Zheng
>> + * Icenowy Zheng <icenowy@xxxxxxxx>
>> + *
>> + * Copyright (C) 2014 Chen-Yu Tsai
>> + * Chen-Yu Tsai <wens@xxxxxxxx>
>> + *
>> + * Copyright (C) 2014 Boris Brezillon
>> + * Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
>> + *
>> + * Copyright (C) 2014 Maxime Ripard
>> + * Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
>> + *
>> + * This file is licensed under the terms of the GNU General Public
>> + * License version 2. This program is licensed "as is" without any
>> + * warranty of any kind, whether express or implied.
>> + */
>> +
>> +#include <linux/of.h>
>> +#include <linux/of_device.h>
>> +#include <linux/pinctrl/pinctrl.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/reset.h>
>> +
>> +#include "pinctrl-sunxi.h"
>> +
>> +static const struct sunxi_desc_pin sun50i_a64_r_pins[] = {
>> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 0),
>> + SUNXI_FUNCTION(0x0, "gpio_in"),
>> + SUNXI_FUNCTION(0x1, "gpio_out"),
>> + SUNXI_FUNCTION(0x2, "s_rsb"), /* SCK */
>> + SUNXI_FUNCTION(0x3, "s_i2c"), /* SCK */
>> + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 0)), /* PL_EINT0 */
>> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 1),
>> + SUNXI_FUNCTION(0x0, "gpio_in"),
>> + SUNXI_FUNCTION(0x1, "gpio_out"),
>> + SUNXI_FUNCTION(0x2, "s_rsb"), /* SDA */
>> + SUNXI_FUNCTION(0x3, "s_i2c"), /* SDA */
>> + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 1)), /* PL_EINT1 */
>> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 2),
>> + SUNXI_FUNCTION(0x0, "gpio_in"),
>> + SUNXI_FUNCTION(0x1, "gpio_out"),
>> + SUNXI_FUNCTION(0x2, "s_uart"), /* TX */
>> + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 2)), /* PL_EINT2 */
>> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 3),
>> + SUNXI_FUNCTION(0x0, "gpio_in"),
>> + SUNXI_FUNCTION(0x1, "gpio_out"),
>> + SUNXI_FUNCTION(0x2, "s_uart"), /* RX */
>> + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 3)), /* PL_EINT3 */
>> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 4),
>> + SUNXI_FUNCTION(0x0, "gpio_in"),
>> + SUNXI_FUNCTION(0x1, "gpio_out"),
>> + SUNXI_FUNCTION(0x3, "s_jtag"), /* MS */
>> + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 4)), /* PL_EINT4 */
>> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 5),
>> + SUNXI_FUNCTION(0x0, "gpio_in"),
>> + SUNXI_FUNCTION(0x1, "gpio_out"),
>> + SUNXI_FUNCTION(0x3, "s_jtag"), /* CK */
>> + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 5)), /* PL_EINT5 */
>> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 6),
>> + SUNXI_FUNCTION(0x0, "gpio_in"),
>> + SUNXI_FUNCTION(0x1, "gpio_out"),
>> + SUNXI_FUNCTION(0x3, "s_jtag"), /* DO */
>> + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 6)), /* PL_EINT6 */
>> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 7),
>> + SUNXI_FUNCTION(0x0, "gpio_in"),
>> + SUNXI_FUNCTION(0x1, "gpio_out"),
>> + SUNXI_FUNCTION(0x3, "s_jtag"), /* DI */
>> + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 7)), /* PL_EINT7 */
>> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 8),
>> + SUNXI_FUNCTION(0x0, "gpio_in"),
>> + SUNXI_FUNCTION(0x1, "gpio_out"),
>> + SUNXI_FUNCTION(0x2, "s_i2c"), /* SCK */
>> + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 8)), /* PL_EINT8 */
>> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 9),
>> + SUNXI_FUNCTION(0x0, "gpio_in"),
>> + SUNXI_FUNCTION(0x1, "gpio_out"),
>> + SUNXI_FUNCTION(0x2, "s_i2c"), /* SDA */
>> + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 9)), /* PL_EINT9 */
>> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 10),
>> + SUNXI_FUNCTION(0x0, "gpio_in"),
>> + SUNXI_FUNCTION(0x1, "gpio_out"),
>> + SUNXI_FUNCTION(0x2, "s_pwm"),
>> + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 10)), /* PL_EINT10 */
>> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 11),
>> + SUNXI_FUNCTION(0x0, "gpio_in"),
>> + SUNXI_FUNCTION(0x1, "gpio_out"),
>> + SUNXI_FUNCTION(0x2, "s_cir_rx"),
>> + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 11)), /* PL_EINT11 */
>> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 12),
>> + SUNXI_FUNCTION(0x0, "gpio_in"),
>> + SUNXI_FUNCTION(0x1, "gpio_out"),
>> + SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 12)), /* PL_EINT12 */
>> +};
>> +
>> +static const struct sunxi_pinctrl_desc sun50i_a64_r_pinctrl_data = {
>> + .pins = sun50i_a64_r_pins,
>> + .npins = ARRAY_SIZE(sun50i_a64_r_pins),
>> + .pin_base = PL_BASE,
>> + .irq_banks = 1,
>> +};
>> +
>> +static int sun50i_a64_r_pinctrl_probe(struct platform_device *pdev)
>> +{
>> + struct reset_control *rstc;
>> + int ret;
>> +
>> + rstc = devm_reset_control_get(&pdev->dev, NULL);
>> + if (IS_ERR(rstc)) {
>> + dev_err(&pdev->dev, "Reset controller missing\n");
>> + return PTR_ERR(rstc);
>> + }
>> +
>> + ret = reset_control_deassert(rstc);
>> + if (ret)
>> + return ret;
>> +
>> + ret = sunxi_pinctrl_init(pdev,
>> + &sun50i_a64_r_pinctrl_data);
>> +
>> + if (ret)
>> + reset_control_assert(rstc);
>> +
>> + return ret;
>> +}
>> +
>> +static const struct of_device_id sun50i_a64_r_pinctrl_match[] = {
>> + { .compatible = "allwinner,sun50i-a64-r-pinctrl", },
>> + {}
>> +};
>> +
>> +static struct platform_driver sun50i_a64_r_pinctrl_driver = {
>> + .probe = sun50i_a64_r_pinctrl_probe,
>> + .driver = {
>> + .name = "sun50i-a64-r-pinctrl",
>> + .of_match_table = sun50i_a64_r_pinctrl_match,
>> + },
>> +};
>> +builtin_platform_driver(sun50i_a64_r_pinctrl_driver);
>>