Re: [PATCH v2 2/2] drm: bridge: Move HPD handling to PHY operations

[Laurent Pinchart]

Hi Neil,

Thank you for the patch.

On Thursday 02 Mar 2017 16:29:32 Neil Armstrong wrote:
> The HDMI TX controller support HPD and RXSENSE signaling from the PHY
> via it's STAT0 PHY interface, but some vendor PHYs can manage these
> signals independently from the controller, thus these STAT0 handling
> should be moved to PHY specific operations and become optional.
> 
> The existing STAT0 HPD and RXSENSE handling code is refactored into
> a supplementaty set of default PHY operations that are used automatically
> when the platform glue doesn't provide its own operations.
> 
> Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/bridge/dw-hdmi.c | 134 +++++++++++++++++++++++++-----------
>  include/drm/bridge/dw_hdmi.h     |   8 +++
>  2 files changed, 104 insertions(+), 38 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/dw-hdmi.c
> b/drivers/gpu/drm/bridge/dw-hdmi.c index 653ecd7..58dcf7d 100644
> --- a/drivers/gpu/drm/bridge/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/dw-hdmi.c
> @@ -1098,10 +1098,50 @@ static enum drm_connector_status
> dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi, connector_status_connected :
> connector_status_disconnected;
>  }
> 
> +static void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
> +				   bool force, bool disabled, bool rxsense)
> +{
> +	if (force || disabled || !rxsense)
> +		hdmi->phy_mask |= HDMI_PHY_RX_SENSE;
> +	else
> +		hdmi->phy_mask &= ~HDMI_PHY_RX_SENSE;
> +}
> +
> +static void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data)
> +{
> +	/* setup HPD and RXSENSE interrupt polarity */
> +	hdmi_writeb(hdmi, HDMI_PHY_HPD | HDMI_PHY_RX_SENSE, HDMI_PHY_POL0);
> +}
> +
> +static void dw_hdmi_phy_configure_hpd(struct dw_hdmi *hdmi, void *data)
> +{
> +	/* enable cable hot plug irq */
> +	hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
> +}
> +
> +static void dw_hdmi_phy_clear_hpd(struct dw_hdmi *hdmi, void *data)
> +{
> +	/* Clear Hotplug interrupts */
> +	hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE,
> +		    HDMI_IH_PHY_STAT0);
> +}
> +
> +static void dw_hdmi_phy_unmute_hpd(struct dw_hdmi *hdmi, void *data)
> +{
> +	/* Unmute Hotplug interrupts */
> +	hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD | 
HDMI_IH_PHY_STAT0_RX_SENSE),
> +		    HDMI_IH_MUTE_PHY_STAT0);
> +}

Do we really need all those new operations ? It looks to me like a bit of 
refactoring could help lowering the number of operations. We essentially need

- an init function called at probe time (or likely rather at runtime PM resume 
time when we'll implement runtime PM) 

- an interrupt enable/disable function roughly equivalent to 
dw_hdmi_update_phy_mask()

- a read function to report the detection results called from 
dw_hdmi_connector_detect()

>  static const struct dw_hdmi_phy_ops dw_hdmi_synopsys_phy_ops = {
>  	.init = dw_hdmi_phy_init,
>  	.disable = dw_hdmi_phy_disable,
>  	.read_hpd = dw_hdmi_phy_read_hpd,
> +	.update_hpd = dw_hdmi_phy_update_hpd,
> +	.setup_hpd = dw_hdmi_phy_setup_hpd,
> +	.configure_hpd = dw_hdmi_phy_configure_hpd,
> +	.clear_hpd = dw_hdmi_phy_clear_hpd,
> +	.unmute_hpd = dw_hdmi_phy_unmute_hpd,
>  };
> 
>  /* ------------------------------------------------------------------------
> @@ -1507,11 +1547,12 @@ static int dw_hdmi_fb_registered(struct dw_hdmi
> *hdmi) HDMI_PHY_I2CM_CTLINT_ADDR);
> 
>  	/* enable cable hot plug irq */
> -	hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
> +	if (hdmi->phy.ops->configure_hpd)
> +		hdmi->phy.ops->configure_hpd(hdmi, hdmi->phy.data);
> 
>  	/* Clear Hotplug interrupts */
> -	hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE,
> -		    HDMI_IH_PHY_STAT0);
> +	if (hdmi->phy.ops->clear_hpd)
> +		hdmi->phy.ops->clear_hpd(hdmi, hdmi->phy.data);

The probe function contains the same code. Let's inline this function into 
probe, group all HPD-related initialization together and extract that into a 
function to keep probe easy to read. I think you can do that in a separate 
patch.

>  	return 0;
>  }
> @@ -1622,13 +1663,14 @@ static void dw_hdmi_update_phy_mask(struct dw_hdmi
> *hdmi) {
>  	u8 old_mask = hdmi->phy_mask;
>
> -	if (hdmi->force || hdmi->disabled || !hdmi->rxsense)
> -		hdmi->phy_mask |= HDMI_PHY_RX_SENSE;
> -	else
> -		hdmi->phy_mask &= ~HDMI_PHY_RX_SENSE;
> +	if (hdmi->phy.ops->update_hpd)
> +		hdmi->phy.ops->update_hpd(hdmi, hdmi->phy.data,
> +					  hdmi->force, hdmi->disabled,
> +					  hdmi->rxsense);
> 
> -	if (old_mask != hdmi->phy_mask)
> -		hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
> +	if (old_mask != hdmi->phy_mask &&

phy_mask isn't accessible to glue code, so this test will never be true with 
vendor PHYs.

> +	    hdmi->phy.ops->configure_hpd)
> +		hdmi->phy.ops->configure_hpd(hdmi, hdmi->phy.data);
>  }
> 
>  static enum drm_connector_status
> @@ -1820,6 +1862,41 @@ static irqreturn_t dw_hdmi_hardirq(int irq, void
> *dev_id) return ret;
>  }
> 
> +void __dw_hdmi_setup_rx_sense(struct dw_hdmi *hdmi, bool hpd, bool
> rx_sense)
> +{
> +	mutex_lock(&hdmi->mutex);
> +
> +	if (!hdmi->disabled && !hdmi->force) {
> +		/*
> +		 * If the RX sense status indicates we're disconnected,
> +		 * clear the software rxsense status.
> +		 */
> +		if (!rx_sense)
> +			hdmi->rxsense = false;
> +
> +		/*
> +		 * Only set the software rxsense status when both
> +		 * rxsense and hpd indicates we're connected.
> +		 * This avoids what seems to be bad behaviour in
> +		 * at least iMX6S versions of the phy.
> +		 */
> +		if (hpd)
> +			hdmi->rxsense = true;

This contradicts the above comment, hdmi->rxsense is set back to true solely 
based on the hpd parameter.

> +
> +		dw_hdmi_update_power(hdmi);
> +		dw_hdmi_update_phy_mask(hdmi);
> +	}

I'd add a blank line here.

> +	mutex_unlock(&hdmi->mutex);
> +}
> +
> +void dw_hdmi_setup_rx_sense(struct device *dev, bool hpd, bool rx_sense)
> +{
> +	struct dw_hdmi *hdmi = dev_get_drvdata(dev);
> +
> +	__dw_hdmi_setup_rx_sense(hdmi, hpd, rx_sense);
> +}
> +EXPORT_SYMBOL_GPL(dw_hdmi_setup_rx_sense);
> +
>  static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
>  {
>  	struct dw_hdmi *hdmi = dev_id;
> @@ -1852,30 +1929,10 @@ static irqreturn_t dw_hdmi_irq(int irq, void
> *dev_id) * ask the source to re-read the EDID.
>  	 */
>  	if (intr_stat &
> -	    (HDMI_IH_PHY_STAT0_RX_SENSE | HDMI_IH_PHY_STAT0_HPD)) {
> -		mutex_lock(&hdmi->mutex);
> -		if (!hdmi->disabled && !hdmi->force) {
> -			/*
> -			 * If the RX sense status indicates we're 
disconnected,
> -			 * clear the software rxsense status.
> -			 */
> -			if (!(phy_stat & HDMI_PHY_RX_SENSE))
> -				hdmi->rxsense = false;
> -
> -			/*
> -			 * Only set the software rxsense status when both
> -			 * rxsense and hpd indicates we're connected.
> -			 * This avoids what seems to be bad behaviour in
> -			 * at least iMX6S versions of the phy.
> -			 */
> -			if (phy_stat & HDMI_PHY_HPD)
> -				hdmi->rxsense = true;
> -
> -			dw_hdmi_update_power(hdmi);
> -			dw_hdmi_update_phy_mask(hdmi);
> -		}
> -		mutex_unlock(&hdmi->mutex);
> -	}
> +	    (HDMI_IH_PHY_STAT0_RX_SENSE | HDMI_IH_PHY_STAT0_HPD))

Is this right ? If your SoC implements a custom HPD mechanism, does it still 
rely on the standard RX SENSE and HPD interrupts ? In particular, this 
function still writes the HDMI_IH_MUTE_PHY_STAT0 register directly, while 
you've extracted a write to the same register in the probe function into a PHY 
operation.

> +		__dw_hdmi_setup_rx_sense(hdmi,
> +					 phy_stat & HDMI_PHY_HPD,
> +					 phy_stat & HDMI_PHY_RX_SENSE);
> 
>  	if (intr_stat & HDMI_IH_PHY_STAT0_HPD) {
>  		dev_dbg(hdmi->dev, "EVENT=%s\n",
> @@ -2146,11 +2203,12 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
>  	 * Configure registers related to HDMI interrupt
>  	 * generation before registering IRQ.
>  	 */
> -	hdmi_writeb(hdmi, HDMI_PHY_HPD | HDMI_PHY_RX_SENSE, HDMI_PHY_POL0);
> +	if (hdmi->phy.ops->setup_hpd)
> +		hdmi->phy.ops->setup_hpd(hdmi, hdmi->phy.data);
> 
>  	/* Clear Hotplug interrupts */
> -	hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE,
> -		    HDMI_IH_PHY_STAT0);
> +	if (hdmi->phy.ops->clear_hpd)
> +		hdmi->phy.ops->clear_hpd(hdmi, hdmi->phy.data);
> 
>  	hdmi->bridge.driver_private = hdmi;
>  	hdmi->bridge.funcs = &dw_hdmi_bridge_funcs;
> @@ -2163,8 +2221,8 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
>  		goto err_iahb;
> 
>  	/* Unmute interrupts */
> -	hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD | 
HDMI_IH_PHY_STAT0_RX_SENSE),
> -		    HDMI_IH_MUTE_PHY_STAT0);
> +	if (hdmi->phy.ops->unmute_hpd)
> +		hdmi->phy.ops->unmute_hpd(hdmi, hdmi->phy.data);
> 
>  	memset(&pdevinfo, 0, sizeof(pdevinfo));
>  	pdevinfo.parent = dev;
> diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
> index 8c0cc13..d72403f 100644
> --- a/include/drm/bridge/dw_hdmi.h
> +++ b/include/drm/bridge/dw_hdmi.h
> @@ -64,6 +64,12 @@ struct dw_hdmi_phy_ops {
>  		    struct drm_display_mode *mode);
>  	void (*disable)(struct dw_hdmi *hdmi, void *data);
>  	enum drm_connector_status (*read_hpd)(struct dw_hdmi *hdmi, void 
*data);
> +	void (*update_hpd)(struct dw_hdmi *hdmi, void *data,
> +			   bool force, bool disabled, bool rxsense);
> +	void (*setup_hpd)(struct dw_hdmi *hdmi, void *data);
> +	void (*configure_hpd)(struct dw_hdmi *hdmi, void *data);
> +	void (*clear_hpd)(struct dw_hdmi *hdmi, void *data);
> +	void (*unmute_hpd)(struct dw_hdmi *hdmi, void *data);

That's quite a lot of new operations. I think we need documentation :-)

>  };
> 
>  struct dw_hdmi_plat_data {
> @@ -93,6 +99,8 @@ int dw_hdmi_probe(struct platform_device *pdev,
>  int dw_hdmi_bind(struct platform_device *pdev, struct drm_encoder *encoder,
> const struct dw_hdmi_plat_data *plat_data);
> 
> +void dw_hdmi_setup_rx_sense(struct device *dev, bool hpd, bool rx_sense);
> +
>  void dw_hdmi_set_sample_rate(struct dw_hdmi *hdmi, unsigned int rate);
>  void dw_hdmi_audio_enable(struct dw_hdmi *hdmi);
>  void dw_hdmi_audio_disable(struct dw_hdmi *hdmi);

-- 
Regards,

Laurent Pinchart