[PATCH] dt-bindings: display: rk3288-mipi-dsi: add reset property
From: John Keeping
Date: Fri Mar 03 2017 - 06:58:42 EST
This reset is required in order to fully reset the internal state of the
MIPI controller.
Signed-off-by: John Keeping <john@xxxxxxxxxxxx>
---
On Thu, 2 Mar 2017 13:56:46 -0800, Brian Norris wrote:
> On Fri, Feb 24, 2017 at 12:55:06PM +0000, John Keeping wrote:
> > + /*
> > + * Note that the reset was not defined in the initial device tree, so
> > + * we have to be prepared for it not being found.
> > + */
> > + apb_rst = devm_reset_control_get(dev, "apb");
>
> Did this reset ever get documented in the device tree bindings? I
> couldn't find it. Perhaps a follow-up patch is in order?
Here's a patch to do that.
.../devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
index 1753f0cc6fad..28d0b437d3cd 100644
--- a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
+++ b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
@@ -13,8 +13,13 @@ Required properties:
- ports: contain a port node with endpoint definitions as defined in [2].
For vopb,set the reg = <0> and set the reg = <1> for vopl.
+Optional properties:
+- resets: list of phandle + reset specifier pairs, as described in [3].
+- reset-names: string reset name, must be "apb".
+
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Documentation/devicetree/bindings/media/video-interfaces.txt
+[3] Documentation/devicetree/bindings/reset/reset.txt
Example:
mipi_dsi: mipi@ff960000 {
@@ -25,6 +30,8 @@ Example:
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
clock-names = "ref", "pclk";
+ resets = <&cru SRST_MIPIDSI0>;
+ reset-names = "apb";
rockchip,grf = <&grf>;
status = "okay";
--
2.12.0.rc2.230.ga28edc07cd.dirty