[PATCH] clk: imx: clk-imxul: The i.mx6ul has no aips_tx3 clock

From: Robin van der Gracht
Date: Fri Mar 03 2017 - 08:58:35 EST


The clock was mapped on CG15 (gpio2_clocks) in the CCRG0 register.

Signed-off-by: Robin van der Gracht <robin@xxxxxxxxxxx>
---
drivers/clk/imx/clk-imx6ul.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c
index 75c35fb..dbd6e59 100644
--- a/drivers/clk/imx/clk-imx6ul.c
+++ b/drivers/clk/imx/clk-imx6ul.c
@@ -73,7 +73,7 @@ static struct clk *clks[IMX6UL_CLK_END];
static struct clk_onecell_data clk_data;

static int const clks_init_on[] __initconst = {
- IMX6UL_CLK_AIPSTZ1, IMX6UL_CLK_AIPSTZ2, IMX6UL_CLK_AIPSTZ3,
+ IMX6UL_CLK_AIPSTZ1, IMX6UL_CLK_AIPSTZ2,
IMX6UL_CLK_AXI, IMX6UL_CLK_ARM, IMX6UL_CLK_ROM,
IMX6UL_CLK_MMDC_P0_FAST, IMX6UL_CLK_MMDC_P0_IPG,
};
@@ -341,9 +341,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
clks[IMX6UL_CLK_GPT2_SERIAL] = imx_clk_gate2("gpt2_serial", "perclk", base + 0x68, 26);
clks[IMX6UL_CLK_UART2_IPG] = imx_clk_gate2("uart2_ipg", "ipg", base + 0x68, 28);
clks[IMX6UL_CLK_UART2_SERIAL] = imx_clk_gate2("uart2_serial", "uart_podf", base + 0x68, 28);
- if (clk_on_imx6ul())
- clks[IMX6UL_CLK_AIPSTZ3] = imx_clk_gate2("aips_tz3", "ahb", base + 0x68, 30);
- else if (clk_on_imx6ull())
+ if (clk_on_imx6ull())
clks[IMX6UL_CLK_AIPSTZ3] = imx_clk_gate2("aips_tz3", "ahb", base + 0x80, 18);

/* CCGR1 */
@@ -482,6 +480,9 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clks[clks_init_on[i]]);

+ if (clk_on_imx6ull())
+ clk_prepare_enable(clks[IMX6UL_CLK_AIPSTZ3]);
+
if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
clk_prepare_enable(clks[IMX6UL_CLK_USBPHY1_GATE]);
clk_prepare_enable(clks[IMX6UL_CLK_USBPHY2_GATE]);
--
2.9.3