[PATCH 3/4] Documentation: dt: Add bindings documentation for CSI-2 Host Video Platform

[Ramiro Oliveira]

Create device tree bindings documentation for the CSI-2 Host Video
 platform.

Signed-off-by: Ramiro Oliveira <roliveir@xxxxxxxxxxxx>
---
 .../devicetree/bindings/media/snps,plat-csi2.txt   | 77 ++++++++++++++++++++++
 1 file changed, 77 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/snps,plat-csi2.txt

diff --git a/Documentation/devicetree/bindings/media/snps,plat-csi2.txt b/Documentation/devicetree/bindings/media/snps,plat-csi2.txt
new file mode 100644
index 000000000000..f559257a0a44
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/snps,plat-csi2.txt
@@ -0,0 +1,77 @@
+Synopsys DesignWare CSI-2 Host Video Platform
+
+The Synopsys DesignWare CSI-2 Host Video Device subsystem comprises of multiple
+sub-devices represented by separate device tree nodes. Currently this includes:
+plat-csi2, video-device, and dw-mipi-csi.
+
+The sub-subdevices are defined as child nodes of the common 'camera'.
+
+Common 'camera' node
+--------------------
+
+Required properties:
+
+- compatible: must be "snps,plat-csi2", "simple-bus"
+
+The 'camera' node must include at least one 'video-device' and one 'dw-mipi-csi'
+child node.
+
+'video-device' device nodes
+-------------------
+
+Required properties:
+
+- compatible: "snps,video-device"
+- dmas, dma-names: List of one DMA specifier and identifier string (as defined
+  in Documentation/devicetree/bindings/dma/dma.txt) per port. Each port
+  requires a DMA channel with the identifier string set to "vdma" followed by
+  the port index.
+
+Image sensor nodes
+------------------
+
+The sensor device nodes should be added to their control bus controller (e.g.
+I2C0) nodes and linked to a port node in the dw-mipi-csi,using the common video
+interfaces bindings, defined in video-interfaces.txt.
+
+Example:
+
+
+	camera {
+		compatible = "snps,plat-csi2", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+			video_device: video-device@0x10000 {
+				compatible = "snps,video-device";
+				dmas = <&axi_vdma_0 0>;
+				dma-names = "vdma0";
+			};
+
+			csi2:	csi2@0x03000 {
+				compatible = "snps,dw-mipi-csi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = < 0x03000 0x7FF>;
+				interrupts = <2>;
+				phys = <&mipi_phy_ctrl1 0>;
+				resets = <&csi2_rst 1>;
+
+				output-type = <2>;
+				ipi-mode = <0>;
+				ipi-color-mode = <0>;
+				ipi-auto-flush = <1>;
+				virtual-channel = <0>;
+
+				port@1 {
+					reg = <1>;
+					csi1_ep1: endpoint {
+						remote-endpoint = <&camera>;
+						data-lanes = <1 2>;
+					};
+				};
+			};
+		};
+	};
+
+The dw-mipi-csi device binding is defined in snps,dw-mipi-csi.txt.
-- 
2.11.0