[PATCH] usb: host: xhci-plat: Fix timeout on removal of hot pluggable xhci controllers

[Guenter Roeck]

Upstream commit 98d74f9ceaef ("xhci: fix 10 second timeout on removal of
PCI hotpluggable xhci controllers") fixes a problem with hot pluggable PCI
xhci controllers which can result in excessive timeouts, to the point where
the system reports a deadlock.

The same problem is seen with hot pluggable xhci controllers using the
xhci-plat driver, such as the driver used for Type-C ports on rk3399.
Similar to hot-pluggable PCI controllers, the driver for this chip
removes the xhci controller from the system when the Type-C cable is
disconnected.

The solution for PCI devices works just as well for non-PCI devices
and avoids the problem.

Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
 drivers/usb/host/xhci-plat.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 6d33b42ffcf5..bd02a6cd8e2c 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -286,6 +286,8 @@ static int xhci_plat_remove(struct platform_device *dev)
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
 	struct clk *clk = xhci->clk;
 
+	xhci->xhc_state |= XHCI_STATE_REMOVING;
+
 	usb_remove_hcd(xhci->shared_hcd);
 	usb_phy_shutdown(hcd->usb_phy);
 
-- 
2.7.4