[PATCH v6] NTB: Add IDT 89HPESxNTx PCIe-switches support

From: Serge Semin
Date: Wed Mar 08 2017 - 15:29:09 EST

Next message: Steven Rostedt: "[PATCH RT 2/7] x86/mm/cpa: avoid wbinvd() for PREEMPT"
Previous message: Hon Ching(Vicky) Lo: "Re: [tpmdd-devel] [PATCH] vTPM: Fix missing NULL check"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

IDT 89HPESxNTx device series is PCIe-switches, which support
Non-Transparent bridging between domains connected to the device ports.
Since new NTB API exposes multi-port interface and messaging API, the
IDT NT-functions can be now supported in the kernel. This driver adds
the following functionality:
1) Multi-port NTB API to have information of possible NT-functions
activated in compliance with available device ports.
2) Memory windows of direct and look up table based address translation
with all possible combinations of BARs setup.
3) Traditional doorbell NTB API.
4) One-on-one messaging NTB API.

There are some IDT PCIe-switch setups, which must be done before any of
the NTB peers started. It can be performed either by system BIOS via
IDT SMBus-slave interface or by pre-initialized IDT PCIe-switch EEPROM:
1) NT-functions of corresponding ports must be activated using
SWPARTxCTL and SWPORTxCTL registers.
2) BAR0 must be configured to expose NT-function configuration
registers map.
3) The rest of the BARs must have at least one memory window
configured, otherwise the driver will just return an error.
Temperature sensor of IDT PCIe-switches can be also optionally
activated by BIOS or EEPROM.
(See IDT documentations for details of how the pre-initialization can
be done)

Signed-off-by: Serge Semin <fancer.lancer@xxxxxxxxx>
Acked-by: Allen Hubbe <Allen.Hubbe@xxxxxxxx>
---

Changelog v2:
- Fix minor checkpatch.pl issues
- Get rid of obfuscating macros

Changelog v3:
- No write to registers if address is either out of bound or unaligned
- Fix idt_reg_set_bits()/idt_reg_clear_bits() methods race condition
- Fix invalid argument of write method called from
idt_reg_set_bits()/idt_reg_clear_bits() functions
- Add appropriate naming of function idt_get_mw_size()
- Fix some documentation notes
- Replace symbolic permission S_IRUSR with octal 0400

Changelog v4:
- Return ~0 on read from registers with invalid address
- Don't check bits validity on registers bits clearing
- Keep up driver loading (just print a warning) if there is no any peer
NTBs found
- Fix unnecessary branching logic
- Fix some documentation notes

Changelog v5:
- Fix minor documentation issues
- Replace writel/readl with iowrite32/ioread32 methods
- Discard dev_*() wrappers with origins
- Use pci_alloc_irq_vectors() for IRQ number and ISR initialization
- Use Mananged Device Resource as much as possible:
devm_request_threaded_irq(), pcim_iomap_regions_request_all()

Changelog v6:
- Fix "skip_bar may be used uninitialized" warning
- Replace skip_bar variable name with bar_64bit one

MAINTAINERS | 6 +
drivers/ntb/hw/Kconfig | 1 +
drivers/ntb/hw/Makefile | 1 +
drivers/ntb/hw/idt/Kconfig | 31 +
drivers/ntb/hw/idt/Makefile | 1 +
drivers/ntb/hw/idt/ntb_hw_idt.c | 2602 +++++++++++++++++++++++++++++++++++++++
drivers/ntb/hw/idt/ntb_hw_idt.h | 1149 +++++++++++++++++
7 files changed, 3791 insertions(+)
create mode 100644 drivers/ntb/hw/idt/Kconfig
create mode 100644 drivers/ntb/hw/idt/Makefile
create mode 100644 drivers/ntb/hw/idt/ntb_hw_idt.c
create mode 100644 drivers/ntb/hw/idt/ntb_hw_idt.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 5f10c28..4f66daf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8837,6 +8837,12 @@ F: include/linux/ntb.h
F: include/linux/ntb_transport.h
F: tools/testing/selftests/ntb/

+NTB IDT DRIVER
+M: Serge Semin <fancer.lancer@xxxxxxxxx>
+L: linux-ntb@xxxxxxxxxxxxxxxx
+S: Supported
+F: drivers/ntb/hw/idt/
+
NTB INTEL DRIVER
M: Jon Mason <jdmason@xxxxxxxx>
M: Dave Jiang <dave.jiang@xxxxxxxxx>
diff --git a/drivers/ntb/hw/Kconfig b/drivers/ntb/hw/Kconfig
index 7116472..a89243c 100644
--- a/drivers/ntb/hw/Kconfig
+++ b/drivers/ntb/hw/Kconfig
@@ -1,2 +1,3 @@
source "drivers/ntb/hw/amd/Kconfig"
+source "drivers/ntb/hw/idt/Kconfig"
source "drivers/ntb/hw/intel/Kconfig"
diff --git a/drivers/ntb/hw/Makefile b/drivers/ntb/hw/Makefile
index 532e085..87332c3 100644
--- a/drivers/ntb/hw/Makefile
+++ b/drivers/ntb/hw/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_NTB_AMD) += amd/
+obj-$(CONFIG_NTB_IDT) += idt/
obj-$(CONFIG_NTB_INTEL) += intel/
diff --git a/drivers/ntb/hw/idt/Kconfig b/drivers/ntb/hw/idt/Kconfig
new file mode 100644
index 0000000..b360e56
--- /dev/null
+++ b/drivers/ntb/hw/idt/Kconfig
@@ -0,0 +1,31 @@
+config NTB_IDT
+ tristate "IDT PCIe-switch Non-Transparent Bridge support"
+ depends on PCI
+ help
+ This driver supports NTB of cappable IDT PCIe-switches.
+
+ Some of the pre-initializations must be made before IDT PCIe-switch
+ exposes it NT-functions correctly. It should be done by either proper
+ initialisation of EEPROM connected to master smbus of the switch or
+ by BIOS using slave-SMBus interface changing corresponding registers
+ value. Evidently it must be done before PCI bus enumeration is
+ finished in Linux kernel.
+
+ First of all partitions must be activated and properly assigned to all
+ the ports with NT-functions intended to be activated (see SWPARTxCTL
+ and SWPORTxCTL registers). Then all NT-function BARs must be enabled
+ with chosen valid aperture. For memory windows related BARs the
+ aperture settings shall determine the maximum size of memory windows
+ accepted by a BAR. Note that BAR0 must map PCI configuration space
+ registers.
+
+ It's worth to note, that since a part of this driver relies on the
+ BAR settings of peer NT-functions, the BAR setups can't be done over
+ kernel PCI fixups. That's why the alternative pre-initialization
+ techniques like BIOS using SMBus interface or EEPROM should be
+ utilized. Additionally if one needs to have temperature sensor
+ information printed to system log, the corresponding registers must
+ be initialized within BIOS/EEPROM as well.
+
+ If unsure, say N.
+
diff --git a/drivers/ntb/hw/idt/Makefile b/drivers/ntb/hw/idt/Makefile
new file mode 100644
index 0000000..a102cf1
--- /dev/null
+++ b/drivers/ntb/hw/idt/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_NTB_IDT) += ntb_hw_idt.o
diff --git a/drivers/ntb/hw/idt/ntb_hw_idt.c b/drivers/ntb/hw/idt/ntb_hw_idt.c
new file mode 100644
index 0000000..f0f70d6
--- /dev/null
+++ b/drivers/ntb/hw/idt/ntb_hw_idt.c
@@ -0,0 +1,2602 @@
+/*
+ * This file is provided under a GPLv2 license. When using or
+ * redistributing this file, you may do so under that license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright (C) 2016 T-Platforms All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+ * Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, one can be found http://www.gnu.org/licenses/.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * IDT PCIe-switch NTB Linux driver
+ *
+ * Contact Information:
+ * Serge Semin <fancer.lancer@xxxxxxxxx>, <Sergey.Semin@xxxxxxxxxxxxxx>
+ */
+
+#include <linux/stddef.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/sizes.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/pci.h>
+#include <linux/aer.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/debugfs.h>
+#include <linux/ntb.h>
+
+#include "ntb_hw_idt.h"
+
+#define NTB_NAME "ntb_hw_idt"
+#define NTB_DESC "IDT PCI-E Non-Transparent Bridge Driver"
+#define NTB_VER "2.0"
+#define NTB_IRQNAME "ntb_irq_idt"
+
+MODULE_DESCRIPTION(NTB_DESC);
+MODULE_VERSION(NTB_VER);
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("T-platforms");
+
+/*
+ * NT Endpoint registers table simplifying a loop access to the functionally
+ * related registers
+ */
+static const struct idt_ntb_regs ntdata_tbl = {
+ { {IDT_NT_BARSETUP0, IDT_NT_BARLIMIT0,
+ IDT_NT_BARLTBASE0, IDT_NT_BARUTBASE0},
+ {IDT_NT_BARSETUP1, IDT_NT_BARLIMIT1,
+ IDT_NT_BARLTBASE1, IDT_NT_BARUTBASE1},
+ {IDT_NT_BARSETUP2, IDT_NT_BARLIMIT2,
+ IDT_NT_BARLTBASE2, IDT_NT_BARUTBASE2},
+ {IDT_NT_BARSETUP3, IDT_NT_BARLIMIT3,
+ IDT_NT_BARLTBASE3, IDT_NT_BARUTBASE3},
+ {IDT_NT_BARSETUP4, IDT_NT_BARLIMIT4,
+ IDT_NT_BARLTBASE4, IDT_NT_BARUTBASE4},
+ {IDT_NT_BARSETUP5, IDT_NT_BARLIMIT5,
+ IDT_NT_BARLTBASE5, IDT_NT_BARUTBASE5} },
+ { {IDT_NT_INMSG0, IDT_NT_OUTMSG0, IDT_NT_INMSGSRC0},
+ {IDT_NT_INMSG1, IDT_NT_OUTMSG1, IDT_NT_INMSGSRC1},
+ {IDT_NT_INMSG2, IDT_NT_OUTMSG2, IDT_NT_INMSGSRC2},
+ {IDT_NT_INMSG3, IDT_NT_OUTMSG3, IDT_NT_INMSGSRC3} }
+};
+
+/*
+ * NT Endpoint ports data table with the corresponding pcie command, link
+ * status, control and BAR-related registers
+ */
+static const struct idt_ntb_port portdata_tbl[IDT_MAX_NR_PORTS] = {
+/*0*/ { IDT_SW_NTP0_PCIECMDSTS, IDT_SW_NTP0_PCIELCTLSTS,
+ IDT_SW_NTP0_NTCTL,
+ IDT_SW_SWPORT0CTL, IDT_SW_SWPORT0STS,
+ { {IDT_SW_NTP0_BARSETUP0, IDT_SW_NTP0_BARLIMIT0,
+ IDT_SW_NTP0_BARLTBASE0, IDT_SW_NTP0_BARUTBASE0},
+ {IDT_SW_NTP0_BARSETUP1, IDT_SW_NTP0_BARLIMIT1,
+ IDT_SW_NTP0_BARLTBASE1, IDT_SW_NTP0_BARUTBASE1},
+ {IDT_SW_NTP0_BARSETUP2, IDT_SW_NTP0_BARLIMIT2,
+ IDT_SW_NTP0_BARLTBASE2, IDT_SW_NTP0_BARUTBASE2},
+ {IDT_SW_NTP0_BARSETUP3, IDT_SW_NTP0_BARLIMIT3,
+ IDT_SW_NTP0_BARLTBASE3, IDT_SW_NTP0_BARUTBASE3},
+ {IDT_SW_NTP0_BARSETUP4, IDT_SW_NTP0_BARLIMIT4,
+ IDT_SW_NTP0_BARLTBASE4, IDT_SW_NTP0_BARUTBASE4},
+ {IDT_SW_NTP0_BARSETUP5, IDT_SW_NTP0_BARLIMIT5,
+ IDT_SW_NTP0_BARLTBASE5, IDT_SW_NTP0_BARUTBASE5} } },
+/*1*/ {0},
+/*2*/ { IDT_SW_NTP2_PCIECMDSTS, IDT_SW_NTP2_PCIELCTLSTS,
+ IDT_SW_NTP2_NTCTL,
+ IDT_SW_SWPORT2CTL, IDT_SW_SWPORT2STS,
+ { {IDT_SW_NTP2_BARSETUP0, IDT_SW_NTP2_BARLIMIT0,
+ IDT_SW_NTP2_BARLTBASE0, IDT_SW_NTP2_BARUTBASE0},
+ {IDT_SW_NTP2_BARSETUP1, IDT_SW_NTP2_BARLIMIT1,
+ IDT_SW_NTP2_BARLTBASE1, IDT_SW_NTP2_BARUTBASE1},
+ {IDT_SW_NTP2_BARSETUP2, IDT_SW_NTP2_BARLIMIT2,
+ IDT_SW_NTP2_BARLTBASE2, IDT_SW_NTP2_BARUTBASE2},
+ {IDT_SW_NTP2_BARSETUP3, IDT_SW_NTP2_BARLIMIT3,
+ IDT_SW_NTP2_BARLTBASE3, IDT_SW_NTP2_BARUTBASE3},
+ {IDT_SW_NTP2_BARSETUP4, IDT_SW_NTP2_BARLIMIT4,
+ IDT_SW_NTP2_BARLTBASE4, IDT_SW_NTP2_BARUTBASE4},
+ {IDT_SW_NTP2_BARSETUP5, IDT_SW_NTP2_BARLIMIT5,
+ IDT_SW_NTP2_BARLTBASE5, IDT_SW_NTP2_BARUTBASE5} } },
+/*3*/ {0},
+/*4*/ { IDT_SW_NTP4_PCIECMDSTS, IDT_SW_NTP4_PCIELCTLSTS,
+ IDT_SW_NTP4_NTCTL,
+ IDT_SW_SWPORT4CTL, IDT_SW_SWPORT4STS,
+ { {IDT_SW_NTP4_BARSETUP0, IDT_SW_NTP4_BARLIMIT0,
+ IDT_SW_NTP4_BARLTBASE0, IDT_SW_NTP4_BARUTBASE0},
+ {IDT_SW_NTP4_BARSETUP1, IDT_SW_NTP4_BARLIMIT1,
+ IDT_SW_NTP4_BARLTBASE1, IDT_SW_NTP4_BARUTBASE1},
+ {IDT_SW_NTP4_BARSETUP2, IDT_SW_NTP4_BARLIMIT2,
+ IDT_SW_NTP4_BARLTBASE2, IDT_SW_NTP4_BARUTBASE2},
+ {IDT_SW_NTP4_BARSETUP3, IDT_SW_NTP4_BARLIMIT3,
+ IDT_SW_NTP4_BARLTBASE3, IDT_SW_NTP4_BARUTBASE3},
+ {IDT_SW_NTP4_BARSETUP4, IDT_SW_NTP4_BARLIMIT4,
+ IDT_SW_NTP4_BARLTBASE4, IDT_SW_NTP4_BARUTBASE4},
+ {IDT_SW_NTP4_BARSETUP5, IDT_SW_NTP4_BARLIMIT5,
+ IDT_SW_NTP4_BARLTBASE5, IDT_SW_NTP4_BARUTBASE5} } },
+/*5*/ {0},
+/*6*/ { IDT_SW_NTP6_PCIECMDSTS, IDT_SW_NTP6_PCIELCTLSTS,
+ IDT_SW_NTP6_NTCTL,
+ IDT_SW_SWPORT6CTL, IDT_SW_SWPORT6STS,
+ { {IDT_SW_NTP6_BARSETUP0, IDT_SW_NTP6_BARLIMIT0,
+ IDT_SW_NTP6_BARLTBASE0, IDT_SW_NTP6_BARUTBASE0},
+ {IDT_SW_NTP6_BARSETUP1, IDT_SW_NTP6_BARLIMIT1,
+ IDT_SW_NTP6_BARLTBASE1, IDT_SW_NTP6_BARUTBASE1},
+ {IDT_SW_NTP6_BARSETUP2, IDT_SW_NTP6_BARLIMIT2,
+ IDT_SW_NTP6_BARLTBASE2, IDT_SW_NTP6_BARUTBASE2},
+ {IDT_SW_NTP6_BARSETUP3, IDT_SW_NTP6_BARLIMIT3,
+ IDT_SW_NTP6_BARLTBASE3, IDT_SW_NTP6_BARUTBASE3},
+ {IDT_SW_NTP6_BARSETUP4, IDT_SW_NTP6_BARLIMIT4,
+ IDT_SW_NTP6_BARLTBASE4, IDT_SW_NTP6_BARUTBASE4},
+ {IDT_SW_NTP6_BARSETUP5, IDT_SW_NTP6_BARLIMIT5,
+ IDT_SW_NTP6_BARLTBASE5, IDT_SW_NTP6_BARUTBASE5} } },
+/*7*/ {0},
+/*8*/ { IDT_SW_NTP8_PCIECMDSTS, IDT_SW_NTP8_PCIELCTLSTS,
+ IDT_SW_NTP8_NTCTL,
+ IDT_SW_SWPORT8CTL, IDT_SW_SWPORT8STS,
+ { {IDT_SW_NTP8_BARSETUP0, IDT_SW_NTP8_BARLIMIT0,
+ IDT_SW_NTP8_BARLTBASE0, IDT_SW_NTP8_BARUTBASE0},
+ {IDT_SW_NTP8_BARSETUP1, IDT_SW_NTP8_BARLIMIT1,
+ IDT_SW_NTP8_BARLTBASE1, IDT_SW_NTP8_BARUTBASE1},
+ {IDT_SW_NTP8_BARSETUP2, IDT_SW_NTP8_BARLIMIT2,
+ IDT_SW_NTP8_BARLTBASE2, IDT_SW_NTP8_BARUTBASE2},
+ {IDT_SW_NTP8_BARSETUP3, IDT_SW_NTP8_BARLIMIT3,
+ IDT_SW_NTP8_BARLTBASE3, IDT_SW_NTP8_BARUTBASE3},
+ {IDT_SW_NTP8_BARSETUP4, IDT_SW_NTP8_BARLIMIT4,
+ IDT_SW_NTP8_BARLTBASE4, IDT_SW_NTP8_BARUTBASE4},
+ {IDT_SW_NTP8_BARSETUP5, IDT_SW_NTP8_BARLIMIT5,
+ IDT_SW_NTP8_BARLTBASE5, IDT_SW_NTP8_BARUTBASE5} } },
+/*9*/ {0},
+/*10*/ {0},
+/*11*/ {0},
+/*12*/ { IDT_SW_NTP12_PCIECMDSTS, IDT_SW_NTP12_PCIELCTLSTS,
+ IDT_SW_NTP12_NTCTL,
+ IDT_SW_SWPORT12CTL, IDT_SW_SWPORT12STS,
+ { {IDT_SW_NTP12_BARSETUP0, IDT_SW_NTP12_BARLIMIT0,
+ IDT_SW_NTP12_BARLTBASE0, IDT_SW_NTP12_BARUTBASE0},
+ {IDT_SW_NTP12_BARSETUP1, IDT_SW_NTP12_BARLIMIT1,
+ IDT_SW_NTP12_BARLTBASE1, IDT_SW_NTP12_BARUTBASE1},
+ {IDT_SW_NTP12_BARSETUP2, IDT_SW_NTP12_BARLIMIT2,
+ IDT_SW_NTP12_BARLTBASE2, IDT_SW_NTP12_BARUTBASE2},
+ {IDT_SW_NTP12_BARSETUP3, IDT_SW_NTP12_BARLIMIT3,
+ IDT_SW_NTP12_BARLTBASE3, IDT_SW_NTP12_BARUTBASE3},
+ {IDT_SW_NTP12_BARSETUP4, IDT_SW_NTP12_BARLIMIT4,
+ IDT_SW_NTP12_BARLTBASE4, IDT_SW_NTP12_BARUTBASE4},
+ {IDT_SW_NTP12_BARSETUP5, IDT_SW_NTP12_BARLIMIT5,
+ IDT_SW_NTP12_BARLTBASE5, IDT_SW_NTP12_BARUTBASE5} } },
+/*13*/ {0},
+/*14*/ {0},
+/*15*/ {0},
+/*16*/ { IDT_SW_NTP16_PCIECMDSTS, IDT_SW_NTP16_PCIELCTLSTS,
+ IDT_SW_NTP16_NTCTL,
+ IDT_SW_SWPORT16CTL, IDT_SW_SWPORT16STS,
+ { {IDT_SW_NTP16_BARSETUP0, IDT_SW_NTP16_BARLIMIT0,
+ IDT_SW_NTP16_BARLTBASE0, IDT_SW_NTP16_BARUTBASE0},
+ {IDT_SW_NTP16_BARSETUP1, IDT_SW_NTP16_BARLIMIT1,
+ IDT_SW_NTP16_BARLTBASE1, IDT_SW_NTP16_BARUTBASE1},
+ {IDT_SW_NTP16_BARSETUP2, IDT_SW_NTP16_BARLIMIT2,
+ IDT_SW_NTP16_BARLTBASE2, IDT_SW_NTP16_BARUTBASE2},
+ {IDT_SW_NTP16_BARSETUP3, IDT_SW_NTP16_BARLIMIT3,
+ IDT_SW_NTP16_BARLTBASE3, IDT_SW_NTP16_BARUTBASE3},
+ {IDT_SW_NTP16_BARSETUP4, IDT_SW_NTP16_BARLIMIT4,
+ IDT_SW_NTP16_BARLTBASE4, IDT_SW_NTP16_BARUTBASE4},
+ {IDT_SW_NTP16_BARSETUP5, IDT_SW_NTP16_BARLIMIT5,
+ IDT_SW_NTP16_BARLTBASE5, IDT_SW_NTP16_BARUTBASE5} } },
+/*17*/ {0},
+/*18*/ {0},
+/*19*/ {0},
+/*20*/ { IDT_SW_NTP20_PCIECMDSTS, IDT_SW_NTP20_PCIELCTLSTS,
+ IDT_SW_NTP20_NTCTL,
+ IDT_SW_SWPORT20CTL, IDT_SW_SWPORT20STS,
+ { {IDT_SW_NTP20_BARSETUP0, IDT_SW_NTP20_BARLIMIT0,
+ IDT_SW_NTP20_BARLTBASE0, IDT_SW_NTP20_BARUTBASE0},
+ {IDT_SW_NTP20_BARSETUP1, IDT_SW_NTP20_BARLIMIT1,
+ IDT_SW_NTP20_BARLTBASE1, IDT_SW_NTP20_BARUTBASE1},
+ {IDT_SW_NTP20_BARSETUP2, IDT_SW_NTP20_BARLIMIT2,
+ IDT_SW_NTP20_BARLTBASE2, IDT_SW_NTP20_BARUTBASE2},
+ {IDT_SW_NTP20_BARSETUP3, IDT_SW_NTP20_BARLIMIT3,
+ IDT_SW_NTP20_BARLTBASE3, IDT_SW_NTP20_BARUTBASE3},
+ {IDT_SW_NTP20_BARSETUP4, IDT_SW_NTP20_BARLIMIT4,
+ IDT_SW_NTP20_BARLTBASE4, IDT_SW_NTP20_BARUTBASE4},
+ {IDT_SW_NTP20_BARSETUP5, IDT_SW_NTP20_BARLIMIT5,
+ IDT_SW_NTP20_BARLTBASE5, IDT_SW_NTP20_BARUTBASE5} } },
+/*21*/ {0},
+/*22*/ {0},
+/*23*/ {0}
+};
+
+/*
+ * IDT PCIe-switch partitions table with the corresponding control, status
+ * and messages control registers
+ */
+static const struct idt_ntb_part partdata_tbl[IDT_MAX_NR_PARTS] = {
+/*0*/ { IDT_SW_SWPART0CTL, IDT_SW_SWPART0STS,
+ {IDT_SW_SWP0MSGCTL0, IDT_SW_SWP0MSGCTL1,
+ IDT_SW_SWP0MSGCTL2, IDT_SW_SWP0MSGCTL3} },
+/*1*/ { IDT_SW_SWPART1CTL, IDT_SW_SWPART1STS,
+ {IDT_SW_SWP1MSGCTL0, IDT_SW_SWP1MSGCTL1,
+ IDT_SW_SWP1MSGCTL2, IDT_SW_SWP1MSGCTL3} },
+/*2*/ { IDT_SW_SWPART2CTL, IDT_SW_SWPART2STS,
+ {IDT_SW_SWP2MSGCTL0, IDT_SW_SWP2MSGCTL1,
+ IDT_SW_SWP2MSGCTL2, IDT_SW_SWP2MSGCTL3} },
+/*3*/ { IDT_SW_SWPART3CTL, IDT_SW_SWPART3STS,
+ {IDT_SW_SWP3MSGCTL0, IDT_SW_SWP3MSGCTL1,
+ IDT_SW_SWP3MSGCTL2, IDT_SW_SWP3MSGCTL3} },
+/*4*/ { IDT_SW_SWPART4CTL, IDT_SW_SWPART4STS,
+ {IDT_SW_SWP4MSGCTL0, IDT_SW_SWP4MSGCTL1,
+ IDT_SW_SWP4MSGCTL2, IDT_SW_SWP4MSGCTL3} },
+/*5*/ { IDT_SW_SWPART5CTL, IDT_SW_SWPART5STS,
+ {IDT_SW_SWP5MSGCTL0, IDT_SW_SWP5MSGCTL1,
+ IDT_SW_SWP5MSGCTL2, IDT_SW_SWP5MSGCTL3} },
+/*6*/ { IDT_SW_SWPART6CTL, IDT_SW_SWPART6STS,
+ {IDT_SW_SWP6MSGCTL0, IDT_SW_SWP6MSGCTL1,
+ IDT_SW_SWP6MSGCTL2, IDT_SW_SWP6MSGCTL3} },
+/*7*/ { IDT_SW_SWPART7CTL, IDT_SW_SWPART7STS,
+ {IDT_SW_SWP7MSGCTL0, IDT_SW_SWP7MSGCTL1,
+ IDT_SW_SWP7MSGCTL2, IDT_SW_SWP7MSGCTL3} }
+};
+
+/*
+ * DebugFS directory to place the driver debug file
+ */
+static struct dentry *dbgfs_topdir;
+
+/*=============================================================================
+ * 1. IDT PCIe-switch registers IO-functions
+ *
+ * Beside ordinary configuration space registers IDT PCIe-switch expose
+ * global configuration registers, which are used to determine state of other
+ * device ports as well as being notified of some switch-related events.
+ * Additionally all the configuration space registers of all the IDT
+ * PCIe-switch functions are mapped to the Global Address space, so each
+ * function can determine a configuration of any other PCI-function.
+ * Functions declared in this chapter are created to encapsulate access
+ * to configuration and global registers, so the driver code just need to
+ * provide IDT NTB hardware descriptor and a register address.
+ *=============================================================================
+ */
+
+/*
+ * idt_nt_write() - PCI configuration space registers write method
+ * @ndev: IDT NTB hardware driver descriptor
+ * @reg: Register to write data to
+ * @data: Value to write to the register
+ *
+ * IDT PCIe-switch registers are all Little endian.
+ */
+static void idt_nt_write(struct idt_ntb_dev *ndev,
+ const unsigned int reg, const u32 data)
+{
+ /*
+ * It's obvious bug to request a register exceeding the maximum possible
+ * value as well as to have it unaligned.
+ */
+ if (WARN_ON(reg > IDT_REG_PCI_MAX || !IS_ALIGNED(reg, IDT_REG_ALIGN)))
+ return;
+
+ /* Just write the value to the specified register */
+ iowrite32(data, ndev->cfgspc + (ptrdiff_t)reg);
+}
+
+/*
+ * idt_nt_read() - PCI configuration space registers read method
+ * @ndev: IDT NTB hardware driver descriptor
+ * @reg: Register to write data to
+ *
+ * IDT PCIe-switch Global configuration registers are all Little endian.
+ *
+ * Return: register value
+ */
+static u32 idt_nt_read(struct idt_ntb_dev *ndev, const unsigned int reg)
+{
+ /*
+ * It's obvious bug to request a register exceeding the maximum possible
+ * value as well as to have it unaligned.
+ */
+ if (WARN_ON(reg > IDT_REG_PCI_MAX || !IS_ALIGNED(reg, IDT_REG_ALIGN)))
+ return ~0;
+
+ /* Just read the value from the specified register */
+ return ioread32(ndev->cfgspc + (ptrdiff_t)reg);
+}
+
+/*
+ * idt_sw_write() - Global registers write method
+ * @ndev: IDT NTB hardware driver descriptor
+ * @reg: Register to write data to
+ * @data: Value to write to the register
+ *
+ * IDT PCIe-switch Global configuration registers are all Little endian.
+ */
+static void idt_sw_write(struct idt_ntb_dev *ndev,
+ const unsigned int reg, const u32 data)
+{
+ unsigned long irqflags;
+
+ /*
+ * It's obvious bug to request a register exceeding the maximum possible
+ * value as well as to have it unaligned.
+ */
+ if (WARN_ON(reg > IDT_REG_SW_MAX || !IS_ALIGNED(reg, IDT_REG_ALIGN)))
+ return;
+
+ /* Lock GASA registers operations */
+ spin_lock_irqsave(&ndev->gasa_lock, irqflags);
+ /* Set the global register address */
+ iowrite32((u32)reg, ndev->cfgspc + (ptrdiff_t)IDT_NT_GASAADDR);
+ /* Put the new value of the register */
+ iowrite32(data, ndev->cfgspc + (ptrdiff_t)IDT_NT_GASADATA);
+ /* Unlock GASA registers operations */
+ spin_unlock_irqrestore(&ndev->gasa_lock, irqflags);
+}
+
+/*
+ * idt_sw_read() - Global registers read method
+ * @ndev: IDT NTB hardware driver descriptor
+ * @reg: Register to write data to
+ *
+ * IDT PCIe-switch Global configuration registers are all Little endian.
+ *
+ * Return: register value
+ */
+static u32 idt_sw_read(struct idt_ntb_dev *ndev, const unsigned int reg)
+{
+ unsigned long irqflags;
+ u32 data;
+
+ /*
+ * It's obvious bug to request a register exceeding the maximum possible
+ * value as well as to have it unaligned.
+ */
+ if (WARN_ON(reg > IDT_REG_SW_MAX || !IS_ALIGNED(reg, IDT_REG_ALIGN)))
+ return ~0;
+
+ /* Lock GASA registers operations */
+ spin_lock_irqsave(&ndev->gasa_lock, irqflags);
+ /* Set the global register address */
+ iowrite32((u32)reg, ndev->cfgspc + (ptrdiff_t)IDT_NT_GASAADDR);
+ /* Get the data of the register */
+ data = ioread32(ndev->cfgspc + (ptrdiff_t)IDT_NT_GASADATA);
+ /* Unlock GASA registers operations */
+ spin_unlock_irqrestore(&ndev->gasa_lock, irqflags);
+
+ return data;
+}
+
+/*
+ * idt_reg_set_bits() - set bits of a passed register
+ * @ndev: IDT NTB hardware driver descriptor
+ * @reg: Register to change bits of
+ * @reg_lock: Register access spin lock
+ * @valid_mask: Mask of valid bits
+ * @set_bits: Bitmask to set
+ *
+ * Helper method to check whether a passed bitfield is valid and set
+ * corresponding bits of a register.
+ *
+ * WARNING! Make sure the passed register isn't accessed over plane
+ * idt_nt_write() method (read method is ok to be used concurrently).
+ *
+ * Return: zero on success, negative error on invalid bitmask.
+ */
+static inline int idt_reg_set_bits(struct idt_ntb_dev *ndev, unsigned int reg,
+ spinlock_t *reg_lock,
+ u64 valid_mask, u64 set_bits)
+{
+ unsigned long irqflags;
+ u32 data;
+
+ if (set_bits & ~(u64)valid_mask)
+ return -EINVAL;
+
+ /* Lock access to the register unless the change is written back */
+ spin_lock_irqsave(reg_lock, irqflags);
+ data = idt_nt_read(ndev, reg) | (u32)set_bits;
+ idt_nt_write(ndev, reg, data);
+ /* Unlock the register */
+ spin_unlock_irqrestore(reg_lock, irqflags);
+
+ return 0;
+}
+
+/*
+ * idt_reg_clear_bits() - clear bits of a passed register
+ * @ndev: IDT NTB hardware driver descriptor
+ * @reg: Register to change bits of
+ * @reg_lock: Register access spin lock
+ * @set_bits: Bitmask to clear
+ *
+ * Helper method to check whether a passed bitfield is valid and clear
+ * corresponding bits of a register.
+ *
+ * NOTE! Invalid bits are always considered cleared so it's not an error
+ * to clear them over.
+ *
+ * WARNING! Make sure the passed register isn't accessed over plane
+ * idt_nt_write() method (read method is ok to use concurrently).
+ */
+static inline void idt_reg_clear_bits(struct idt_ntb_dev *ndev,
+ unsigned int reg, spinlock_t *reg_lock,
+ u64 clear_bits)
+{
+ unsigned long irqflags;
+ u32 data;
+
+ /* Lock access to the register unless the change is written back */
+ spin_lock_irqsave(reg_lock, irqflags);
+ data = idt_nt_read(ndev, reg) & ~(u32)clear_bits;
+ idt_nt_write(ndev, reg, data);
+ /* Unlock the register */
+ spin_unlock_irqrestore(reg_lock, irqflags);
+}
+
+/*===========================================================================
+ * 2. Ports operations
+ *
+ * IDT PCIe-switches can have from 3 up to 8 ports with possible
+ * NT-functions enabled. So all the possible ports need to be scanned looking
+ * for NTB activated. NTB API will have enumerated only the ports with NTB.
+ *===========================================================================
+ */
+
+/*
+ * idt_scan_ports() - scan IDT PCIe-switch ports collecting info in the tables
+ * @ndev: Pointer to the PCI device descriptor
+ *
+ * Return: zero on success, otherwise a negative error number.
+ */
+static int idt_scan_ports(struct idt_ntb_dev *ndev)
+{
+ unsigned char pidx, port, part;
+ u32 data, portsts, partsts;
+
+ /* Retrieve the local port number */
+ data = idt_nt_read(ndev, IDT_NT_PCIELCAP);
+ ndev->port = GET_FIELD(PCIELCAP_PORTNUM, data);
+
+ /* Retrieve the local partition number */
+ portsts = idt_sw_read(ndev, portdata_tbl[ndev->port].sts);
+ ndev->part = GET_FIELD(SWPORTxSTS_SWPART, portsts);
+
+ /* Initialize port/partition -> index tables with invalid values */
+ memset(ndev->port_idx_map, -EINVAL, sizeof(ndev->port_idx_map));
+ memset(ndev->part_idx_map, -EINVAL, sizeof(ndev->part_idx_map));
+
+ /*
+ * Walk over all the possible ports checking whether any of them has
+ * NT-function activated
+ */
+ ndev->peer_cnt = 0;
+ for (pidx = 0; pidx < ndev->swcfg->port_cnt; pidx++) {
+ port = ndev->swcfg->ports[pidx];
+ /* Skip local port */
+ if (port == ndev->port)
+ continue;
+
+ /* Read the port status register to get it partition */
+ portsts = idt_sw_read(ndev, portdata_tbl[port].sts);
+ part = GET_FIELD(SWPORTxSTS_SWPART, portsts);
+
+ /* Retrieve the partition status */
+ partsts = idt_sw_read(ndev, partdata_tbl[part].sts);
+ /* Check if partition state is active and port has NTB */
+ if (IS_FLD_SET(SWPARTxSTS_STATE, partsts, ACT) &&
+ (IS_FLD_SET(SWPORTxSTS_MODE, portsts, NT) ||
+ IS_FLD_SET(SWPORTxSTS_MODE, portsts, USNT) ||
+ IS_FLD_SET(SWPORTxSTS_MODE, portsts, USNTDMA) ||
+ IS_FLD_SET(SWPORTxSTS_MODE, portsts, NTDMA))) {
+ /* Save the port and partition numbers */
+ ndev->peers[ndev->peer_cnt].port = port;
+ ndev->peers[ndev->peer_cnt].part = part;
+ /* Fill in the port/partition -> index tables */
+ ndev->port_idx_map[port] = ndev->peer_cnt;
+ ndev->part_idx_map[part] = ndev->peer_cnt;
+ ndev->peer_cnt++;
+ }
+ }
+
+ dev_dbg(&ndev->ntb.pdev->dev, "Local port: %hhu, num of peers: %hhu\n",
+ ndev->port, ndev->peer_cnt);
+
+ /* It's useless to have this driver loaded if there is no any peer */
+ if (ndev->peer_cnt == 0) {
+ dev_warn(&ndev->ntb.pdev->dev, "No active peer found\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+/*
+ * idt_ntb_port_number() - get the local port number
+ * @ntb: NTB device context.
+ *
+ * Return: the local port number
+ */
+static int idt_ntb_port_number(struct ntb_dev *ntb)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ return ndev->port;
+}
+
+/*
+ * idt_ntb_peer_port_count() - get the number of peer ports
+ * @ntb: NTB device context.
+ *
+ * Return the count of detected peer NT-functions.
+ *
+ * Return: number of peer ports
+ */
+static int idt_ntb_peer_port_count(struct ntb_dev *ntb)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ return ndev->peer_cnt;
+}
+
+/*
+ * idt_ntb_peer_port_number() - get peer port by given index
+ * @ntb: NTB device context.
+ * @pidx: Peer port index.
+ *
+ * Return: peer port or negative error
+ */
+static int idt_ntb_peer_port_number(struct ntb_dev *ntb, int pidx)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ if (pidx < 0 || ndev->peer_cnt <= pidx)
+ return -EINVAL;
+
+ /* Return the detected NT-function port number */
+ return ndev->peers[pidx].port;
+}
+
+/*
+ * idt_ntb_peer_port_idx() - get peer port index by given port number
+ * @ntb: NTB device context.
+ * @port: Peer port number.
+ *
+ * Internal port -> index table is pre-initialized with -EINVAL values,
+ * so we just need to return it value
+ *
+ * Return: peer NT-function port index or negative error
+ */
+static int idt_ntb_peer_port_idx(struct ntb_dev *ntb, int port)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ if (port < 0 || IDT_MAX_NR_PORTS <= port)
+ return -EINVAL;
+
+ return ndev->port_idx_map[port];
+}
+
+/*===========================================================================
+ * 3. Link status operations
+ * There is no any ready-to-use method to have peer ports notified if NTB
+ * link is set up or got down. Instead global signal can be used instead.
+ * In case if any one of ports changes local NTB link state, it sends
+ * global signal and clears corresponding global state bit. Then all the ports
+ * receive a notification of that, so to make client driver being aware of
+ * possible NTB link change.
+ * Additionally each of active NT-functions is subscribed to PCIe-link
+ * state changes of peer ports.
+ *===========================================================================
+ */
+
+static void idt_ntb_local_link_disable(struct idt_ntb_dev *ndev);
+
+/*
+ * idt_init_link() - Initialize NTB link state notification subsystem
+ * @ndev: IDT NTB hardware driver descriptor
+ *
+ * Function performs the basic initialization of some global registers
+ * needed to enable IRQ-based notifications of PCIe Link Up/Down and
+ * Global Signal events.
+ * NOTE Since it's not possible to determine when all the NTB peer drivers are
+ * unloaded as well as have those registers accessed concurrently, we must
+ * preinitialize them with the same value and leave it uncleared on local
+ * driver unload.
+ */
+static void idt_init_link(struct idt_ntb_dev *ndev)
+{
+ u32 part_mask, port_mask, se_mask;
+ unsigned char pidx;
+
+ /* Initialize spin locker of Mapping Table access registers */
+ spin_lock_init(&ndev->mtbl_lock);
+
+ /* Walk over all detected peers collecting port and partition masks */
+ port_mask = ~BIT(ndev->port);
+ part_mask = ~BIT(ndev->part);
+ for (pidx = 0; pidx < ndev->peer_cnt; pidx++) {
+ port_mask &= ~BIT(ndev->peers[pidx].port);
+ part_mask &= ~BIT(ndev->peers[pidx].part);
+ }
+
+ /* Clean the Link Up/Down and GLobal Signal status registers */
+ idt_sw_write(ndev, IDT_SW_SELINKUPSTS, (u32)-1);
+ idt_sw_write(ndev, IDT_SW_SELINKDNSTS, (u32)-1);
+ idt_sw_write(ndev, IDT_SW_SEGSIGSTS, (u32)-1);
+
+ /* Unmask NT-activated partitions to receive Global Switch events */
+ idt_sw_write(ndev, IDT_SW_SEPMSK, part_mask);
+
+ /* Enable PCIe Link Up events of NT-activated ports */
+ idt_sw_write(ndev, IDT_SW_SELINKUPMSK, port_mask);
+
+ /* Enable PCIe Link Down events of NT-activated ports */
+ idt_sw_write(ndev, IDT_SW_SELINKDNMSK, port_mask);
+
+ /* Unmask NT-activated partitions to receive Global Signal events */
+ idt_sw_write(ndev, IDT_SW_SEGSIGMSK, part_mask);
+
+ /* Unmask Link Up/Down and Global Switch Events */
+ se_mask = ~(IDT_SEMSK_LINKUP | IDT_SEMSK_LINKDN | IDT_SEMSK_GSIGNAL);
+ idt_sw_write(ndev, IDT_SW_SEMSK, se_mask);
+
+ dev_dbg(&ndev->ntb.pdev->dev, "NTB link status events initialized");
+}
+
+/*
+ * idt_deinit_link() - deinitialize link subsystem
+ * @ndev: IDT NTB hardware driver descriptor
+ *
+ * Just disable the link back.
+ */
+static void idt_deinit_link(struct idt_ntb_dev *ndev)
+{
+ /* Disable the link */
+ idt_ntb_local_link_disable(ndev);
+
+ dev_dbg(&ndev->ntb.pdev->dev, "NTB link status events deinitialized");
+}
+
+/*
+ * idt_se_isr() - switch events ISR
+ * @ndev: IDT NTB hardware driver descriptor
+ * @ntint_sts: NT-function interrupt status
+ *
+ * This driver doesn't support IDT PCIe-switch dynamic reconfigurations,
+ * Failover capability, etc, so switch events are utilized to notify of
+ * PCIe and NTB link events.
+ * The method is called from PCIe ISR bottom-half routine.
+ */
+static void idt_se_isr(struct idt_ntb_dev *ndev, u32 ntint_sts)
+{
+ u32 sests;
+
+ /* Read Switch Events status */
+ sests = idt_sw_read(ndev, IDT_SW_SESTS);
+
+ /* Clean the Link Up/Down and Global Signal status registers */
+ idt_sw_write(ndev, IDT_SW_SELINKUPSTS, (u32)-1);
+ idt_sw_write(ndev, IDT_SW_SELINKDNSTS, (u32)-1);
+ idt_sw_write(ndev, IDT_SW_SEGSIGSTS, (u32)-1);
+
+ /* Clean the corresponding interrupt bit */
+ idt_nt_write(ndev, IDT_NT_NTINTSTS, IDT_NTINTSTS_SEVENT);
+
+ dev_dbg(&ndev->ntb.pdev->dev, "SE IRQ detected %#08x (SESTS %#08x)",
+ ntint_sts, sests);
+
+ /* Notify the client driver of possible link state change */
+ ntb_link_event(&ndev->ntb);
+}
+
+/*
+ * idt_ntb_local_link_enable() - enable the local NTB link.
+ * @ndev: IDT NTB hardware driver descriptor
+ *
+ * In order to enable the NTB link we need:
+ * - enable Completion TLPs translation
+ * - initialize mapping table to enable the Request ID translation
+ * - notify peers of NTB link state change
+ */
+static void idt_ntb_local_link_enable(struct idt_ntb_dev *ndev)
+{
+ u32 reqid, mtbldata = 0;
+ unsigned long irqflags;
+
+ /* Enable the ID protection and Completion TLPs translation */
+ idt_nt_write(ndev, IDT_NT_NTCTL, IDT_NTCTL_CPEN);
+
+ /* Retrieve the current Requester ID (Bus:Device:Function) */
+ reqid = idt_nt_read(ndev, IDT_NT_REQIDCAP);
+
+ /*
+ * Set the corresponding NT Mapping table entry of port partition index
+ * with the data to perform the Request ID translation
+ */
+ mtbldata = SET_FIELD(NTMTBLDATA_REQID, 0, reqid) |
+ SET_FIELD(NTMTBLDATA_PART, 0, ndev->part) |
+ IDT_NTMTBLDATA_VALID;
+ spin_lock_irqsave(&ndev->mtbl_lock, irqflags);
+ idt_nt_write(ndev, IDT_NT_NTMTBLADDR, ndev->part);
+ idt_nt_write(ndev, IDT_NT_NTMTBLDATA, mtbldata);
+ spin_unlock_irqrestore(&ndev->mtbl_lock, irqflags);
+
+ /* Notify the peers by setting and clearing the global signal bit */
+ idt_nt_write(ndev, IDT_NT_NTGSIGNAL, IDT_NTGSIGNAL_SET);
+ idt_sw_write(ndev, IDT_SW_SEGSIGSTS, (u32)1 << ndev->part);
+}
+
+/*
+ * idt_ntb_local_link_disable() - disable the local NTB link.
+ * @ndev: IDT NTB hardware driver descriptor
+ *
+ * In order to enable the NTB link we need:
+ * - disable Completion TLPs translation
+ * - clear corresponding mapping table entry
+ * - notify peers of NTB link state change
+ */
+static void idt_ntb_local_link_disable(struct idt_ntb_dev *ndev)
+{
+ unsigned long irqflags;
+
+ /* Disable Completion TLPs translation */
+ idt_nt_write(ndev, IDT_NT_NTCTL, 0);
+
+ /* Clear the corresponding NT Mapping table entry */
+ spin_lock_irqsave(&ndev->mtbl_lock, irqflags);
+ idt_nt_write(ndev, IDT_NT_NTMTBLADDR, ndev->part);
+ idt_nt_write(ndev, IDT_NT_NTMTBLDATA, 0);
+ spin_unlock_irqrestore(&ndev->mtbl_lock, irqflags);
+
+ /* Notify the peers by setting and clearing the global signal bit */
+ idt_nt_write(ndev, IDT_NT_NTGSIGNAL, IDT_NTGSIGNAL_SET);
+ idt_sw_write(ndev, IDT_SW_SEGSIGSTS, (u32)1 << ndev->part);
+}
+
+/*
+ * idt_ntb_local_link_is_up() - test wethter local NTB link is up
+ * @ndev: IDT NTB hardware driver descriptor
+ *
+ * Local link is up under the following conditions:
+ * - Bus mastering is enabled
+ * - NTCTL has Completion TLPs translation enabled
+ * - Mapping table permits Request TLPs translation
+ * NOTE: We don't need to check PCIe link state since it's obviously
+ * up while we are able to communicate with IDT PCIe-switch
+ *
+ * Return: true if link is up, otherwise false
+ */
+static bool idt_ntb_local_link_is_up(struct idt_ntb_dev *ndev)
+{
+ unsigned long irqflags;
+ u32 data;
+
+ /* Read the local Bus Master Enable status */
+ data = idt_nt_read(ndev, IDT_NT_PCICMDSTS);
+ if (!(data & IDT_PCICMDSTS_BME))
+ return false;
+
+ /* Read the local Completion TLPs translation enable status */
+ data = idt_nt_read(ndev, IDT_NT_NTCTL);
+ if (!(data & IDT_NTCTL_CPEN))
+ return false;
+
+ /* Read Mapping table entry corresponding to the local partition */
+ spin_lock_irqsave(&ndev->mtbl_lock, irqflags);
+ idt_nt_write(ndev, IDT_NT_NTMTBLADDR, ndev->part);
+ data = idt_nt_read(ndev, IDT_NT_NTMTBLDATA);
+ spin_unlock_irqrestore(&ndev->mtbl_lock, irqflags);
+
+ return !!(data & IDT_NTMTBLDATA_VALID);
+}
+
+/*
+ * idt_ntb_peer_link_is_up() - test whether peer NTB link is up
+ * @ndev: IDT NTB hardware driver descriptor
+ * @pidx: Peer port index
+ *
+ * Peer link is up under the following conditions:
+ * - PCIe link is up
+ * - Bus mastering is enabled
+ * - NTCTL has Completion TLPs translation enabled
+ * - Mapping table permits Request TLPs translation
+ *
+ * Return: true if link is up, otherwise false
+ */
+static bool idt_ntb_peer_link_is_up(struct idt_ntb_dev *ndev, int pidx)
+{
+ unsigned long irqflags;
+ unsigned char port;
+ u32 data;
+
+ /* Retrieve the device port number */
+ port = ndev->peers[pidx].port;
+
+ /* Check whether PCIe link is up */
+ data = idt_sw_read(ndev, portdata_tbl[port].sts);
+ if (!(data & IDT_SWPORTxSTS_LINKUP))
+ return false;
+
+ /* Check whether bus mastering is enabled on the peer port */
+ data = idt_sw_read(ndev, portdata_tbl[port].pcicmdsts);
+ if (!(data & IDT_PCICMDSTS_BME))
+ return false;
+
+ /* Check if Completion TLPs translation is enabled on the peer port */
+ data = idt_sw_read(ndev, portdata_tbl[port].ntctl);
+ if (!(data & IDT_NTCTL_CPEN))
+ return false;
+
+ /* Read Mapping table entry corresponding to the peer partition */
+ spin_lock_irqsave(&ndev->mtbl_lock, irqflags);
+ idt_nt_write(ndev, IDT_NT_NTMTBLADDR, ndev->peers[pidx].part);
+ data = idt_nt_read(ndev, IDT_NT_NTMTBLDATA);
+ spin_unlock_irqrestore(&ndev->mtbl_lock, irqflags);
+
+ return !!(data & IDT_NTMTBLDATA_VALID);
+}
+
+/*
+ * idt_ntb_link_is_up() - get the current ntb link state (NTB API callback)
+ * @ntb: NTB device context.
+ * @speed: OUT - The link speed expressed as PCIe generation number.
+ * @width: OUT - The link width expressed as the number of PCIe lanes.
+ *
+ * Get the bitfield of NTB link states for all peer ports
+ *
+ * Return: bitfield of indexed ports link state: bit is set/cleared if the
+ * link is up/down respectively.
+ */
+static u64 idt_ntb_link_is_up(struct ntb_dev *ntb,
+ enum ntb_speed *speed, enum ntb_width *width)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+ unsigned char pidx;
+ u64 status;
+ u32 data;
+
+ /* Retrieve the local link speed and width */
+ if (speed != NULL || width != NULL) {
+ data = idt_nt_read(ndev, IDT_NT_PCIELCTLSTS);
+ if (speed != NULL)
+ *speed = GET_FIELD(PCIELCTLSTS_CLS, data);
+ if (width != NULL)
+ *width = GET_FIELD(PCIELCTLSTS_NLW, data);
+ }
+
+ /* If local NTB link isn't up then all the links are considered down */
+ if (!idt_ntb_local_link_is_up(ndev))
+ return 0;
+
+ /* Collect all the peer ports link states into the bitfield */
+ status = 0;
+ for (pidx = 0; pidx < ndev->peer_cnt; pidx++) {
+ if (idt_ntb_peer_link_is_up(ndev, pidx))
+ status |= ((u64)1 << pidx);
+ }
+
+ return status;
+}
+
+/*
+ * idt_ntb_link_enable() - enable local port ntb link (NTB API callback)
+ * @ntb: NTB device context.
+ * @max_speed: The maximum link speed expressed as PCIe generation number.
+ * @max_width: The maximum link width expressed as the number of PCIe lanes.
+ *
+ * Enable just local NTB link. PCIe link parameters are ignored.
+ *
+ * Return: always zero.
+ */
+static int idt_ntb_link_enable(struct ntb_dev *ntb, enum ntb_speed speed,
+ enum ntb_width width)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ /* Just enable the local NTB link */
+ idt_ntb_local_link_enable(ndev);
+
+ dev_dbg(&ndev->ntb.pdev->dev, "Local NTB link enabled");
+
+ return 0;
+}
+
+/*
+ * idt_ntb_link_disable() - disable local port ntb link (NTB API callback)
+ * @ntb: NTB device context.
+ *
+ * Disable just local NTB link.
+ *
+ * Return: always zero.
+ */
+static int idt_ntb_link_disable(struct ntb_dev *ntb)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ /* Just disable the local NTB link */
+ idt_ntb_local_link_disable(ndev);
+
+ dev_dbg(&ndev->ntb.pdev->dev, "Local NTB link disabled");
+
+ return 0;
+}
+
+/*=============================================================================
+ * 4. Memory Window operations
+ *
+ * IDT PCIe-switches have two types of memory windows: MWs with direct
+ * address translation and MWs with LUT based translation. The first type of
+ * MWs is simple map of corresponding BAR address space to a memory space
+ * of specified target port. So it implemets just ont-to-one mapping. Lookup
+ * table in its turn can map one BAR address space to up to 24 different
+ * memory spaces of different ports.
+ * NT-functions BARs can be turned on to implement either direct or lookup
+ * table based address translations, so:
+ * BAR0 - NT configuration registers space/direct address translation
+ * BAR1 - direct address translation/upper address of BAR0x64
+ * BAR2 - direct address translation/Lookup table with either 12 or 24 entries
+ * BAR3 - direct address translation/upper address of BAR2x64
+ * BAR4 - direct address translation/Lookup table with either 12 or 24 entries
+ * BAR5 - direct address translation/upper address of BAR4x64
+ * Additionally BAR2 and BAR4 can't have 24-entries LUT enabled at the same
+ * time. Since the BARs setup can be rather complicated this driver implements
+ * a scanning algorithm to have all the possible memory windows configuration
+ * covered.
+ *
+ * NOTE 1 BAR setup must be done before Linux kernel enumerated NT-function
+ * of any port, so this driver would have memory windows configurations fixed.
+ * In this way all initializations must be performed either by platform BIOS
+ * or using EEPROM connected to IDT PCIe-switch master SMBus.
+ *
+ * NOTE 2 This driver expects BAR0 mapping NT-function configuration space.
+ * Easy calculation can give us an upper boundary of 29 possible memory windows
+ * per each NT-function if all the BARs are of 32bit type.
+ *=============================================================================
+ */
+
+/*
+ * idt_get_mw_count() - get memory window count
+ * @mw_type: Memory window type
+ *
+ * Return: number of memory windows with respect to the BAR type
+ */
+static inline unsigned char idt_get_mw_count(enum idt_mw_type mw_type)
+{
+ switch (mw_type) {
+ case IDT_MW_DIR:
+ return 1;
+ case IDT_MW_LUT12:
+ return 12;
+ case IDT_MW_LUT24:
+ return 24;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * idt_scan_mws() - scan memory windows of the port
+ * @ndev: IDT NTB hardware driver descriptor
+ * @port: Port to get number of memory windows for
+ * @mw_cnt: Out - number of memory windows
+ *
+ * It walks over BAR setup registers of the specified port and determines
+ * the memory windows parameters if any activated.
+ *
+ * Return: array of memory windows
+ */
+static struct idt_mw_cfg *idt_scan_mws(struct idt_ntb_dev *ndev, int port,
+ unsigned char *mw_cnt)
+{
+ struct idt_mw_cfg mws[IDT_MAX_NR_MWS], *ret_mws;
+ const struct idt_ntb_bar *bars;
+ enum idt_mw_type mw_type;
+ unsigned char widx, bidx, en_cnt;
+ bool bar_64bit = false;
+ int aprt_size;
+ u32 data;
+
+ /* Retrieve the array of the BARs registers */
+ bars = portdata_tbl[port].bars;
+
+ /* Scan all the BARs belonging to the port */
+ *mw_cnt = 0;
+ for (bidx = 0; bidx < IDT_BAR_CNT; bidx += 1 + bar_64bit) {
+ /* Read BARSETUP register value */
+ data = idt_sw_read(ndev, bars[bidx].setup);
+
+ /* Skip disabled BARs */
+ if (!(data & IDT_BARSETUP_EN)) {
+ bar_64bit = false;
+ continue;
+ }
+
+ /* Skip next BARSETUP if current one has 64bit addressing */
+ bar_64bit = IS_FLD_SET(BARSETUP_TYPE, data, 64);
+
+ /* Skip configuration space mapping BARs */
+ if (data & IDT_BARSETUP_MODE_CFG)
+ continue;
+
+ /* Retrieve MW type/entries count and aperture size */
+ mw_type = GET_FIELD(BARSETUP_ATRAN, data);
+ en_cnt = idt_get_mw_count(mw_type);
+ aprt_size = (u64)1 << GET_FIELD(BARSETUP_SIZE, data);
+
+ /* Save configurations of all available memory windows */
+ for (widx = 0; widx < en_cnt; widx++, (*mw_cnt)++) {
+ /*
+ * IDT can expose a limited number of MWs, so it's bug
+ * to have more than the driver expects
+ */
+ if (*mw_cnt >= IDT_MAX_NR_MWS)
+ return ERR_PTR(-EINVAL);
+
+ /* Save basic MW info */
+ mws[*mw_cnt].type = mw_type;
+ mws[*mw_cnt].bar = bidx;
+ mws[*mw_cnt].idx = widx;
+ /* It's always DWORD aligned */
+ mws[*mw_cnt].addr_align = IDT_TRANS_ALIGN;
+ /* DIR and LUT approachs differently configure MWs */
+ if (mw_type == IDT_MW_DIR)
+ mws[*mw_cnt].size_max = aprt_size;
+ else if (mw_type == IDT_MW_LUT12)
+ mws[*mw_cnt].size_max = aprt_size / 16;
+ else
+ mws[*mw_cnt].size_max = aprt_size / 32;
+ mws[*mw_cnt].size_align = (mw_type == IDT_MW_DIR) ?
+ IDT_DIR_SIZE_ALIGN : mws[*mw_cnt].size_max;
+ }
+ }
+
+ /* Allocate memory for memory window descriptors */
+ ret_mws = devm_kcalloc(&ndev->ntb.pdev->dev, *mw_cnt,
+ sizeof(*ret_mws), GFP_KERNEL);
+ if (IS_ERR_OR_NULL(ret_mws))
+ return ERR_PTR(-ENOMEM);
+
+ /* Copy the info of detected memory windows */
+ memcpy(ret_mws, mws, (*mw_cnt)*sizeof(*ret_mws));
+
+ return ret_mws;
+}
+
+/*
+ * idt_init_mws() - initialize memory windows subsystem
+ * @ndev: IDT NTB hardware driver descriptor
+ *
+ * Scan BAR setup registers of local and peer ports to determine the
+ * outbound and inbound memory windows parameters
+ *
+ * Return: zero on success, otherwise a negative error number
+ */
+static int idt_init_mws(struct idt_ntb_dev *ndev)
+{
+ struct idt_ntb_peer *peer;
+ unsigned char pidx;
+
+ /* Scan memory windows of the local port */
+ ndev->mws = idt_scan_mws(ndev, ndev->port, &ndev->mw_cnt);
+ if (IS_ERR(ndev->mws)) {
+ dev_err(&ndev->ntb.pdev->dev,
+ "Failed to scan mws of local port %hhu", ndev->port);
+ return PTR_ERR(ndev->mws);
+ }
+
+ /* Scan memory windows of the peer ports */
+ for (pidx = 0; pidx < ndev->peer_cnt; pidx++) {
+ peer = &ndev->peers[pidx];
+ peer->mws = idt_scan_mws(ndev, peer->port, &peer->mw_cnt);
+ if (IS_ERR(peer->mws)) {
+ dev_err(&ndev->ntb.pdev->dev,
+ "Failed to scan mws of port %hhu", peer->port);
+ return PTR_ERR(peer->mws);
+ }
+ }
+
+ /* Initialize spin locker of the LUT registers */
+ spin_lock_init(&ndev->lut_lock);
+
+ dev_dbg(&ndev->ntb.pdev->dev, "Outbound and inbound MWs initialized");
+
+ return 0;
+}
+
+/*
+ * idt_ntb_mw_count() - number of inbound memory windows (NTB API callback)
+ * @ntb: NTB device context.
+ * @pidx: Port index of peer device.
+ *
+ * The value is returned for the specified peer, so generally speaking it can
+ * be different for different port depending on the IDT PCIe-switch
+ * initialization.
+ *
+ * Return: the number of memory windows.
+ */
+static int idt_ntb_mw_count(struct ntb_dev *ntb, int pidx)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ if (pidx < 0 || ndev->peer_cnt <= pidx)
+ return -EINVAL;
+
+ return ndev->peers[pidx].mw_cnt;
+}
+
+/*
+ * idt_ntb_mw_get_align() - inbound memory window parameters (NTB API callback)
+ * @ntb: NTB device context.
+ * @pidx: Port index of peer device.
+ * @widx: Memory window index.
+ * @addr_align: OUT - the base alignment for translating the memory window
+ * @size_align: OUT - the size alignment for translating the memory window
+ * @size_max: OUT - the maximum size of the memory window
+ *
+ * The peer memory window parameters have already been determined, so just
+ * return the corresponding values, which mustn't change within session.
+ *
+ * Return: Zero on success, otherwise a negative error number.
+ */
+static int idt_ntb_mw_get_align(struct ntb_dev *ntb, int pidx, int widx,
+ resource_size_t *addr_align,
+ resource_size_t *size_align,
+ resource_size_t *size_max)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+ struct idt_ntb_peer *peer;
+
+ if (pidx < 0 || ndev->peer_cnt <= pidx)
+ return -EINVAL;
+
+ peer = &ndev->peers[pidx];
+
+ if (widx < 0 || peer->mw_cnt <= widx)
+ return -EINVAL;
+
+ if (addr_align != NULL)
+ *addr_align = peer->mws[widx].addr_align;
+
+ if (size_align != NULL)
+ *size_align = peer->mws[widx].size_align;
+
+ if (size_max != NULL)
+ *size_max = peer->mws[widx].size_max;
+
+ return 0;
+}
+
+/*
+ * idt_ntb_peer_mw_count() - number of outbound memory windows
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ *
+ * Outbound memory windows parameters have been determined based on the
+ * BAR setup registers value, which are mostly constants within one session.
+ *
+ * Return: the number of memory windows.
+ */
+static int idt_ntb_peer_mw_count(struct ntb_dev *ntb)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ return ndev->mw_cnt;
+}
+
+/*
+ * idt_ntb_peer_mw_get_addr() - get map address of an outbound memory window
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ * @widx: Memory window index (within ntb_peer_mw_count() return value).
+ * @base: OUT - the base address of mapping region.
+ * @size: OUT - the size of mapping region.
+ *
+ * Return just parameters of BAR resources mapping. Size reflects just the size
+ * of the resource
+ *
+ * Return: Zero on success, otherwise a negative error number.
+ */
+static int idt_ntb_peer_mw_get_addr(struct ntb_dev *ntb, int widx,
+ phys_addr_t *base, resource_size_t *size)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ if (widx < 0 || ndev->mw_cnt <= widx)
+ return -EINVAL;
+
+ /* Mapping address is just properly shifted BAR resource start */
+ if (base != NULL)
+ *base = pci_resource_start(ntb->pdev, ndev->mws[widx].bar) +
+ ndev->mws[widx].idx * ndev->mws[widx].size_max;
+
+ /* Mapping size has already been calculated at MWs scanning */
+ if (size != NULL)
+ *size = ndev->mws[widx].size_max;
+
+ return 0;
+}
+
+/*
+ * idt_ntb_peer_mw_set_trans() - set a translation address of a memory window
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ * @pidx: Port index of peer device the translation address received from.
+ * @widx: Memory window index.
+ * @addr: The dma address of the shared memory to access.
+ * @size: The size of the shared memory to access.
+ *
+ * The Direct address translation and LUT base translation is initialized a
+ * bit differenet. Although the parameters restriction are now determined by
+ * the same code.
+ *
+ * Return: Zero on success, otherwise an error number.
+ */
+static int idt_ntb_peer_mw_set_trans(struct ntb_dev *ntb, int pidx, int widx,
+ u64 addr, resource_size_t size)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+ struct idt_mw_cfg *mw_cfg;
+ u32 data = 0, lutoff = 0;
+
+ if (pidx < 0 || ndev->peer_cnt <= pidx)
+ return -EINVAL;
+
+ if (widx < 0 || ndev->mw_cnt <= widx)
+ return -EINVAL;
+
+ /*
+ * Retrieve the memory window config to make sure the passed arguments
+ * fit it restrictions
+ */
+ mw_cfg = &ndev->mws[widx];
+ if (!IS_ALIGNED(addr, mw_cfg->addr_align))
+ return -EINVAL;
+ if (!IS_ALIGNED(size, mw_cfg->size_align) || size > mw_cfg->size_max)
+ return -EINVAL;
+
+ /* DIR and LUT based translations are initialized differently */
+ if (mw_cfg->type == IDT_MW_DIR) {
+ const struct idt_ntb_bar *bar = &ntdata_tbl.bars[mw_cfg->bar];
+ u64 limit;
+ /* Set destination partition of translation */
+ data = idt_nt_read(ndev, bar->setup);
+ data = SET_FIELD(BARSETUP_TPART, data, ndev->peers[pidx].part);
+ idt_nt_write(ndev, bar->setup, data);
+ /* Set translation base address */
+ idt_nt_write(ndev, bar->ltbase, (u32)addr);
+ idt_nt_write(ndev, bar->utbase, (u32)(addr >> 32));
+ /* Set the custom BAR aperture limit */
+ limit = pci_resource_start(ntb->pdev, mw_cfg->bar) + size;
+ idt_nt_write(ndev, bar->limit, (u32)limit);
+ if (IS_FLD_SET(BARSETUP_TYPE, data, 64))
+ idt_nt_write(ndev, (bar + 1)->limit, (limit >> 32));
+ } else {
+ unsigned long irqflags;
+ /* Initialize corresponding LUT entry */
+ lutoff = SET_FIELD(LUTOFFSET_INDEX, 0, mw_cfg->idx) |
+ SET_FIELD(LUTOFFSET_BAR, 0, mw_cfg->bar);
+ data = SET_FIELD(LUTUDATA_PART, 0, ndev->peers[pidx].part) |
+ IDT_LUTUDATA_VALID;
+ spin_lock_irqsave(&ndev->lut_lock, irqflags);
+ idt_nt_write(ndev, IDT_NT_LUTOFFSET, lutoff);
+ idt_nt_write(ndev, IDT_NT_LUTLDATA, (u32)addr);
+ idt_nt_write(ndev, IDT_NT_LUTMDATA, (u32)(addr >> 32));
+ idt_nt_write(ndev, IDT_NT_LUTUDATA, data);
+ spin_unlock_irqrestore(&ndev->lut_lock, irqflags);
+ /* Limit address isn't specified since size is fixed for LUT */
+ }
+
+ return 0;
+}
+
+/*
+ * idt_ntb_peer_mw_clear_trans() - clear the outbound MW translation address
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ * @pidx: Port index of peer device.
+ * @widx: Memory window index.
+ *
+ * It effectively disables the translation over the specified outbound MW.
+ *
+ * Return: Zero on success, otherwise an error number.
+ */
+static int idt_ntb_peer_mw_clear_trans(struct ntb_dev *ntb, int pidx,
+ int widx)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+ struct idt_mw_cfg *mw_cfg;
+
+ if (pidx < 0 || ndev->peer_cnt <= pidx)
+ return -EINVAL;
+
+ if (widx < 0 || ndev->mw_cnt <= widx)
+ return -EINVAL;
+
+ mw_cfg = &ndev->mws[widx];
+
+ /* DIR and LUT based translations are initialized differently */
+ if (mw_cfg->type == IDT_MW_DIR) {
+ const struct idt_ntb_bar *bar = &ntdata_tbl.bars[mw_cfg->bar];
+ u32 data;
+ /* Read BARSETUP to check BAR type */
+ data = idt_nt_read(ndev, bar->setup);
+ /* Disable translation by specifying zero BAR limit */
+ idt_nt_write(ndev, bar->limit, 0);
+ if (IS_FLD_SET(BARSETUP_TYPE, data, 64))
+ idt_nt_write(ndev, (bar + 1)->limit, 0);
+ } else {
+ unsigned long irqflags;
+ u32 lutoff;
+ /* Clear the corresponding LUT entry up */
+ lutoff = SET_FIELD(LUTOFFSET_INDEX, 0, mw_cfg->idx) |
+ SET_FIELD(LUTOFFSET_BAR, 0, mw_cfg->bar);
+ spin_lock_irqsave(&ndev->lut_lock, irqflags);
+ idt_nt_write(ndev, IDT_NT_LUTOFFSET, lutoff);
+ idt_nt_write(ndev, IDT_NT_LUTLDATA, 0);
+ idt_nt_write(ndev, IDT_NT_LUTMDATA, 0);
+ idt_nt_write(ndev, IDT_NT_LUTUDATA, 0);
+ spin_unlock_irqrestore(&ndev->lut_lock, irqflags);
+ }
+
+ return 0;
+}
+
+/*=============================================================================
+ * 5. Doorbell operations
+ *
+ * Doorbell functionality of IDT PCIe-switches is pretty unusual. First of
+ * all there is global doorbell register which state can by changed by any
+ * NT-function of the IDT device in accordance with global permissions. These
+ * permissions configs are not supported by NTB API, so it must be done by
+ * either BIOS or EEPROM settings. In the same way the state of the global
+ * doorbell is reflected to the NT-functions local inbound doorbell registers.
+ * It can lead to situations when client driver sets some peer doorbell bits
+ * and get them bounced back to local inbound doorbell if permissions are
+ * granted.
+ * Secondly there is just one IRQ vector for Doorbell, Message, Temperature
+ * and Switch events, so if client driver left any of Doorbell bits set and
+ * some other event occurred, the driver will be notified of Doorbell event
+ * again.
+ *=============================================================================
+ */
+
+/*
+ * idt_db_isr() - doorbell event ISR
+ * @ndev: IDT NTB hardware driver descriptor
+ * @ntint_sts: NT-function interrupt status
+ *
+ * Doorbell event happans when DBELL bit of NTINTSTS switches from 0 to 1.
+ * It happens only when unmasked doorbell bits are set to ones on completely
+ * zeroed doorbell register.
+ * The method is called from PCIe ISR bottom-half routine.
+ */
+static void idt_db_isr(struct idt_ntb_dev *ndev, u32 ntint_sts)
+{
+ /*
+ * Doorbell IRQ status will be cleaned only when client
+ * driver unsets all the doorbell bits.
+ */
+ dev_dbg(&ndev->ntb.pdev->dev, "DB IRQ detected %#08x", ntint_sts);
+
+ /* Notify the client driver of possible doorbell state change */
+ ntb_db_event(&ndev->ntb, 0);
+}
+
+/*
+ * idt_ntb_db_valid_mask() - get a mask of doorbell bits supported by the ntb
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ *
+ * IDT PCIe-switches expose just one Doorbell register of DWORD size.
+ *
+ * Return: A mask of doorbell bits supported by the ntb.
+ */
+static u64 idt_ntb_db_valid_mask(struct ntb_dev *ntb)
+{
+ return IDT_DBELL_MASK;
+}
+
+/*
+ * idt_ntb_db_read() - read the local doorbell register (NTB API callback)
+ * @ntb: NTB device context.
+ *
+ * There is just on inbound doorbell register of each NT-function, so
+ * this method return it value.
+ *
+ * Return: The bits currently set in the local doorbell register.
+ */
+static u64 idt_ntb_db_read(struct ntb_dev *ntb)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ return idt_nt_read(ndev, IDT_NT_INDBELLSTS);
+}
+
+/*
+ * idt_ntb_db_clear() - clear bits in the local doorbell register
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ * @db_bits: Doorbell bits to clear.
+ *
+ * Clear bits of inbound doorbell register by writing ones to it.
+ *
+ * NOTE! Invalid bits are always considered cleared so it's not an error
+ * to clear them over.
+ *
+ * Return: always zero as success.
+ */
+static int idt_ntb_db_clear(struct ntb_dev *ntb, u64 db_bits)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ idt_nt_write(ndev, IDT_NT_INDBELLSTS, (u32)db_bits);
+
+ return 0;
+}
+
+/*
+ * idt_ntb_db_read_mask() - read the local doorbell mask (NTB API callback)
+ * @ntb: NTB device context.
+ *
+ * Each inbound doorbell bit can be masked from generating IRQ by setting
+ * the corresponding bit in inbound doorbell mask. So this method returns
+ * the value of the register.
+ *
+ * Return: The bits currently set in the local doorbell mask register.
+ */
+static u64 idt_ntb_db_read_mask(struct ntb_dev *ntb)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ return idt_nt_read(ndev, IDT_NT_INDBELLMSK);
+}
+
+/*
+ * idt_ntb_db_set_mask() - set bits in the local doorbell mask
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ * @db_bits: Doorbell mask bits to set.
+ *
+ * The inbound doorbell register mask value must be read, then OR'ed with
+ * passed field and only then set back.
+ *
+ * Return: zero on success, negative error if invalid argument passed.
+ */
+static int idt_ntb_db_set_mask(struct ntb_dev *ntb, u64 db_bits)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ return idt_reg_set_bits(ndev, IDT_NT_INDBELLMSK, &ndev->db_mask_lock,
+ IDT_DBELL_MASK, db_bits);
+}
+
+/*
+ * idt_ntb_db_clear_mask() - clear bits in the local doorbell mask
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ * @db_bits: Doorbell bits to clear.
+ *
+ * The method just clears the set bits up in accordance with the passed
+ * bitfield. IDT PCIe-switch shall generate an interrupt if there hasn't
+ * been any unmasked bit set before current unmasking. Otherwise IRQ won't
+ * be generated since there is only one IRQ vector for all doorbells.
+ *
+ * Return: always zero as success
+ */
+static int idt_ntb_db_clear_mask(struct ntb_dev *ntb, u64 db_bits)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ idt_reg_clear_bits(ndev, IDT_NT_INDBELLMSK, &ndev->db_mask_lock,
+ db_bits);
+
+ return 0;
+}
+
+/*
+ * idt_ntb_peer_db_set() - set bits in the peer doorbell register
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ * @db_bits: Doorbell bits to set.
+ *
+ * IDT PCIe-switches exposes local outbound doorbell register to change peer
+ * inbound doorbell register state.
+ *
+ * Return: zero on success, negative error if invalid argument passed.
+ */
+static int idt_ntb_peer_db_set(struct ntb_dev *ntb, u64 db_bits)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ if (db_bits & ~(u64)IDT_DBELL_MASK)
+ return -EINVAL;
+
+ idt_nt_write(ndev, IDT_NT_OUTDBELLSET, (u32)db_bits);
+ return 0;
+}
+
+/*=============================================================================
+ * 6. Messaging operations
+ *
+ * Each NT-function of IDT PCIe-switch has four inbound and four outbound
+ * message registers. Each outbound message register can be connected to one or
+ * even more than one peer inbound message registers by setting global
+ * configurations. Since NTB API permits one-on-one message registers mapping
+ * only, the driver acts in according with that restriction.
+ *=============================================================================
+ */
+
+/*
+ * idt_init_msg() - initialize messaging interface
+ * @ndev: IDT NTB hardware driver descriptor
+ *
+ * Just initialize the message registers routing tables locker.
+ */
+static void idt_init_msg(struct idt_ntb_dev *ndev)
+{
+ unsigned char midx;
+
+ /* Init the messages routing table lockers */
+ for (midx = 0; midx < IDT_MSG_CNT; midx++)
+ spin_lock_init(&ndev->msg_locks[midx]);
+
+ dev_dbg(&ndev->ntb.pdev->dev, "NTB Messaging initialized");
+}
+
+/*
+ * idt_msg_isr() - message event ISR
+ * @ndev: IDT NTB hardware driver descriptor
+ * @ntint_sts: NT-function interrupt status
+ *
+ * Message event happens when MSG bit of NTINTSTS switches from 0 to 1.
+ * It happens only when unmasked message status bits are set to ones on
+ * completely zeroed message status register.
+ * The method is called from PCIe ISR bottom-half routine.
+ */
+static void idt_msg_isr(struct idt_ntb_dev *ndev, u32 ntint_sts)
+{
+ /*
+ * Message IRQ status will be cleaned only when client
+ * driver unsets all the message status bits.
+ */
+ dev_dbg(&ndev->ntb.pdev->dev, "Message IRQ detected %#08x", ntint_sts);
+
+ /* Notify the client driver of possible message status change */
+ ntb_msg_event(&ndev->ntb);
+}
+
+/*
+ * idt_ntb_msg_count() - get the number of message registers (NTB API callback)
+ * @ntb: NTB device context.
+ *
+ * IDT PCIe-switches support four message registers.
+ *
+ * Return: the number of message registers.
+ */
+static int idt_ntb_msg_count(struct ntb_dev *ntb)
+{
+ return IDT_MSG_CNT;
+}
+
+/*
+ * idt_ntb_msg_inbits() - get a bitfield of inbound message registers status
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ *
+ * NT message status register is shared between inbound and outbound message
+ * registers status
+ *
+ * Return: bitfield of inbound message registers.
+ */
+static u64 idt_ntb_msg_inbits(struct ntb_dev *ntb)
+{
+ return (u64)IDT_INMSG_MASK;
+}
+
+/*
+ * idt_ntb_msg_outbits() - get a bitfield of outbound message registers status
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ *
+ * NT message status register is shared between inbound and outbound message
+ * registers status
+ *
+ * Return: bitfield of outbound message registers.
+ */
+static u64 idt_ntb_msg_outbits(struct ntb_dev *ntb)
+{
+ return (u64)IDT_OUTMSG_MASK;
+}
+
+/*
+ * idt_ntb_msg_read_sts() - read the message registers status (NTB API callback)
+ * @ntb: NTB device context.
+ *
+ * IDT PCIe-switches expose message status registers to notify drivers of
+ * incoming data and failures in case if peer message register isn't freed.
+ *
+ * Return: status bits of message registers
+ */
+static u64 idt_ntb_msg_read_sts(struct ntb_dev *ntb)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ return idt_nt_read(ndev, IDT_NT_MSGSTS);
+}
+
+/*
+ * idt_ntb_msg_clear_sts() - clear status bits of message registers
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ * @sts_bits: Status bits to clear.
+ *
+ * Clear bits in the status register by writing ones.
+ *
+ * NOTE! Invalid bits are always considered cleared so it's not an error
+ * to clear them over.
+ *
+ * Return: always zero as success.
+ */
+static int idt_ntb_msg_clear_sts(struct ntb_dev *ntb, u64 sts_bits)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ idt_nt_write(ndev, IDT_NT_MSGSTS, sts_bits);
+
+ return 0;
+}
+
+/*
+ * idt_ntb_msg_set_mask() - set mask of message register status bits
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ * @mask_bits: Mask bits.
+ *
+ * Mask the message status bits from raising an IRQ.
+ *
+ * Return: zero on success, negative error if invalid argument passed.
+ */
+static int idt_ntb_msg_set_mask(struct ntb_dev *ntb, u64 mask_bits)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ return idt_reg_set_bits(ndev, IDT_NT_MSGSTSMSK, &ndev->msg_mask_lock,
+ IDT_MSG_MASK, mask_bits);
+}
+
+/*
+ * idt_ntb_msg_clear_mask() - clear message registers mask
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ * @mask_bits: Mask bits.
+ *
+ * Clear mask of message status bits IRQs.
+ *
+ * Return: always zero as success.
+ */
+static int idt_ntb_msg_clear_mask(struct ntb_dev *ntb, u64 mask_bits)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ idt_reg_clear_bits(ndev, IDT_NT_MSGSTSMSK, &ndev->msg_mask_lock,
+ mask_bits);
+
+ return 0;
+}
+
+/*
+ * idt_ntb_msg_read() - read message register with specified index
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ * @midx: Message register index
+ * @pidx: OUT - Port index of peer device a message retrieved from
+ * @msg: OUT - Data
+ *
+ * Read data from the specified message register and source register.
+ *
+ * Return: zero on success, negative error if invalid argument passed.
+ */
+static int idt_ntb_msg_read(struct ntb_dev *ntb, int midx, int *pidx, u32 *msg)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+
+ if (midx < 0 || IDT_MSG_CNT <= midx)
+ return -EINVAL;
+
+ /* Retrieve source port index of the message */
+ if (pidx != NULL) {
+ u32 srcpart;
+
+ srcpart = idt_nt_read(ndev, ntdata_tbl.msgs[midx].src);
+ *pidx = ndev->part_idx_map[srcpart];
+ }
+
+ /* Retrieve data of the corresponding message register */
+ if (msg != NULL)
+ *msg = idt_nt_read(ndev, ntdata_tbl.msgs[midx].in);
+
+ return 0;
+}
+
+/*
+ * idt_ntb_msg_write() - write data to the specified message register
+ * (NTB API callback)
+ * @ntb: NTB device context.
+ * @midx: Message register index
+ * @pidx: Port index of peer device a message being sent to
+ * @msg: Data to send
+ *
+ * Just try to send data to a peer. Message status register should be
+ * checked by client driver.
+ *
+ * Return: zero on success, negative error if invalid argument passed.
+ */
+static int idt_ntb_msg_write(struct ntb_dev *ntb, int midx, int pidx, u32 msg)
+{
+ struct idt_ntb_dev *ndev = to_ndev_ntb(ntb);
+ unsigned long irqflags;
+ u32 swpmsgctl = 0;
+
+ if (midx < 0 || IDT_MSG_CNT <= midx)
+ return -EINVAL;
+
+ if (pidx < 0 || ndev->peer_cnt <= pidx)
+ return -EINVAL;
+
+ /* Collect the routing information */
+ swpmsgctl = SET_FIELD(SWPxMSGCTL_REG, 0, midx) |
+ SET_FIELD(SWPxMSGCTL_PART, 0, ndev->peers[pidx].part);
+
+ /* Lock the messages routing table of the specified register */
+ spin_lock_irqsave(&ndev->msg_locks[midx], irqflags);
+ /* Set the route and send the data */
+ idt_sw_write(ndev, partdata_tbl[ndev->part].msgctl[midx], swpmsgctl);
+ idt_nt_write(ndev, ntdata_tbl.msgs[midx].out, msg);
+ /* Unlock the messages routing table */
+ spin_unlock_irqrestore(&ndev->msg_locks[midx], irqflags);
+
+ /* Client driver shall check the status register */
+ return 0;
+}
+
+/*=============================================================================
+ * 7. Temperature sensor operations
+ *
+ * IDT PCIe-switch has an embedded temperature sensor, which can be used to
+ * warn a user-space of possible chip overheating. Since workload temperature
+ * can be different on different platforms, temperature thresholds as well as
+ * general sensor settings must be setup in the framework of BIOS/EEPROM
+ * initializations. It includes the actual sensor enabling as well.
+ *=============================================================================
+ */
+
+/*
+ * idt_read_temp() - read temperature from chip sensor
+ * @ntb: NTB device context.
+ * @val: OUT - integer value of temperature
+ * @frac: OUT - fraction
+ */
+static void idt_read_temp(struct idt_ntb_dev *ndev, unsigned char *val,
+ unsigned char *frac)
+{
+ u32 data;
+
+ /* Read the data from TEMP field of the TMPSTS register */
+ data = idt_sw_read(ndev, IDT_SW_TMPSTS);
+ data = GET_FIELD(TMPSTS_TEMP, data);
+ /* TEMP field has one fractional bit and seven integer bits */
+ *val = data >> 1;
+ *frac = ((data & 0x1) ? 5 : 0);
+}
+
+/*
+ * idt_temp_isr() - temperature sensor alarm events ISR
+ * @ndev: IDT NTB hardware driver descriptor
+ * @ntint_sts: NT-function interrupt status
+ *
+ * It handles events of temperature crossing alarm thresholds. Since reading
+ * of TMPALARM register clears it up, the function doesn't analyze the
+ * read value, instead the current temperature value just warningly printed to
+ * log.
+ * The method is called from PCIe ISR bottom-half routine.
+ */
+static void idt_temp_isr(struct idt_ntb_dev *ndev, u32 ntint_sts)
+{
+ unsigned char val, frac;
+
+ /* Read the current temperature value */
+ idt_read_temp(ndev, &val, &frac);
+
+ /* Read the temperature alarm to clean the alarm status out */
+ /*(void)idt_sw_read(ndev, IDT_SW_TMPALARM);*/
+
+ /* Clean the corresponding interrupt bit */
+ idt_nt_write(ndev, IDT_NT_NTINTSTS, IDT_NTINTSTS_TMPSENSOR);
+
+ dev_dbg(&ndev->ntb.pdev->dev,
+ "Temp sensor IRQ detected %#08x", ntint_sts);
+
+ /* Print temperature value to log */
+ dev_warn(&ndev->ntb.pdev->dev, "Temperature %hhu.%hhu", val, frac);
+}
+
+/*=============================================================================
+ * 8. ISRs related operations
+ *
+ * IDT PCIe-switch has strangely developed IRQ system. There is just one
+ * interrupt vector for doorbell and message registers. So the hardware driver
+ * can't determine actual source of IRQ if, for example, message event happened
+ * while any of unmasked doorbell is still set. The similar situation may be if
+ * switch or temperature sensor events pop up. The difference is that SEVENT
+ * and TMPSENSOR bits of NT interrupt status register can be cleaned by
+ * IRQ handler so a next interrupt request won't have false handling of
+ * corresponding events.
+ * The hardware driver has only bottom-half handler of the IRQ, since if any
+ * of events happened the device won't raise it again before the last one is
+ * handled by clearing of corresponding NTINTSTS bit.
+ *=============================================================================
+ */
+
+static irqreturn_t idt_thread_isr(int irq, void *devid);
+
+/*
+ * idt_init_isr() - initialize PCIe interrupt handler
+ * @ndev: IDT NTB hardware driver descriptor
+ *
+ * Return: zero on success, otherwise a negative error number.
+ */
+static int idt_init_isr(struct idt_ntb_dev *ndev)
+{
+ struct pci_dev *pdev = ndev->ntb.pdev;
+ u32 ntint_mask;
+ int ret;
+
+ /* Allocate just one interrupt vector for the ISR */
+ ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI | PCI_IRQ_LEGACY);
+ if (ret != 1) {
+ dev_err(&pdev->dev, "Failed to allocate IRQ vector");
+ return ret;
+ }
+
+ /* Retrieve the IRQ vector */
+ ret = pci_irq_vector(pdev, 0);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to get IRQ vector");
+ goto err_free_vectors;
+ }
+
+ /* Set the IRQ handler */
+ ret = devm_request_threaded_irq(&pdev->dev, ret, NULL, idt_thread_isr,
+ IRQF_ONESHOT, NTB_IRQNAME, ndev);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to set MSI IRQ handler, %d", ret);
+ goto err_free_vectors;
+ }
+
+ /* Unmask Message/Doorbell/SE/Temperature interrupts */
+ ntint_mask = idt_nt_read(ndev, IDT_NT_NTINTMSK) & ~IDT_NTINTMSK_ALL;
+ idt_nt_write(ndev, IDT_NT_NTINTMSK, ntint_mask);
+
+ /* From now on the interrupts are enabled */
+ dev_dbg(&pdev->dev, "NTB interrupts initialized");
+
+ return 0;
+
+err_free_vectors:
+ pci_free_irq_vectors(pdev);
+
+ return ret;
+}
+
+
+/*
+ * idt_deinit_ist() - deinitialize PCIe interrupt handler
+ * @ndev: IDT NTB hardware driver descriptor
+ *
+ * Disable corresponding interrupts and free allocated IRQ vectors.
+ */
+static void idt_deinit_isr(struct idt_ntb_dev *ndev)
+{
+ struct pci_dev *pdev = ndev->ntb.pdev;
+ u32 ntint_mask;
+
+ /* Mask interrupts back */
+ ntint_mask = idt_nt_read(ndev, IDT_NT_NTINTMSK) | IDT_NTINTMSK_ALL;
+ idt_nt_write(ndev, IDT_NT_NTINTMSK, ntint_mask);
+
+ /* Free allocated IRQ vectors */
+ pci_free_irq_vectors(pdev);
+
+ dev_dbg(&pdev->dev, "NTB interrupts deinitialized");
+}
+
+/*
+ * idt_thread_isr() - NT function interrupts handler
+ * @irq: IRQ number
+ * @devid: Custom buffer
+ *
+ * It reads current NT interrupts state register and handles all the event
+ * it declares.
+ * The method is bottom-half routine of actual default PCIe IRQ handler.
+ */
+static irqreturn_t idt_thread_isr(int irq, void *devid)
+{
+ struct idt_ntb_dev *ndev = devid;
+ bool handled = false;
+ u32 ntint_sts;
+
+ /* Read the NT interrupts status register */
+ ntint_sts = idt_nt_read(ndev, IDT_NT_NTINTSTS);
+
+ /* Handle messaging interrupts */
+ if (ntint_sts & IDT_NTINTSTS_MSG) {
+ idt_msg_isr(ndev, ntint_sts);
+ handled = true;
+ }
+
+ /* Handle doorbell interrupts */
+ if (ntint_sts & IDT_NTINTSTS_DBELL) {
+ idt_db_isr(ndev, ntint_sts);
+ handled = true;
+ }
+
+ /* Handle switch event interrupts */
+ if (ntint_sts & IDT_NTINTSTS_SEVENT) {
+ idt_se_isr(ndev, ntint_sts);
+ handled = true;
+ }
+
+ /* Handle temperature sensor interrupt */
+ if (ntint_sts & IDT_NTINTSTS_TMPSENSOR) {
+ idt_temp_isr(ndev, ntint_sts);
+ handled = true;
+ }
+
+ dev_dbg(&ndev->ntb.pdev->dev, "IDT IRQs 0x%08x handled", ntint_sts);
+
+ return handled ? IRQ_HANDLED : IRQ_NONE;
+}
+
+/*===========================================================================
+ * 9. NTB hardware driver initialization
+ *===========================================================================
+ */
+
+/*
+ * NTB API operations
+ */
+static const struct ntb_dev_ops idt_ntb_ops = {
+ .port_number = idt_ntb_port_number,
+ .peer_port_count = idt_ntb_peer_port_count,
+ .peer_port_number = idt_ntb_peer_port_number,
+ .peer_port_idx = idt_ntb_peer_port_idx,
+ .link_is_up = idt_ntb_link_is_up,
+ .link_enable = idt_ntb_link_enable,
+ .link_disable = idt_ntb_link_disable,
+ .mw_count = idt_ntb_mw_count,
+ .mw_get_align = idt_ntb_mw_get_align,
+ .peer_mw_count = idt_ntb_peer_mw_count,
+ .peer_mw_get_addr = idt_ntb_peer_mw_get_addr,
+ .peer_mw_set_trans = idt_ntb_peer_mw_set_trans,
+ .peer_mw_clear_trans = idt_ntb_peer_mw_clear_trans,
+ .db_valid_mask = idt_ntb_db_valid_mask,
+ .db_read = idt_ntb_db_read,
+ .db_clear = idt_ntb_db_clear,
+ .db_read_mask = idt_ntb_db_read_mask,
+ .db_set_mask = idt_ntb_db_set_mask,
+ .db_clear_mask = idt_ntb_db_clear_mask,
+ .peer_db_set = idt_ntb_peer_db_set,
+ .msg_count = idt_ntb_msg_count,
+ .msg_inbits = idt_ntb_msg_inbits,
+ .msg_outbits = idt_ntb_msg_outbits,
+ .msg_read_sts = idt_ntb_msg_read_sts,
+ .msg_clear_sts = idt_ntb_msg_clear_sts,
+ .msg_set_mask = idt_ntb_msg_set_mask,
+ .msg_clear_mask = idt_ntb_msg_clear_mask,
+ .msg_read = idt_ntb_msg_read,
+ .msg_write = idt_ntb_msg_write
+};
+
+/*
+ * idt_register_device() - register IDT NTB device
+ * @ndev: IDT NTB hardware driver descriptor
+ *
+ * Return: zero on success, otherwise a negative error number.
+ */
+static int idt_register_device(struct idt_ntb_dev *ndev)
+{
+ int ret;
+
+ /* Initialize the rest of NTB device structure and register it */
+ ndev->ntb.ops = &idt_ntb_ops;
+ ndev->ntb.topo = NTB_TOPO_PRI;
+
+ ret = ntb_register_device(&ndev->ntb);
+ if (ret != 0) {
+ dev_err(&ndev->ntb.pdev->dev, "Failed to register NTB device");
+ return ret;
+ }
+
+ dev_dbg(&ndev->ntb.pdev->dev, "NTB device successfully registered");
+
+ return 0;
+}
+
+/*
+ * idt_unregister_device() - unregister IDT NTB device
+ * @ndev: IDT NTB hardware driver descriptor
+ */
+static void idt_unregister_device(struct idt_ntb_dev *ndev)
+{
+ /* Just unregister the NTB device */
+ ntb_unregister_device(&ndev->ntb);
+
+ dev_dbg(&ndev->ntb.pdev->dev, "NTB device unregistered");
+}
+
+/*=============================================================================
+ * 10. DebugFS node initialization
+ *=============================================================================
+ */
+
+static ssize_t idt_dbgfs_info_read(struct file *filp, char __user *ubuf,
+ size_t count, loff_t *offp);
+
+/*
+ * Driver DebugFS info file operations
+ */
+static const struct file_operations idt_dbgfs_info_ops = {
+ .owner = THIS_MODULE,
+ .open = simple_open,
+ .read = idt_dbgfs_info_read
+};
+
+/*
+ * idt_dbgfs_info_read() - DebugFS read info node callback
+ * @file: File node descriptor.
+ * @ubuf: User-space buffer to put data to
+ * @count: Size of the buffer
+ * @offp: Offset within the buffer
+ */
+static ssize_t idt_dbgfs_info_read(struct file *filp, char __user *ubuf,
+ size_t count, loff_t *offp)
+{
+ struct idt_ntb_dev *ndev = filp->private_data;
+ enum ntb_speed speed;
+ enum ntb_width width;
+ char *strbuf;
+ size_t size;
+ ssize_t ret = 0, off = 0;
+ unsigned char temp, frac, idx;
+ u32 data;
+
+ /* Lets limit the buffer size the way the Intel/AMD drivers do */
+ size = min_t(size_t, count, 0x500U);
+
+ /* Allocate the memory for the buffer */
+ strbuf = kmalloc(size, GFP_KERNEL);
+ if (strbuf == NULL)
+ return -ENOMEM;
+
+ /* Put the data into the string buffer */
+ off += scnprintf(strbuf + off, size - off,
+ "\n\t\tIDT NTB device Information:\n\n");
+
+ /* General device configurations */
+ off += scnprintf(strbuf + off, size - off,
+ "Switch port\t\t\t- %hhu\n", ndev->port);
+ off += scnprintf(strbuf + off, size - off,
+ "Port partition\t\t\t- %hhu\n", ndev->part);
+ off += scnprintf(strbuf + off, size - off,
+ "Peers Port:Partition\t\t- ");
+ for (idx = 0; idx < ndev->peer_cnt; idx++) {
+ off += scnprintf(strbuf + off, size - off, "p%hhu:%hhu ",
+ ndev->peers[idx].port, ndev->peers[idx].part);
+ }
+ off += scnprintf(strbuf + off, size - off, "\n");
+
+ /* Links status */
+ data = idt_ntb_link_is_up(&ndev->ntb, &speed, &width);
+ off += scnprintf(strbuf + off, size - off,
+ "NTB link status\t\t\t- 0x%08x, ", data);
+ off += scnprintf(strbuf + off, size - off, "PCIe Gen %d ",
+ speed);
+ off += scnprintf(strbuf + off, size - off, "x%d lanes\n",
+ width);
+
+ /* Memory windows information */
+ off += scnprintf(strbuf + off, size - off,
+ "Outbound MWs count\t\t- %u\n", ndev->mw_cnt);
+ off += scnprintf(strbuf + off, size - off,
+ "Inbound MWs count\t\t- ");
+ for (idx = 0; idx < ndev->peer_cnt; idx++) {
+ off += scnprintf(strbuf + off, size - off, "p%hhu:%hhu ",
+ ndev->peers[idx].port, ndev->peers[idx].mw_cnt);
+ }
+ off += scnprintf(strbuf + off, size - off, "\n");
+
+ /* Doorbell information */
+ data = idt_ntb_db_read(&ndev->ntb);
+ off += scnprintf(strbuf + off, size - off,
+ "Doorbell register state\t\t- 0x%08x\n", data);
+ data = idt_nt_read(ndev, IDT_NT_INDBELLMSK);
+ off += scnprintf(strbuf + off, size - off,
+ "Doorbell mask state\t\t- 0x%08x\n", data);
+
+ /* Messaging information */
+ data = idt_ntb_msg_read_sts(&ndev->ntb);
+ off += scnprintf(strbuf + off, size - off,
+ "Message registers status\t- 0x%08x\n", data);
+ off += scnprintf(strbuf + off, size - off,
+ "Message data\t\t\t- ");
+ for (idx = 0; idx < IDT_MSG_CNT; idx++) {
+ int src;
+ (void)idt_ntb_msg_read(&ndev->ntb, idx, &src, &data);
+ off += scnprintf(strbuf + off, size - off,
+ "m%hhu:0x%08x<-%hhu ",
+ idx, data, ndev->peers[src].port);
+ }
+ off += scnprintf(strbuf + off, size - off, "\n");
+
+ /* Current temperature */
+ idt_read_temp(ndev, &temp, &frac);
+ off += scnprintf(strbuf + off, size - off,
+ "Switch temperature\t\t- %hhu.%hhuC\n", temp, frac);
+
+ /* Copy the buffer to the User Space */
+ ret = simple_read_from_buffer(ubuf, count, offp, strbuf, off);
+ kfree(strbuf);
+
+ return ret;
+}
+
+/*
+ * idt_init_dbgfs() - initialize DebugFS node
+ * @ndev: IDT NTB hardware driver descriptor
+ *
+ * Return: zero on success, otherwise a negative error number.
+ */
+static int idt_init_dbgfs(struct idt_ntb_dev *ndev)
+{
+ char devname[64];
+
+ /* If the top directory is not created then do nothing */
+ if (IS_ERR_OR_NULL(dbgfs_topdir)) {
+ dev_info(&ndev->ntb.pdev->dev, "Top DebugFS directory absent");
+ return PTR_ERR(dbgfs_topdir);
+ }
+
+ /* Create the info file node */
+ snprintf(devname, 64, "info:%s", pci_name(ndev->ntb.pdev));
+ ndev->dbgfs_info = debugfs_create_file(devname, 0400, dbgfs_topdir,
+ ndev, &idt_dbgfs_info_ops);
+ if (IS_ERR(ndev->dbgfs_info)) {
+ dev_dbg(&ndev->ntb.pdev->dev, "Failed to create DebugFS node");
+ return PTR_ERR(ndev->dbgfs_info);
+ }
+
+ dev_dbg(&ndev->ntb.pdev->dev, "NTB device DebugFS node created");
+
+ return 0;
+}
+
+/*
+ * idt_deinit_dbgfs() - deinitialize DebugFS node
+ * @ndev: IDT NTB hardware driver descriptor
+ *
+ * Just discard the info node from DebugFS
+ */
+static void idt_deinit_dbgfs(struct idt_ntb_dev *ndev)
+{
+ debugfs_remove(ndev->dbgfs_info);
+
+ dev_dbg(&ndev->ntb.pdev->dev, "NTB device DebugFS node discarded");
+}
+
+/*=============================================================================
+ * 11. Basic PCIe device initialization
+ *=============================================================================
+ */
+
+/*
+ * idt_check_setup() - Check whether the IDT PCIe-swtich is properly
+ * pre-initialized
+ * @pdev: Pointer to the PCI device descriptor
+ *
+ * Return: zero on success, otherwise a negative error number.
+ */
+static int idt_check_setup(struct pci_dev *pdev)
+{
+ u32 data;
+ int ret;
+
+ /* Read the BARSETUP0 */
+ ret = pci_read_config_dword(pdev, IDT_NT_BARSETUP0, &data);
+ if (ret != 0) {
+ dev_err(&pdev->dev,
+ "Failed to read BARSETUP0 config register");
+ return ret;
+ }
+
+ /* Check whether the BAR0 register is enabled to be of config space */
+ if (!(data & IDT_BARSETUP_EN) || !(data & IDT_BARSETUP_MODE_CFG)) {
+ dev_err(&pdev->dev, "BAR0 doesn't map config space");
+ return -EINVAL;
+ }
+
+ /* Configuration space BAR0 must have certain size */
+ if ((data & IDT_BARSETUP_SIZE_MASK) != IDT_BARSETUP_SIZE_CFG) {
+ dev_err(&pdev->dev, "Invalid size of config space");
+ return -EINVAL;
+ }
+
+ dev_dbg(&pdev->dev, "NTB device pre-initialized correctly");
+
+ return 0;
+}
+
+/*
+ * Create the IDT PCIe-switch driver descriptor
+ * @pdev: Pointer to the PCI device descriptor
+ * @id: IDT PCIe-device configuration
+ *
+ * It just allocates a memory for IDT PCIe-switch device structure and
+ * initializes some commonly used fields.
+ *
+ * No need of release method, since managed device resource is used for
+ * memory allocation.
+ *
+ * Return: pointer to the descriptor, otherwise a negative error number.
+ */
+static struct idt_ntb_dev *idt_create_dev(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct idt_ntb_dev *ndev;
+
+ /* Allocate memory for the IDT PCIe-device descriptor */
+ ndev = devm_kzalloc(&pdev->dev, sizeof(*ndev), GFP_KERNEL);
+ if (IS_ERR_OR_NULL(ndev)) {
+ dev_err(&pdev->dev, "Memory allocation failed for descriptor");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /* Save the IDT PCIe-switch ports configuration */
+ ndev->swcfg = (struct idt_89hpes_cfg *)id->driver_data;
+ /* Save the PCI-device pointer inside the NTB device structure */
+ ndev->ntb.pdev = pdev;
+
+ /* Initialize spin locker of Doorbell, Message and GASA registers */
+ spin_lock_init(&ndev->db_mask_lock);
+ spin_lock_init(&ndev->msg_mask_lock);
+ spin_lock_init(&ndev->gasa_lock);
+
+ dev_info(&pdev->dev, "IDT %s discovered", ndev->swcfg->name);
+
+ dev_dbg(&pdev->dev, "NTB device descriptor created");
+
+ return ndev;
+}
+
+/*
+ * idt_init_pci() - initialize the basic PCI-related subsystem
+ * @ndev: Pointer to the IDT PCIe-switch driver descriptor
+ *
+ * Managed device resources will be freed automatically in case of failure or
+ * driver detachment.
+ *
+ * Return: zero on success, otherwise negative error number.
+ */
+static int idt_init_pci(struct idt_ntb_dev *ndev)
+{
+ struct pci_dev *pdev = ndev->ntb.pdev;
+ int ret;
+
+ /* Initialize the bit mask of DMA */
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (ret != 0) {
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to set DMA bit mask\n");
+ return ret;
+ }
+ dev_warn(&pdev->dev, "Cannot set DMA highmem bit mask\n");
+ }
+ ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (ret != 0) {
+ ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (ret != 0) {
+ dev_err(&pdev->dev,
+ "Failed to set consistent DMA bit mask\n");
+ return ret;
+ }
+ dev_warn(&pdev->dev,
+ "Cannot set consistent DMA highmem bit mask\n");
+ }
+
+ /*
+ * Enable the device advanced error reporting. It's not critical to
+ * have AER disabled in the kernel.
+ */
+ ret = pci_enable_pcie_error_reporting(pdev);
+ if (ret != 0)
+ dev_warn(&pdev->dev, "PCIe AER capability disabled\n");
+ else /* Cleanup uncorrectable error status before getting to init */
+ pci_cleanup_aer_uncorrect_error_status(pdev);
+
+ /* First enable the PCI device */
+ ret = pcim_enable_device(pdev);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to enable PCIe device\n");
+ goto err_disable_aer;
+ }
+
+ /*
+ * Enable the bus mastering, which effectively enables MSI IRQs and
+ * Request TLPs translation
+ */
+ pci_set_master(pdev);
+
+ /* Request all BARs resources and map BAR0 only */
+ ret = pcim_iomap_regions_request_all(pdev, 1, NTB_NAME);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to request resources\n");
+ goto err_clear_master;
+ }
+
+ /* Retrieve virtual address of BAR0 - PCI configuration space */
+ ndev->cfgspc = pcim_iomap_table(pdev)[0];
+
+ /* Put the IDT driver data pointer to the PCI-device private pointer */
+ pci_set_drvdata(pdev, ndev);
+
+ dev_dbg(&pdev->dev, "NT-function PCIe interface initialized");
+
+ return 0;
+
+err_clear_master:
+ pci_clear_master(pdev);
+err_disable_aer:
+ (void)pci_disable_pcie_error_reporting(pdev);
+
+ return ret;
+}
+
+/*
+ * idt_deinit_pci() - deinitialize the basic PCI-related subsystem
+ * @ndev: Pointer to the IDT PCIe-switch driver descriptor
+ *
+ * Managed resources will be freed on the driver detachment
+ */
+static void idt_deinit_pci(struct idt_ntb_dev *ndev)
+{
+ struct pci_dev *pdev = ndev->ntb.pdev;
+
+ /* Clean up the PCI-device private data pointer */
+ pci_set_drvdata(pdev, NULL);
+
+ /* Clear the bus master disabling the Request TLPs translation */
+ pci_clear_master(pdev);
+
+ /* Disable the AER capability */
+ (void)pci_disable_pcie_error_reporting(pdev);
+
+ dev_dbg(&pdev->dev, "NT-function PCIe interface cleared");
+}
+
+/*===========================================================================
+ * 12. PCI bus callback functions
+ *===========================================================================
+ */
+
+/*
+ * idt_pci_probe() - PCI device probe callback
+ * @pdev: Pointer to PCI device structure
+ * @id: PCIe device custom descriptor
+ *
+ * Return: zero on success, otherwise negative error number
+ */
+static int idt_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct idt_ntb_dev *ndev;
+ int ret;
+
+ /* Check whether IDT PCIe-switch is properly pre-initialized */
+ ret = idt_check_setup(pdev);
+ if (ret != 0)
+ return ret;
+
+ /* Allocate the memory for IDT NTB device data */
+ ndev = idt_create_dev(pdev, id);
+ if (IS_ERR_OR_NULL(ndev))
+ return PTR_ERR(ndev);
+
+ /* Initialize the basic PCI subsystem of the device */
+ ret = idt_init_pci(ndev);
+ if (ret != 0)
+ return ret;
+
+ /* Scan ports of the IDT PCIe-switch */
+ (void)idt_scan_ports(ndev);
+
+ /* Initialize NTB link events subsystem */
+ idt_init_link(ndev);
+
+ /* Initialize MWs subsystem */
+ ret = idt_init_mws(ndev);
+ if (ret != 0)
+ goto err_deinit_link;
+
+ /* Initialize Messaging subsystem */
+ idt_init_msg(ndev);
+
+ /* Initialize IDT interrupts handler */
+ ret = idt_init_isr(ndev);
+ if (ret != 0)
+ goto err_deinit_link;
+
+ /* Register IDT NTB devices on the NTB bus */
+ ret = idt_register_device(ndev);
+ if (ret != 0)
+ goto err_deinit_isr;
+
+ /* Initialize DebugFS info node */
+ (void)idt_init_dbgfs(ndev);
+
+ /* IDT PCIe-switch NTB driver is finally initialized */
+ dev_info(&pdev->dev, "IDT NTB device is ready");
+
+ /* May the force be with us... */
+ return 0;
+
+err_deinit_isr:
+ idt_deinit_isr(ndev);
+err_deinit_link:
+ idt_deinit_link(ndev);
+ idt_deinit_pci(ndev);
+
+ return ret;
+}
+
+/*
+ * idt_pci_probe() - PCI device remove callback
+ * @pdev: Pointer to PCI device structure
+ */
+static void idt_pci_remove(struct pci_dev *pdev)
+{
+ struct idt_ntb_dev *ndev = pci_get_drvdata(pdev);
+
+ /* Deinit the DebugFS node */
+ idt_deinit_dbgfs(ndev);
+
+ /* Unregister NTB device */
+ idt_unregister_device(ndev);
+
+ /* Stop the interrupts handling */
+ idt_deinit_isr(ndev);
+
+ /* Deinitialize link event subsystem */
+ idt_deinit_link(ndev);
+
+ /* Deinit basic PCI subsystem */
+ idt_deinit_pci(ndev);
+
+ /* IDT PCIe-switch NTB driver is finally initialized */
+ dev_info(&pdev->dev, "IDT NTB device is removed");
+
+ /* Sayonara... */
+}
+
+/*
+ * IDT PCIe-switch models ports configuration structures
+ */
+static struct idt_89hpes_cfg idt_89hpes24nt6ag2_config = {
+ .name = "89HPES24NT6AG2",
+ .port_cnt = 6, .ports = {0, 2, 4, 6, 8, 12}
+};
+static struct idt_89hpes_cfg idt_89hpes32nt8ag2_config = {
+ .name = "89HPES32NT8AG2",
+ .port_cnt = 8, .ports = {0, 2, 4, 6, 8, 12, 16, 20}
+};
+static struct idt_89hpes_cfg idt_89hpes32nt8bg2_config = {
+ .name = "89HPES32NT8BG2",
+ .port_cnt = 8, .ports = {0, 2, 4, 6, 8, 12, 16, 20}
+};
+static struct idt_89hpes_cfg idt_89hpes12nt12g2_config = {
+ .name = "89HPES12NT12G2",
+ .port_cnt = 3, .ports = {0, 8, 16}
+};
+static struct idt_89hpes_cfg idt_89hpes16nt16g2_config = {
+ .name = "89HPES16NT16G2",
+ .port_cnt = 4, .ports = {0, 8, 12, 16}
+};
+static struct idt_89hpes_cfg idt_89hpes24nt24g2_config = {
+ .name = "89HPES24NT24G2",
+ .port_cnt = 8, .ports = {0, 2, 4, 6, 8, 12, 16, 20}
+};
+static struct idt_89hpes_cfg idt_89hpes32nt24ag2_config = {
+ .name = "89HPES32NT24AG2",
+ .port_cnt = 8, .ports = {0, 2, 4, 6, 8, 12, 16, 20}
+};
+static struct idt_89hpes_cfg idt_89hpes32nt24bg2_config = {
+ .name = "89HPES32NT24BG2",
+ .port_cnt = 8, .ports = {0, 2, 4, 6, 8, 12, 16, 20}
+};
+
+/*
+ * PCI-ids table of the supported IDT PCIe-switch devices
+ */
+static const struct pci_device_id idt_pci_tbl[] = {
+ {IDT_PCI_DEVICE_IDS(89HPES24NT6AG2, idt_89hpes24nt6ag2_config)},
+ {IDT_PCI_DEVICE_IDS(89HPES32NT8AG2, idt_89hpes32nt8ag2_config)},
+ {IDT_PCI_DEVICE_IDS(89HPES32NT8BG2, idt_89hpes32nt8bg2_config)},
+ {IDT_PCI_DEVICE_IDS(89HPES12NT12G2, idt_89hpes12nt12g2_config)},
+ {IDT_PCI_DEVICE_IDS(89HPES16NT16G2, idt_89hpes16nt16g2_config)},
+ {IDT_PCI_DEVICE_IDS(89HPES24NT24G2, idt_89hpes24nt24g2_config)},
+ {IDT_PCI_DEVICE_IDS(89HPES32NT24AG2, idt_89hpes32nt24ag2_config)},
+ {IDT_PCI_DEVICE_IDS(89HPES32NT24BG2, idt_89hpes32nt24bg2_config)},
+ {0}
+};
+MODULE_DEVICE_TABLE(pci, idt_pci_tbl);
+
+/*
+ * IDT PCIe-switch NT-function device driver structure definition
+ */
+static struct pci_driver idt_pci_driver = {
+ .name = KBUILD_MODNAME,
+ .probe = idt_pci_probe,
+ .remove = idt_pci_remove,
+ .id_table = idt_pci_tbl,
+};
+
+static int __init idt_pci_driver_init(void)
+{
+ pr_info("%s %s\n", NTB_DESC, NTB_VER);
+
+ /* Create the top DebugFS directory if the FS is initialized */
+ if (debugfs_initialized())
+ dbgfs_topdir = debugfs_create_dir(KBUILD_MODNAME, NULL);
+
+ /* Register the NTB hardware driver to handle the PCI device */
+ return pci_register_driver(&idt_pci_driver);
+}
+module_init(idt_pci_driver_init);
+
+static void __exit idt_pci_driver_exit(void)
+{
+ /* Unregister the NTB hardware driver */
+ pci_unregister_driver(&idt_pci_driver);
+
+ /* Discard the top DebugFS directory */
+ debugfs_remove_recursive(dbgfs_topdir);
+}
+module_exit(idt_pci_driver_exit);
+
diff --git a/drivers/ntb/hw/idt/ntb_hw_idt.h b/drivers/ntb/hw/idt/ntb_hw_idt.h
new file mode 100644
index 0000000..856fd18
--- /dev/null
+++ b/drivers/ntb/hw/idt/ntb_hw_idt.h
@@ -0,0 +1,1149 @@
+/*
+ * This file is provided under a GPLv2 license. When using or
+ * redistributing this file, you may do so under that license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright (C) 2016 T-Platforms All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+ * Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, one can be found http://www.gnu.org/licenses/.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * IDT PCIe-switch NTB Linux driver
+ *
+ * Contact Information:
+ * Serge Semin <fancer.lancer@xxxxxxxxx>, <Sergey.Semin@xxxxxxxxxxxxxx>
+ */
+
+#ifndef NTB_HW_IDT_H
+#define NTB_HW_IDT_H
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/ntb.h>
+
+
+/*
+ * Macro is used to create the struct pci_device_id that matches
+ * the supported IDT PCIe-switches
+ * @devname: Capitalized name of the particular device
+ * @data: Variable passed to the driver of the particular device
+ */
+#define IDT_PCI_DEVICE_IDS(devname, data) \
+ .vendor = PCI_VENDOR_ID_IDT, .device = PCI_DEVICE_ID_IDT_##devname, \
+ .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, \
+ .class = (PCI_CLASS_BRIDGE_OTHER << 8), .class_mask = (0xFFFF00), \
+ .driver_data = (kernel_ulong_t)&data
+
+/*
+ * IDT PCIe-switches device IDs
+ */
+#define PCI_DEVICE_ID_IDT_89HPES24NT6AG2 0x8091
+#define PCI_DEVICE_ID_IDT_89HPES32NT8AG2 0x808F
+#define PCI_DEVICE_ID_IDT_89HPES32NT8BG2 0x8088
+#define PCI_DEVICE_ID_IDT_89HPES12NT12G2 0x8092
+#define PCI_DEVICE_ID_IDT_89HPES16NT16G2 0x8090
+#define PCI_DEVICE_ID_IDT_89HPES24NT24G2 0x808E
+#define PCI_DEVICE_ID_IDT_89HPES32NT24AG2 0x808C
+#define PCI_DEVICE_ID_IDT_89HPES32NT24BG2 0x808A
+
+/*
+ * NT-function Configuration Space registers
+ * NOTE 1) The IDT PCIe-switch internal data is little-endian
+ * so it must be taken into account in the driver
+ * internals.
+ * 2) Additionally the registers should be accessed either
+ * with byte-enables corresponding to their native size or
+ * the size of one DWORD
+ *
+ * So to simplify the driver code, there is only DWORD-sized read/write
+ * operations utilized.
+ */
+/* PCI Express Configuration Space */
+/* PCI Express command/status register (DWORD) */
+#define IDT_NT_PCICMDSTS 0x00004U
+/* PCI Express Device Capabilities (DWORD) */
+#define IDT_NT_PCIEDCAP 0x00044U
+/* PCI Express Device Control/Status (WORD+WORD) */
+#define IDT_NT_PCIEDCTLSTS 0x00048U
+/* PCI Express Link Capabilities (DWORD) */
+#define IDT_NT_PCIELCAP 0x0004CU
+/* PCI Express Link Control/Status (WORD+WORD) */
+#define IDT_NT_PCIELCTLSTS 0x00050U
+/* PCI Express Device Capabilities 2 (DWORD) */
+#define IDT_NT_PCIEDCAP2 0x00064U
+/* PCI Express Device Control 2 (WORD+WORD) */
+#define IDT_NT_PCIEDCTL2 0x00068U
+/* PCI Power Management Control and Status (DWORD) */
+#define IDT_NT_PMCSR 0x000C4U
+/*==========================================*/
+/* IDT Proprietary NT-port-specific registers */
+/* NT-function main control registers */
+/* NT Endpoint Control (DWORD) */
+#define IDT_NT_NTCTL 0x00400U
+/* NT Endpoint Interrupt Status/Mask (DWORD) */
+#define IDT_NT_NTINTSTS 0x00404U
+#define IDT_NT_NTINTMSK 0x00408U
+/* NT Endpoint Signal Data (DWORD) */
+#define IDT_NT_NTSDATA 0x0040CU
+/* NT Endpoint Global Signal (DWORD) */
+#define IDT_NT_NTGSIGNAL 0x00410U
+/* Internal Error Reporting Mask 0/1 (DWORD) */
+#define IDT_NT_NTIERRORMSK0 0x00414U
+#define IDT_NT_NTIERRORMSK1 0x00418U
+/* Doorbel registers */
+/* NT Outbound Doorbell Set (DWORD) */
+#define IDT_NT_OUTDBELLSET 0x00420U
+/* NT Inbound Doorbell Status/Mask (DWORD) */
+#define IDT_NT_INDBELLSTS 0x00428U
+#define IDT_NT_INDBELLMSK 0x0042CU
+/* Message registers */
+/* Outbound Message N (DWORD) */
+#define IDT_NT_OUTMSG0 0x00430U
+#define IDT_NT_OUTMSG1 0x00434U
+#define IDT_NT_OUTMSG2 0x00438U
+#define IDT_NT_OUTMSG3 0x0043CU
+/* Inbound Message N (DWORD) */
+#define IDT_NT_INMSG0 0x00440U
+#define IDT_NT_INMSG1 0x00444U
+#define IDT_NT_INMSG2 0x00448U
+#define IDT_NT_INMSG3 0x0044CU
+/* Inbound Message Source N (DWORD) */
+#define IDT_NT_INMSGSRC0 0x00450U
+#define IDT_NT_INMSGSRC1 0x00454U
+#define IDT_NT_INMSGSRC2 0x00458U
+#define IDT_NT_INMSGSRC3 0x0045CU
+/* Message Status (DWORD) */
+#define IDT_NT_MSGSTS 0x00460U
+/* Message Status Mask (DWORD) */
+#define IDT_NT_MSGSTSMSK 0x00464U
+/* BAR-setup registers */
+/* BAR N Setup/Limit Address/Lower and Upper Translated Base Address (DWORD) */
+#define IDT_NT_BARSETUP0 0x00470U
+#define IDT_NT_BARLIMIT0 0x00474U
+#define IDT_NT_BARLTBASE0 0x00478U
+#define IDT_NT_BARUTBASE0 0x0047CU
+#define IDT_NT_BARSETUP1 0x00480U
+#define IDT_NT_BARLIMIT1 0x00484U
+#define IDT_NT_BARLTBASE1 0x00488U
+#define IDT_NT_BARUTBASE1 0x0048CU
+#define IDT_NT_BARSETUP2 0x00490U
+#define IDT_NT_BARLIMIT2 0x00494U
+#define IDT_NT_BARLTBASE2 0x00498U
+#define IDT_NT_BARUTBASE2 0x0049CU
+#define IDT_NT_BARSETUP3 0x004A0U
+#define IDT_NT_BARLIMIT3 0x004A4U
+#define IDT_NT_BARLTBASE3 0x004A8U
+#define IDT_NT_BARUTBASE3 0x004ACU
+#define IDT_NT_BARSETUP4 0x004B0U
+#define IDT_NT_BARLIMIT4 0x004B4U
+#define IDT_NT_BARLTBASE4 0x004B8U
+#define IDT_NT_BARUTBASE4 0x004BCU
+#define IDT_NT_BARSETUP5 0x004C0U
+#define IDT_NT_BARLIMIT5 0x004C4U
+#define IDT_NT_BARLTBASE5 0x004C8U
+#define IDT_NT_BARUTBASE5 0x004CCU
+/* NT mapping table registers */
+/* NT Mapping Table Address/Status/Data (DWORD) */
+#define IDT_NT_NTMTBLADDR 0x004D0U
+#define IDT_NT_NTMTBLSTS 0x004D4U
+#define IDT_NT_NTMTBLDATA 0x004D8U
+/* Requester ID (Bus:Device:Function) Capture (DWORD) */
+#define IDT_NT_REQIDCAP 0x004DCU
+/* Memory Windows Lookup table registers */
+/* Lookup Table Offset/Lower, Middle and Upper data (DWORD) */
+#define IDT_NT_LUTOFFSET 0x004E0U
+#define IDT_NT_LUTLDATA 0x004E4U
+#define IDT_NT_LUTMDATA 0x004E8U
+#define IDT_NT_LUTUDATA 0x004ECU
+/* NT Endpoint Uncorrectable/Correctable Errors Emulation registers (DWORD) */
+#define IDT_NT_NTUEEM 0x004F0U
+#define IDT_NT_NTCEEM 0x004F4U
+/* Global Address Space Access/Data registers (DWARD) */
+#define IDT_NT_GASAADDR 0x00FF8U
+#define IDT_NT_GASADATA 0x00FFCU
+
+/*
+ * IDT PCIe-switch Global Configuration and Status registers
+ */
+/* Port N Configuration register in global space */
+/* PCI Express command/status and link control/status registers (WORD+WORD) */
+#define IDT_SW_NTP0_PCIECMDSTS 0x01004U
+#define IDT_SW_NTP0_PCIELCTLSTS 0x01050U
+/* NT-function control register (DWORD) */
+#define IDT_SW_NTP0_NTCTL 0x01400U
+/* BAR setup/limit/base address registers (DWORD) */
+#define IDT_SW_NTP0_BARSETUP0 0x01470U
+#define IDT_SW_NTP0_BARLIMIT0 0x01474U
+#define IDT_SW_NTP0_BARLTBASE0 0x01478U
+#define IDT_SW_NTP0_BARUTBASE0 0x0147CU
+#define IDT_SW_NTP0_BARSETUP1 0x01480U
+#define IDT_SW_NTP0_BARLIMIT1 0x01484U
+#define IDT_SW_NTP0_BARLTBASE1 0x01488U
+#define IDT_SW_NTP0_BARUTBASE1 0x0148CU
+#define IDT_SW_NTP0_BARSETUP2 0x01490U
+#define IDT_SW_NTP0_BARLIMIT2 0x01494U
+#define IDT_SW_NTP0_BARLTBASE2 0x01498U
+#define IDT_SW_NTP0_BARUTBASE2 0x0149CU
+#define IDT_SW_NTP0_BARSETUP3 0x014A0U
+#define IDT_SW_NTP0_BARLIMIT3 0x014A4U
+#define IDT_SW_NTP0_BARLTBASE3 0x014A8U
+#define IDT_SW_NTP0_BARUTBASE3 0x014ACU
+#define IDT_SW_NTP0_BARSETUP4 0x014B0U
+#define IDT_SW_NTP0_BARLIMIT4 0x014B4U
+#define IDT_SW_NTP0_BARLTBASE4 0x014B8U
+#define IDT_SW_NTP0_BARUTBASE4 0x014BCU
+#define IDT_SW_NTP0_BARSETUP5 0x014C0U
+#define IDT_SW_NTP0_BARLIMIT5 0x014C4U
+#define IDT_SW_NTP0_BARLTBASE5 0x014C8U
+#define IDT_SW_NTP0_BARUTBASE5 0x014CCU
+/* PCI Express command/status and link control/status registers (WORD+WORD) */
+#define IDT_SW_NTP2_PCIECMDSTS 0x05004U
+#define IDT_SW_NTP2_PCIELCTLSTS 0x05050U
+/* NT-function control register (DWORD) */
+#define IDT_SW_NTP2_NTCTL 0x05400U
+/* BAR setup/limit/base address registers (DWORD) */
+#define IDT_SW_NTP2_BARSETUP0 0x05470U
+#define IDT_SW_NTP2_BARLIMIT0 0x05474U
+#define IDT_SW_NTP2_BARLTBASE0 0x05478U
+#define IDT_SW_NTP2_BARUTBASE0 0x0547CU
+#define IDT_SW_NTP2_BARSETUP1 0x05480U
+#define IDT_SW_NTP2_BARLIMIT1 0x05484U
+#define IDT_SW_NTP2_BARLTBASE1 0x05488U
+#define IDT_SW_NTP2_BARUTBASE1 0x0548CU
+#define IDT_SW_NTP2_BARSETUP2 0x05490U
+#define IDT_SW_NTP2_BARLIMIT2 0x05494U
+#define IDT_SW_NTP2_BARLTBASE2 0x05498U
+#define IDT_SW_NTP2_BARUTBASE2 0x0549CU
+#define IDT_SW_NTP2_BARSETUP3 0x054A0U
+#define IDT_SW_NTP2_BARLIMIT3 0x054A4U
+#define IDT_SW_NTP2_BARLTBASE3 0x054A8U
+#define IDT_SW_NTP2_BARUTBASE3 0x054ACU
+#define IDT_SW_NTP2_BARSETUP4 0x054B0U
+#define IDT_SW_NTP2_BARLIMIT4 0x054B4U
+#define IDT_SW_NTP2_BARLTBASE4 0x054B8U
+#define IDT_SW_NTP2_BARUTBASE4 0x054BCU
+#define IDT_SW_NTP2_BARSETUP5 0x054C0U
+#define IDT_SW_NTP2_BARLIMIT5 0x054C4U
+#define IDT_SW_NTP2_BARLTBASE5 0x054C8U
+#define IDT_SW_NTP2_BARUTBASE5 0x054CCU
+/* PCI Express command/status and link control/status registers (WORD+WORD) */
+#define IDT_SW_NTP4_PCIECMDSTS 0x09004U
+#define IDT_SW_NTP4_PCIELCTLSTS 0x09050U
+/* NT-function control register (DWORD) */
+#define IDT_SW_NTP4_NTCTL 0x09400U
+/* BAR setup/limit/base address registers (DWORD) */
+#define IDT_SW_NTP4_BARSETUP0 0x09470U
+#define IDT_SW_NTP4_BARLIMIT0 0x09474U
+#define IDT_SW_NTP4_BARLTBASE0 0x09478U
+#define IDT_SW_NTP4_BARUTBASE0 0x0947CU
+#define IDT_SW_NTP4_BARSETUP1 0x09480U
+#define IDT_SW_NTP4_BARLIMIT1 0x09484U
+#define IDT_SW_NTP4_BARLTBASE1 0x09488U
+#define IDT_SW_NTP4_BARUTBASE1 0x0948CU
+#define IDT_SW_NTP4_BARSETUP2 0x09490U
+#define IDT_SW_NTP4_BARLIMIT2 0x09494U
+#define IDT_SW_NTP4_BARLTBASE2 0x09498U
+#define IDT_SW_NTP4_BARUTBASE2 0x0949CU
+#define IDT_SW_NTP4_BARSETUP3 0x094A0U
+#define IDT_SW_NTP4_BARLIMIT3 0x094A4U
+#define IDT_SW_NTP4_BARLTBASE3 0x094A8U
+#define IDT_SW_NTP4_BARUTBASE3 0x094ACU
+#define IDT_SW_NTP4_BARSETUP4 0x094B0U
+#define IDT_SW_NTP4_BARLIMIT4 0x094B4U
+#define IDT_SW_NTP4_BARLTBASE4 0x094B8U
+#define IDT_SW_NTP4_BARUTBASE4 0x094BCU
+#define IDT_SW_NTP4_BARSETUP5 0x094C0U
+#define IDT_SW_NTP4_BARLIMIT5 0x094C4U
+#define IDT_SW_NTP4_BARLTBASE5 0x094C8U
+#define IDT_SW_NTP4_BARUTBASE5 0x094CCU
+/* PCI Express command/status and link control/status registers (WORD+WORD) */
+#define IDT_SW_NTP6_PCIECMDSTS 0x0D004U
+#define IDT_SW_NTP6_PCIELCTLSTS 0x0D050U
+/* NT-function control register (DWORD) */
+#define IDT_SW_NTP6_NTCTL 0x0D400U
+/* BAR setup/limit/base address registers (DWORD) */
+#define IDT_SW_NTP6_BARSETUP0 0x0D470U
+#define IDT_SW_NTP6_BARLIMIT0 0x0D474U
+#define IDT_SW_NTP6_BARLTBASE0 0x0D478U
+#define IDT_SW_NTP6_BARUTBASE0 0x0D47CU
+#define IDT_SW_NTP6_BARSETUP1 0x0D480U
+#define IDT_SW_NTP6_BARLIMIT1 0x0D484U
+#define IDT_SW_NTP6_BARLTBASE1 0x0D488U
+#define IDT_SW_NTP6_BARUTBASE1 0x0D48CU
+#define IDT_SW_NTP6_BARSETUP2 0x0D490U
+#define IDT_SW_NTP6_BARLIMIT2 0x0D494U
+#define IDT_SW_NTP6_BARLTBASE2 0x0D498U
+#define IDT_SW_NTP6_BARUTBASE2 0x0D49CU
+#define IDT_SW_NTP6_BARSETUP3 0x0D4A0U
+#define IDT_SW_NTP6_BARLIMIT3 0x0D4A4U
+#define IDT_SW_NTP6_BARLTBASE3 0x0D4A8U
+#define IDT_SW_NTP6_BARUTBASE3 0x0D4ACU
+#define IDT_SW_NTP6_BARSETUP4 0x0D4B0U
+#define IDT_SW_NTP6_BARLIMIT4 0x0D4B4U
+#define IDT_SW_NTP6_BARLTBASE4 0x0D4B8U
+#define IDT_SW_NTP6_BARUTBASE4 0x0D4BCU
+#define IDT_SW_NTP6_BARSETUP5 0x0D4C0U
+#define IDT_SW_NTP6_BARLIMIT5 0x0D4C4U
+#define IDT_SW_NTP6_BARLTBASE5 0x0D4C8U
+#define IDT_SW_NTP6_BARUTBASE5 0x0D4CCU
+/* PCI Express command/status and link control/status registers (WORD+WORD) */
+#define IDT_SW_NTP8_PCIECMDSTS 0x11004U
+#define IDT_SW_NTP8_PCIELCTLSTS 0x11050U
+/* NT-function control register (DWORD) */
+#define IDT_SW_NTP8_NTCTL 0x11400U
+/* BAR setup/limit/base address registers (DWORD) */
+#define IDT_SW_NTP8_BARSETUP0 0x11470U
+#define IDT_SW_NTP8_BARLIMIT0 0x11474U
+#define IDT_SW_NTP8_BARLTBASE0 0x11478U
+#define IDT_SW_NTP8_BARUTBASE0 0x1147CU
+#define IDT_SW_NTP8_BARSETUP1 0x11480U
+#define IDT_SW_NTP8_BARLIMIT1 0x11484U
+#define IDT_SW_NTP8_BARLTBASE1 0x11488U
+#define IDT_SW_NTP8_BARUTBASE1 0x1148CU
+#define IDT_SW_NTP8_BARSETUP2 0x11490U
+#define IDT_SW_NTP8_BARLIMIT2 0x11494U
+#define IDT_SW_NTP8_BARLTBASE2 0x11498U
+#define IDT_SW_NTP8_BARUTBASE2 0x1149CU
+#define IDT_SW_NTP8_BARSETUP3 0x114A0U
+#define IDT_SW_NTP8_BARLIMIT3 0x114A4U
+#define IDT_SW_NTP8_BARLTBASE3 0x114A8U
+#define IDT_SW_NTP8_BARUTBASE3 0x114ACU
+#define IDT_SW_NTP8_BARSETUP4 0x114B0U
+#define IDT_SW_NTP8_BARLIMIT4 0x114B4U
+#define IDT_SW_NTP8_BARLTBASE4 0x114B8U
+#define IDT_SW_NTP8_BARUTBASE4 0x114BCU
+#define IDT_SW_NTP8_BARSETUP5 0x114C0U
+#define IDT_SW_NTP8_BARLIMIT5 0x114C4U
+#define IDT_SW_NTP8_BARLTBASE5 0x114C8U
+#define IDT_SW_NTP8_BARUTBASE5 0x114CCU
+/* PCI Express command/status and link control/status registers (WORD+WORD) */
+#define IDT_SW_NTP12_PCIECMDSTS 0x19004U
+#define IDT_SW_NTP12_PCIELCTLSTS 0x19050U
+/* NT-function control register (DWORD) */
+#define IDT_SW_NTP12_NTCTL 0x19400U
+/* BAR setup/limit/base address registers (DWORD) */
+#define IDT_SW_NTP12_BARSETUP0 0x19470U
+#define IDT_SW_NTP12_BARLIMIT0 0x19474U
+#define IDT_SW_NTP12_BARLTBASE0 0x19478U
+#define IDT_SW_NTP12_BARUTBASE0 0x1947CU
+#define IDT_SW_NTP12_BARSETUP1 0x19480U
+#define IDT_SW_NTP12_BARLIMIT1 0x19484U
+#define IDT_SW_NTP12_BARLTBASE1 0x19488U
+#define IDT_SW_NTP12_BARUTBASE1 0x1948CU
+#define IDT_SW_NTP12_BARSETUP2 0x19490U
+#define IDT_SW_NTP12_BARLIMIT2 0x19494U
+#define IDT_SW_NTP12_BARLTBASE2 0x19498U
+#define IDT_SW_NTP12_BARUTBASE2 0x1949CU
+#define IDT_SW_NTP12_BARSETUP3 0x194A0U
+#define IDT_SW_NTP12_BARLIMIT3 0x194A4U
+#define IDT_SW_NTP12_BARLTBASE3 0x194A8U
+#define IDT_SW_NTP12_BARUTBASE3 0x194ACU
+#define IDT_SW_NTP12_BARSETUP4 0x194B0U
+#define IDT_SW_NTP12_BARLIMIT4 0x194B4U
+#define IDT_SW_NTP12_BARLTBASE4 0x194B8U
+#define IDT_SW_NTP12_BARUTBASE4 0x194BCU
+#define IDT_SW_NTP12_BARSETUP5 0x194C0U
+#define IDT_SW_NTP12_BARLIMIT5 0x194C4U
+#define IDT_SW_NTP12_BARLTBASE5 0x194C8U
+#define IDT_SW_NTP12_BARUTBASE5 0x194CCU
+/* PCI Express command/status and link control/status registers (WORD+WORD) */
+#define IDT_SW_NTP16_PCIECMDSTS 0x21004U
+#define IDT_SW_NTP16_PCIELCTLSTS 0x21050U
+/* NT-function control register (DWORD) */
+#define IDT_SW_NTP16_NTCTL 0x21400U
+/* BAR setup/limit/base address registers (DWORD) */
+#define IDT_SW_NTP16_BARSETUP0 0x21470U
+#define IDT_SW_NTP16_BARLIMIT0 0x21474U
+#define IDT_SW_NTP16_BARLTBASE0 0x21478U
+#define IDT_SW_NTP16_BARUTBASE0 0x2147CU
+#define IDT_SW_NTP16_BARSETUP1 0x21480U
+#define IDT_SW_NTP16_BARLIMIT1 0x21484U
+#define IDT_SW_NTP16_BARLTBASE1 0x21488U
+#define IDT_SW_NTP16_BARUTBASE1 0x2148CU
+#define IDT_SW_NTP16_BARSETUP2 0x21490U
+#define IDT_SW_NTP16_BARLIMIT2 0x21494U
+#define IDT_SW_NTP16_BARLTBASE2 0x21498U
+#define IDT_SW_NTP16_BARUTBASE2 0x2149CU
+#define IDT_SW_NTP16_BARSETUP3 0x214A0U
+#define IDT_SW_NTP16_BARLIMIT3 0x214A4U
+#define IDT_SW_NTP16_BARLTBASE3 0x214A8U
+#define IDT_SW_NTP16_BARUTBASE3 0x214ACU
+#define IDT_SW_NTP16_BARSETUP4 0x214B0U
+#define IDT_SW_NTP16_BARLIMIT4 0x214B4U
+#define IDT_SW_NTP16_BARLTBASE4 0x214B8U
+#define IDT_SW_NTP16_BARUTBASE4 0x214BCU
+#define IDT_SW_NTP16_BARSETUP5 0x214C0U
+#define IDT_SW_NTP16_BARLIMIT5 0x214C4U
+#define IDT_SW_NTP16_BARLTBASE5 0x214C8U
+#define IDT_SW_NTP16_BARUTBASE5 0x214CCU
+/* PCI Express command/status and link control/status registers (WORD+WORD) */
+#define IDT_SW_NTP20_PCIECMDSTS 0x29004U
+#define IDT_SW_NTP20_PCIELCTLSTS 0x29050U
+/* NT-function control register (DWORD) */
+#define IDT_SW_NTP20_NTCTL 0x29400U
+/* BAR setup/limit/base address registers (DWORD) */
+#define IDT_SW_NTP20_BARSETUP0 0x29470U
+#define IDT_SW_NTP20_BARLIMIT0 0x29474U
+#define IDT_SW_NTP20_BARLTBASE0 0x29478U
+#define IDT_SW_NTP20_BARUTBASE0 0x2947CU
+#define IDT_SW_NTP20_BARSETUP1 0x29480U
+#define IDT_SW_NTP20_BARLIMIT1 0x29484U
+#define IDT_SW_NTP20_BARLTBASE1 0x29488U
+#define IDT_SW_NTP20_BARUTBASE1 0x2948CU
+#define IDT_SW_NTP20_BARSETUP2 0x29490U
+#define IDT_SW_NTP20_BARLIMIT2 0x29494U
+#define IDT_SW_NTP20_BARLTBASE2 0x29498U
+#define IDT_SW_NTP20_BARUTBASE2 0x2949CU
+#define IDT_SW_NTP20_BARSETUP3 0x294A0U
+#define IDT_SW_NTP20_BARLIMIT3 0x294A4U
+#define IDT_SW_NTP20_BARLTBASE3 0x294A8U
+#define IDT_SW_NTP20_BARUTBASE3 0x294ACU
+#define IDT_SW_NTP20_BARSETUP4 0x294B0U
+#define IDT_SW_NTP20_BARLIMIT4 0x294B4U
+#define IDT_SW_NTP20_BARLTBASE4 0x294B8U
+#define IDT_SW_NTP20_BARUTBASE4 0x294BCU
+#define IDT_SW_NTP20_BARSETUP5 0x294C0U
+#define IDT_SW_NTP20_BARLIMIT5 0x294C4U
+#define IDT_SW_NTP20_BARLTBASE5 0x294C8U
+#define IDT_SW_NTP20_BARUTBASE5 0x294CCU
+/* IDT PCIe-switch control register (DWORD) */
+#define IDT_SW_CTL 0x3E000U
+/* Boot Configuration Vector Status (DWORD) */
+#define IDT_SW_BCVSTS 0x3E004U
+/* Port Clocking Mode (DWORD) */
+#define IDT_SW_PCLKMODE 0x3E008U
+/* Reset Drain Delay (DWORD) */
+#define IDT_SW_RDRAINDELAY 0x3E080U
+/* Port Operating Mode Change Drain Delay (DWORD) */
+#define IDT_SW_POMCDELAY 0x3E084U
+/* Side Effect Delay (DWORD) */
+#define IDT_SW_SEDELAY 0x3E088U
+/* Upstream Secondary Bus Reset Delay (DWORD) */
+#define IDT_SW_SSBRDELAY 0x3E08CU
+/* Switch partition N Control/Status/Failover registers */
+#define IDT_SW_SWPART0CTL 0x3E100U
+#define IDT_SW_SWPART0STS 0x3E104U
+#define IDT_SW_SWPART0FCTL 0x3E108U
+#define IDT_SW_SWPART1CTL 0x3E120U
+#define IDT_SW_SWPART1STS 0x3E124U
+#define IDT_SW_SWPART1FCTL 0x3E128U
+#define IDT_SW_SWPART2CTL 0x3E140U
+#define IDT_SW_SWPART2STS 0x3E144U
+#define IDT_SW_SWPART2FCTL 0x3E148U
+#define IDT_SW_SWPART3CTL 0x3E160U
+#define IDT_SW_SWPART3STS 0x3E164U
+#define IDT_SW_SWPART3FCTL 0x3E168U
+#define IDT_SW_SWPART4CTL 0x3E180U
+#define IDT_SW_SWPART4STS 0x3E184U
+#define IDT_SW_SWPART4FCTL 0x3E188U
+#define IDT_SW_SWPART5CTL 0x3E1A0U
+#define IDT_SW_SWPART5STS 0x3E1A4U
+#define IDT_SW_SWPART5FCTL 0x3E1A8U
+#define IDT_SW_SWPART6CTL 0x3E1C0U
+#define IDT_SW_SWPART6STS 0x3E1C4U
+#define IDT_SW_SWPART6FCTL 0x3E1C8U
+#define IDT_SW_SWPART7CTL 0x3E1E0U
+#define IDT_SW_SWPART7STS 0x3E1E4U
+#define IDT_SW_SWPART7FCTL 0x3E1E8U
+/* Switch port N control and status registers */
+#define IDT_SW_SWPORT0CTL 0x3E200U
+#define IDT_SW_SWPORT0STS 0x3E204U
+#define IDT_SW_SWPORT0FCTL 0x3E208U
+#define IDT_SW_SWPORT2CTL 0x3E240U
+#define IDT_SW_SWPORT2STS 0x3E244U
+#define IDT_SW_SWPORT2FCTL 0x3E248U
+#define IDT_SW_SWPORT4CTL 0x3E280U
+#define IDT_SW_SWPORT4STS 0x3E284U
+#define IDT_SW_SWPORT4FCTL 0x3E288U
+#define IDT_SW_SWPORT6CTL 0x3E2C0U
+#define IDT_SW_SWPORT6STS 0x3E2C4U
+#define IDT_SW_SWPORT6FCTL 0x3E2C8U
+#define IDT_SW_SWPORT8CTL 0x3E300U
+#define IDT_SW_SWPORT8STS 0x3E304U
+#define IDT_SW_SWPORT8FCTL 0x3E308U
+#define IDT_SW_SWPORT12CTL 0x3E380U
+#define IDT_SW_SWPORT12STS 0x3E384U
+#define IDT_SW_SWPORT12FCTL 0x3E388U
+#define IDT_SW_SWPORT16CTL 0x3E400U
+#define IDT_SW_SWPORT16STS 0x3E404U
+#define IDT_SW_SWPORT16FCTL 0x3E408U
+#define IDT_SW_SWPORT20CTL 0x3E480U
+#define IDT_SW_SWPORT20STS 0x3E484U
+#define IDT_SW_SWPORT20FCTL 0x3E488U
+/* Switch Event registers */
+/* Switch Event Status/Mask/Partition mask (DWORD) */
+#define IDT_SW_SESTS 0x3EC00U
+#define IDT_SW_SEMSK 0x3EC04U
+#define IDT_SW_SEPMSK 0x3EC08U
+/* Switch Event Link Up/Down Status/Mask (DWORD) */
+#define IDT_SW_SELINKUPSTS 0x3EC0CU
+#define IDT_SW_SELINKUPMSK 0x3EC10U
+#define IDT_SW_SELINKDNSTS 0x3EC14U
+#define IDT_SW_SELINKDNMSK 0x3EC18U
+/* Switch Event Fundamental Reset Status/Mask (DWORD) */
+#define IDT_SW_SEFRSTSTS 0x3EC1CU
+#define IDT_SW_SEFRSTMSK 0x3EC20U
+/* Switch Event Hot Reset Status/Mask (DWORD) */
+#define IDT_SW_SEHRSTSTS 0x3EC24U
+#define IDT_SW_SEHRSTMSK 0x3EC28U
+/* Switch Event Failover Mask (DWORD) */
+#define IDT_SW_SEFOVRMSK 0x3EC2CU
+/* Switch Event Global Signal Status/Mask (DWORD) */
+#define IDT_SW_SEGSIGSTS 0x3EC30U
+#define IDT_SW_SEGSIGMSK 0x3EC34U
+/* NT Global Doorbell Status (DWORD) */
+#define IDT_SW_GDBELLSTS 0x3EC3CU
+/* Switch partition N message M control (msgs routing table) (DWORD) */
+#define IDT_SW_SWP0MSGCTL0 0x3EE00U
+#define IDT_SW_SWP1MSGCTL0 0x3EE04U
+#define IDT_SW_SWP2MSGCTL0 0x3EE08U
+#define IDT_SW_SWP3MSGCTL0 0x3EE0CU
+#define IDT_SW_SWP4MSGCTL0 0x3EE10U
+#define IDT_SW_SWP5MSGCTL0 0x3EE14U
+#define IDT_SW_SWP6MSGCTL0 0x3EE18U
+#define IDT_SW_SWP7MSGCTL0 0x3EE1CU
+#define IDT_SW_SWP0MSGCTL1 0x3EE20U
+#define IDT_SW_SWP1MSGCTL1 0x3EE24U
+#define IDT_SW_SWP2MSGCTL1 0x3EE28U
+#define IDT_SW_SWP3MSGCTL1 0x3EE2CU
+#define IDT_SW_SWP4MSGCTL1 0x3EE30U
+#define IDT_SW_SWP5MSGCTL1 0x3EE34U
+#define IDT_SW_SWP6MSGCTL1 0x3EE38U
+#define IDT_SW_SWP7MSGCTL1 0x3EE3CU
+#define IDT_SW_SWP0MSGCTL2 0x3EE40U
+#define IDT_SW_SWP1MSGCTL2 0x3EE44U
+#define IDT_SW_SWP2MSGCTL2 0x3EE48U
+#define IDT_SW_SWP3MSGCTL2 0x3EE4CU
+#define IDT_SW_SWP4MSGCTL2 0x3EE50U
+#define IDT_SW_SWP5MSGCTL2 0x3EE54U
+#define IDT_SW_SWP6MSGCTL2 0x3EE58U
+#define IDT_SW_SWP7MSGCTL2 0x3EE5CU
+#define IDT_SW_SWP0MSGCTL3 0x3EE60U
+#define IDT_SW_SWP1MSGCTL3 0x3EE64U
+#define IDT_SW_SWP2MSGCTL3 0x3EE68U
+#define IDT_SW_SWP3MSGCTL3 0x3EE6CU
+#define IDT_SW_SWP4MSGCTL3 0x3EE70U
+#define IDT_SW_SWP5MSGCTL3 0x3EE74U
+#define IDT_SW_SWP6MSGCTL3 0x3EE78U
+#define IDT_SW_SWP7MSGCTL3 0x3EE7CU
+/* SMBus Status and Control registers (DWORD) */
+#define IDT_SW_SMBUSSTS 0x3F188U
+#define IDT_SW_SMBUSCTL 0x3F18CU
+/* Serial EEPROM Interface (DWORD) */
+#define IDT_SW_EEPROMINTF 0x3F190U
+/* MBus I/O Expander Address N (DWORD) */
+#define IDT_SW_IOEXPADDR0 0x3F198U
+#define IDT_SW_IOEXPADDR1 0x3F19CU
+#define IDT_SW_IOEXPADDR2 0x3F1A0U
+#define IDT_SW_IOEXPADDR3 0x3F1A4U
+#define IDT_SW_IOEXPADDR4 0x3F1A8U
+#define IDT_SW_IOEXPADDR5 0x3F1ACU
+/* General Purpose Events Control and Status registers (DWORD) */
+#define IDT_SW_GPECTL 0x3F1B0U
+#define IDT_SW_GPESTS 0x3F1B4U
+/* Temperature sensor Control/Status/Alarm/Adjustment/Slope registers */
+#define IDT_SW_TMPCTL 0x3F1D4U
+#define IDT_SW_TMPSTS 0x3F1D8U
+#define IDT_SW_TMPALARM 0x3F1DCU
+#define IDT_SW_TMPADJ 0x3F1E0U
+#define IDT_SW_TSSLOPE 0x3F1E4U
+/* SMBus Configuration Block header log (DWORD) */
+#define IDT_SW_SMBUSCBHL 0x3F1E8U
+
+/*
+ * Common registers related constants
+ * @IDT_REG_ALIGN: Registers alignment used in the driver
+ * @IDT_REG_PCI_MAX: Maximum PCI configuration space register value
+ * @IDT_REG_SW_MAX: Maximum global register value
+ */
+#define IDT_REG_ALIGN 4
+#define IDT_REG_PCI_MAX 0x00FFFU
+#define IDT_REG_SW_MAX 0x3FFFFU
+
+/*
+ * PCICMDSTS register fields related constants
+ * @IDT_PCICMDSTS_IOAE: I/O access enable
+ * @IDT_PCICMDSTS_MAE: Memory access enable
+ * @IDT_PCICMDSTS_BME: Bus master enable
+ */
+#define IDT_PCICMDSTS_IOAE 0x00000001U
+#define IDT_PCICMDSTS_MAE 0x00000002U
+#define IDT_PCICMDSTS_BME 0x00000004U
+
+/*
+ * PCIEDCAP register fields related constants
+ * @IDT_PCIEDCAP_MPAYLOAD_MASK: Maximum payload size mask
+ * @IDT_PCIEDCAP_MPAYLOAD_FLD: Maximum payload size field offset
+ * @IDT_PCIEDCAP_MPAYLOAD_S128: Max supported payload size of 128 bytes
+ * @IDT_PCIEDCAP_MPAYLOAD_S256: Max supported payload size of 256 bytes
+ * @IDT_PCIEDCAP_MPAYLOAD_S512: Max supported payload size of 512 bytes
+ * @IDT_PCIEDCAP_MPAYLOAD_S1024: Max supported payload size of 1024 bytes
+ * @IDT_PCIEDCAP_MPAYLOAD_S2048: Max supported payload size of 2048 bytes
+ */
+#define IDT_PCIEDCAP_MPAYLOAD_MASK 0x00000007U
+#define IDT_PCIEDCAP_MPAYLOAD_FLD 0
+#define IDT_PCIEDCAP_MPAYLOAD_S128 0x00000000U
+#define IDT_PCIEDCAP_MPAYLOAD_S256 0x00000001U
+#define IDT_PCIEDCAP_MPAYLOAD_S512 0x00000002U
+#define IDT_PCIEDCAP_MPAYLOAD_S1024 0x00000003U
+#define IDT_PCIEDCAP_MPAYLOAD_S2048 0x00000004U
+
+/*
+ * PCIEDCTLSTS registers fields related constants
+ * @IDT_PCIEDCTL_MPS_MASK: Maximum payload size mask
+ * @IDT_PCIEDCTL_MPS_FLD: MPS field offset
+ * @IDT_PCIEDCTL_MPS_S128: Max payload size of 128 bytes
+ * @IDT_PCIEDCTL_MPS_S256: Max payload size of 256 bytes
+ * @IDT_PCIEDCTL_MPS_S512: Max payload size of 512 bytes
+ * @IDT_PCIEDCTL_MPS_S1024: Max payload size of 1024 bytes
+ * @IDT_PCIEDCTL_MPS_S2048: Max payload size of 2048 bytes
+ * @IDT_PCIEDCTL_MPS_S4096: Max payload size of 4096 bytes
+ */
+#define IDT_PCIEDCTLSTS_MPS_MASK 0x000000E0U
+#define IDT_PCIEDCTLSTS_MPS_FLD 5
+#define IDT_PCIEDCTLSTS_MPS_S128 0x00000000U
+#define IDT_PCIEDCTLSTS_MPS_S256 0x00000020U
+#define IDT_PCIEDCTLSTS_MPS_S512 0x00000040U
+#define IDT_PCIEDCTLSTS_MPS_S1024 0x00000060U
+#define IDT_PCIEDCTLSTS_MPS_S2048 0x00000080U
+#define IDT_PCIEDCTLSTS_MPS_S4096 0x000000A0U
+
+/*
+ * PCIELCAP register fields related constants
+ * @IDT_PCIELCAP_PORTNUM_MASK: Port number field mask
+ * @IDT_PCIELCAP_PORTNUM_FLD: Port number field offset
+ */
+#define IDT_PCIELCAP_PORTNUM_MASK 0xFF000000U
+#define IDT_PCIELCAP_PORTNUM_FLD 24
+
+/*
+ * PCIELCTLSTS registers fields related constants
+ * @IDT_PCIELSTS_CLS_MASK: Current link speed mask
+ * @IDT_PCIELSTS_CLS_FLD: Current link speed field offset
+ * @IDT_PCIELSTS_NLW_MASK: Negotiated link width mask
+ * @IDT_PCIELSTS_NLW_FLD: Negotiated link width field offset
+ * @IDT_PCIELSTS_SCLK_COM: Common slot clock configuration
+ */
+#define IDT_PCIELCTLSTS_CLS_MASK 0x000F0000U
+#define IDT_PCIELCTLSTS_CLS_FLD 16
+#define IDT_PCIELCTLSTS_NLW_MASK 0x03F00000U
+#define IDT_PCIELCTLSTS_NLW_FLD 20
+#define IDT_PCIELCTLSTS_SCLK_COM 0x10000000U
+
+/*
+ * NTCTL register fields related constants
+ * @IDT_NTCTL_IDPROTDIS: ID Protection check disable (disable MTBL)
+ * @IDT_NTCTL_CPEN: Completion enable
+ * @IDT_NTCTL_RNS: Request no snoop processing (if MTBL disabled)
+ * @IDT_NTCTL_ATP: Address type processing (if MTBL disabled)
+ */
+#define IDT_NTCTL_IDPROTDIS 0x00000001U
+#define IDT_NTCTL_CPEN 0x00000002U
+#define IDT_NTCTL_RNS 0x00000004U
+#define IDT_NTCTL_ATP 0x00000008U
+
+/*
+ * NTINTSTS register fields related constants
+ * @IDT_NTINTSTS_MSG: Message interrupt bit
+ * @IDT_NTINTSTS_DBELL: Doorbell interrupt bit
+ * @IDT_NTINTSTS_SEVENT: Switch Event interrupt bit
+ * @IDT_NTINTSTS_TMPSENSOR: Temperature sensor interrupt bit
+ */
+#define IDT_NTINTSTS_MSG 0x00000001U
+#define IDT_NTINTSTS_DBELL 0x00000002U
+#define IDT_NTINTSTS_SEVENT 0x00000008U
+#define IDT_NTINTSTS_TMPSENSOR 0x00000080U
+
+/*
+ * NTINTMSK register fields related constants
+ * @IDT_NTINTMSK_MSG: Message interrupt mask bit
+ * @IDT_NTINTMSK_DBELL: Doorbell interrupt mask bit
+ * @IDT_NTINTMSK_SEVENT: Switch Event interrupt mask bit
+ * @IDT_NTINTMSK_TMPSENSOR: Temperature sensor interrupt mask bit
+ * @IDT_NTINTMSK_ALL: All the useful interrupts mask
+ */
+#define IDT_NTINTMSK_MSG 0x00000001U
+#define IDT_NTINTMSK_DBELL 0x00000002U
+#define IDT_NTINTMSK_SEVENT 0x00000008U
+#define IDT_NTINTMSK_TMPSENSOR 0x00000080U
+#define IDT_NTINTMSK_ALL \
+ (IDT_NTINTMSK_MSG | IDT_NTINTMSK_DBELL | \
+ IDT_NTINTMSK_SEVENT | IDT_NTINTMSK_TMPSENSOR)
+
+/*
+ * NTGSIGNAL register fields related constants
+ * @IDT_NTGSIGNAL_SET: Set global signal of the local partition
+ */
+#define IDT_NTGSIGNAL_SET 0x00000001U
+
+/*
+ * BARSETUP register fields related constants
+ * @IDT_BARSETUP_TYPE_MASK: Mask of the TYPE field
+ * @IDT_BARSETUP_TYPE_32: 32-bit addressing BAR
+ * @IDT_BARSETUP_TYPE_64: 64-bit addressing BAR
+ * @IDT_BARSETUP_PREF: Value of the BAR prefetchable field
+ * @IDT_BARSETUP_SIZE_MASK: Mask of the SIZE field
+ * @IDT_BARSETUP_SIZE_FLD: SIZE field offset
+ * @IDT_BARSETUP_SIZE_CFG: SIZE field value in case of config space MODE
+ * @IDT_BARSETUP_MODE_CFG: Configuration space BAR mode
+ * @IDT_BARSETUP_ATRAN_MASK: ATRAN field mask
+ * @IDT_BARSETUP_ATRAN_FLD: ATRAN field offset
+ * @IDT_BARSETUP_ATRAN_DIR: Direct address translation memory window
+ * @IDT_BARSETUP_ATRAN_LUT12: 12-entry lookup table
+ * @IDT_BARSETUP_ATRAN_LUT24: 24-entry lookup table
+ * @IDT_BARSETUP_TPART_MASK: TPART field mask
+ * @IDT_BARSETUP_TPART_FLD: TPART field offset
+ * @IDT_BARSETUP_EN: BAR enable bit
+ */
+#define IDT_BARSETUP_TYPE_MASK 0x00000006U
+#define IDT_BARSETUP_TYPE_FLD 0
+#define IDT_BARSETUP_TYPE_32 0x00000000U
+#define IDT_BARSETUP_TYPE_64 0x00000004U
+#define IDT_BARSETUP_PREF 0x00000008U
+#define IDT_BARSETUP_SIZE_MASK 0x000003F0U
+#define IDT_BARSETUP_SIZE_FLD 4
+#define IDT_BARSETUP_SIZE_CFG 0x000000C0U
+#define IDT_BARSETUP_MODE_CFG 0x00000400U
+#define IDT_BARSETUP_ATRAN_MASK 0x00001800U
+#define IDT_BARSETUP_ATRAN_FLD 11
+#define IDT_BARSETUP_ATRAN_DIR 0x00000000U
+#define IDT_BARSETUP_ATRAN_LUT12 0x00000800U
+#define IDT_BARSETUP_ATRAN_LUT24 0x00001000U
+#define IDT_BARSETUP_TPART_MASK 0x0000E000U
+#define IDT_BARSETUP_TPART_FLD 13
+#define IDT_BARSETUP_EN 0x80000000U
+
+/*
+ * NTMTBLDATA register fields related constants
+ * @IDT_NTMTBLDATA_VALID: Set the MTBL entry being valid
+ * @IDT_NTMTBLDATA_REQID_MASK: Bus:Device:Function field mask
+ * @IDT_NTMTBLDATA_REQID_FLD: Bus:Device:Function field offset
+ * @IDT_NTMTBLDATA_PART_MASK: Partition field mask
+ * @IDT_NTMTBLDATA_PART_FLD: Partition field offset
+ * @IDT_NTMTBLDATA_ATP_TRANS: Enable AT field translation on request TLPs
+ * @IDT_NTMTBLDATA_CNS_INV: Enable No Snoop attribute inversion of
+ * Completion TLPs
+ * @IDT_NTMTBLDATA_RNS_INV: Enable No Snoop attribute inversion of
+ * Request TLPs
+ */
+#define IDT_NTMTBLDATA_VALID 0x00000001U
+#define IDT_NTMTBLDATA_REQID_MASK 0x0001FFFEU
+#define IDT_NTMTBLDATA_REQID_FLD 1
+#define IDT_NTMTBLDATA_PART_MASK 0x000E0000U
+#define IDT_NTMTBLDATA_PART_FLD 17
+#define IDT_NTMTBLDATA_ATP_TRANS 0x20000000U
+#define IDT_NTMTBLDATA_CNS_INV 0x40000000U
+#define IDT_NTMTBLDATA_RNS_INV 0x80000000U
+
+/*
+ * REQIDCAP register fields related constants
+ * @IDT_REQIDCAP_REQID_MASK: Request ID field mask
+ * @IDT_REQIDCAP_REQID_FLD: Request ID field offset
+ */
+#define IDT_REQIDCAP_REQID_MASK 0x0000FFFFU
+#define IDT_REQIDCAP_REQID_FLD 0
+
+/*
+ * LUTOFFSET register fields related constants
+ * @IDT_LUTOFFSET_INDEX_MASK: Lookup table index field mask
+ * @IDT_LUTOFFSET_INDEX_FLD: Lookup table index field offset
+ * @IDT_LUTOFFSET_BAR_MASK: Lookup table BAR select field mask
+ * @IDT_LUTOFFSET_BAR_FLD: Lookup table BAR select field offset
+ */
+#define IDT_LUTOFFSET_INDEX_MASK 0x0000001FU
+#define IDT_LUTOFFSET_INDEX_FLD 0
+#define IDT_LUTOFFSET_BAR_MASK 0x00000700U
+#define IDT_LUTOFFSET_BAR_FLD 8
+
+/*
+ * LUTUDATA register fields related constants
+ * @IDT_LUTUDATA_PART_MASK: Partition field mask
+ * @IDT_LUTUDATA_PART_FLD: Partition field offset
+ * @IDT_LUTUDATA_VALID: Lookup table entry valid bit
+ */
+#define IDT_LUTUDATA_PART_MASK 0x0000000FU
+#define IDT_LUTUDATA_PART_FLD 0
+#define IDT_LUTUDATA_VALID 0x80000000U
+
+/*
+ * SWPARTxSTS register fields related constants
+ * @IDT_SWPARTxSTS_SCI: Switch partition state change initiated
+ * @IDT_SWPARTxSTS_SCC: Switch partition state change completed
+ * @IDT_SWPARTxSTS_STATE_MASK: Switch partition state mask
+ * @IDT_SWPARTxSTS_STATE_FLD: Switch partition state field offset
+ * @IDT_SWPARTxSTS_STATE_DIS: Switch partition disabled
+ * @IDT_SWPARTxSTS_STATE_ACT: Switch partition enabled
+ * @IDT_SWPARTxSTS_STATE_RES: Switch partition in reset
+ * @IDT_SWPARTxSTS_US: Switch partition has upstream port
+ * @IDT_SWPARTxSTS_USID_MASK: Switch partition upstream port ID mask
+ * @IDT_SWPARTxSTS_USID_FLD: Switch partition upstream port ID field offset
+ * @IDT_SWPARTxSTS_NT: Upstream port has NT function
+ * @IDT_SWPARTxSTS_DMA: Upstream port has DMA function
+ */
+#define IDT_SWPARTxSTS_SCI 0x00000001U
+#define IDT_SWPARTxSTS_SCC 0x00000002U
+#define IDT_SWPARTxSTS_STATE_MASK 0x00000060U
+#define IDT_SWPARTxSTS_STATE_FLD 5
+#define IDT_SWPARTxSTS_STATE_DIS 0x00000000U
+#define IDT_SWPARTxSTS_STATE_ACT 0x00000020U
+#define IDT_SWPARTxSTS_STATE_RES 0x00000060U
+#define IDT_SWPARTxSTS_US 0x00000100U
+#define IDT_SWPARTxSTS_USID_MASK 0x00003E00U
+#define IDT_SWPARTxSTS_USID_FLD 9
+#define IDT_SWPARTxSTS_NT 0x00004000U
+#define IDT_SWPARTxSTS_DMA 0x00008000U
+
+/*
+ * SWPORTxSTS register fields related constants
+ * @IDT_SWPORTxSTS_OMCI: Operation mode change initiated
+ * @IDT_SWPORTxSTS_OMCC: Operation mode change completed
+ * @IDT_SWPORTxSTS_LINKUP: Link up status
+ * @IDT_SWPORTxSTS_DS: Port lanes behave as downstream lanes
+ * @IDT_SWPORTxSTS_MODE_MASK: Port mode field mask
+ * @IDT_SWPORTxSTS_MODE_FLD: Port mode field offset
+ * @IDT_SWPORTxSTS_MODE_DIS: Port mode - disabled
+ * @IDT_SWPORTxSTS_MODE_DS: Port mode - downstream switch port
+ * @IDT_SWPORTxSTS_MODE_US: Port mode - upstream switch port
+ * @IDT_SWPORTxSTS_MODE_NT: Port mode - NT function
+ * @IDT_SWPORTxSTS_MODE_USNT: Port mode - upstream switch port with NTB
+ * @IDT_SWPORTxSTS_MODE_UNAT: Port mode - unattached
+ * @IDT_SWPORTxSTS_MODE_USDMA: Port mode - upstream switch port with DMA
+ * @IDT_SWPORTxSTS_MODE_USNTDMA:Port mode - upstream port with NTB and DMA
+ * @IDT_SWPORTxSTS_MODE_NTDMA: Port mode - NT function with DMA
+ * @IDT_SWPORTxSTS_SWPART_MASK: Port partition field mask
+ * @IDT_SWPORTxSTS_SWPART_FLD: Port partition field offset
+ * @IDT_SWPORTxSTS_DEVNUM_MASK: Port device number field mask
+ * @IDT_SWPORTxSTS_DEVNUM_FLD: Port device number field offset
+ */
+#define IDT_SWPORTxSTS_OMCI 0x00000001U
+#define IDT_SWPORTxSTS_OMCC 0x00000002U
+#define IDT_SWPORTxSTS_LINKUP 0x00000010U
+#define IDT_SWPORTxSTS_DS 0x00000020U
+#define IDT_SWPORTxSTS_MODE_MASK 0x000003C0U
+#define IDT_SWPORTxSTS_MODE_FLD 6
+#define IDT_SWPORTxSTS_MODE_DIS 0x00000000U
+#define IDT_SWPORTxSTS_MODE_DS 0x00000040U
+#define IDT_SWPORTxSTS_MODE_US 0x00000080U
+#define IDT_SWPORTxSTS_MODE_NT 0x000000C0U
+#define IDT_SWPORTxSTS_MODE_USNT 0x00000100U
+#define IDT_SWPORTxSTS_MODE_UNAT 0x00000140U
+#define IDT_SWPORTxSTS_MODE_USDMA 0x00000180U
+#define IDT_SWPORTxSTS_MODE_USNTDMA 0x000001C0U
+#define IDT_SWPORTxSTS_MODE_NTDMA 0x00000200U
+#define IDT_SWPORTxSTS_SWPART_MASK 0x00001C00U
+#define IDT_SWPORTxSTS_SWPART_FLD 10
+#define IDT_SWPORTxSTS_DEVNUM_MASK 0x001F0000U
+#define IDT_SWPORTxSTS_DEVNUM_FLD 16
+
+/*
+ * SEMSK register fields related constants
+ * @IDT_SEMSK_LINKUP: Link Up event mask bit
+ * @IDT_SEMSK_LINKDN: Link Down event mask bit
+ * @IDT_SEMSK_GSIGNAL: Global Signal event mask bit
+ */
+#define IDT_SEMSK_LINKUP 0x00000001U
+#define IDT_SEMSK_LINKDN 0x00000002U
+#define IDT_SEMSK_GSIGNAL 0x00000020U
+
+/*
+ * SWPxMSGCTL register fields related constants
+ * @IDT_SWPxMSGCTL_REG_MASK: Register select field mask
+ * @IDT_SWPxMSGCTL_REG_FLD: Register select field offset
+ * @IDT_SWPxMSGCTL_PART_MASK: Partition select field mask
+ * @IDT_SWPxMSGCTL_PART_FLD: Partition select field offset
+ */
+#define IDT_SWPxMSGCTL_REG_MASK 0x00000003U
+#define IDT_SWPxMSGCTL_REG_FLD 0
+#define IDT_SWPxMSGCTL_PART_MASK 0x00000070U
+#define IDT_SWPxMSGCTL_PART_FLD 4
+
+/*
+ * TMPSTS register fields related constants
+ * @IDT_TMPSTS_TEMP_MASK: Current temperature field mask
+ * @IDT_TMPSTS_TEMP_FLD: Current temperature field offset
+ */
+#define IDT_TMPSTS_TEMP_MASK 0x000000FFU
+#define IDT_TMPSTS_TEMP_FLD 0
+
+/*
+ * Helper macro to get/set the corresponding field value
+ * @GET_FIELD: Retrieve the value of the corresponding field
+ * @SET_FIELD: Set the specified field up
+ * @IS_FLD_SET: Check whether a field is set with value
+ */
+#define GET_FIELD(field, data) \
+ (((u32)(data) & IDT_ ##field## _MASK) >> IDT_ ##field## _FLD)
+#define SET_FIELD(field, data, value) \
+ (((u32)(data) & ~IDT_ ##field## _MASK) | \
+ ((u32)(value) << IDT_ ##field## _FLD))
+#define IS_FLD_SET(field, data, value) \
+ (((u32)(data) & IDT_ ##field## _MASK) == IDT_ ##field## _ ##value)
+
+/*
+ * Useful registers masks:
+ * @IDT_DBELL_MASK: Doorbell bits mask
+ * @IDT_OUTMSG_MASK: Out messages status bits mask
+ * @IDT_INMSG_MASK: In messages status bits mask
+ * @IDT_MSG_MASK: Any message status bits mask
+ */
+#define IDT_DBELL_MASK ((u32)0xFFFFFFFFU)
+#define IDT_OUTMSG_MASK ((u32)0x0000000FU)
+#define IDT_INMSG_MASK ((u32)0x000F0000U)
+#define IDT_MSG_MASK (IDT_INMSG_MASK | IDT_OUTMSG_MASK)
+
+/*
+ * Number of IDT NTB resources:
+ * @IDT_MSG_CNT: Number of Message registers
+ * @IDT_BAR_CNT: Number of BARs of each port
+ * @IDT_MTBL_ENTRY_CNT: Number mapping table entries
+ */
+#define IDT_MSG_CNT 4
+#define IDT_BAR_CNT 6
+#define IDT_MTBL_ENTRY_CNT 64
+
+/*
+ * General IDT PCIe-switch constant
+ * @IDT_MAX_NR_PORTS: Maximum number of ports per IDT PCIe-switch
+ * @IDT_MAX_NR_PARTS: Maximum number of partitions per IDT PCIe-switch
+ * @IDT_MAX_NR_PEERS: Maximum number of NT-peers per IDT PCIe-switch
+ * @IDT_MAX_NR_MWS: Maximum number of Memory Widows
+ * @IDT_PCIE_REGSIZE: Size of the registers in bytes
+ * @IDT_TRANS_ALIGN: Alignment of translated base address
+ * @IDT_DIR_SIZE_ALIGN: Alignment of size setting for direct translated MWs.
+ * Even though the lower 10 bits are reserved, they are
+ * treated by IDT as one's so basically there is no any
+ * alignment of size limit for DIR address translation.
+ */
+#define IDT_MAX_NR_PORTS 24
+#define IDT_MAX_NR_PARTS 8
+#define IDT_MAX_NR_PEERS 8
+#define IDT_MAX_NR_MWS 29
+#define IDT_PCIE_REGSIZE 4
+#define IDT_TRANS_ALIGN 4
+#define IDT_DIR_SIZE_ALIGN 1
+
+/*
+ * IDT Memory Windows type. Depending on the device settings, IDT supports
+ * Direct Address Translation MW registers and Lookup Table registers
+ * @IDT_MW_DIR: Direct address translation
+ * @IDT_MW_LUT12: 12-entry lookup table entry
+ * @IDT_MW_LUT24: 24-entry lookup table entry
+ *
+ * NOTE These values are exactly the same as one of the BARSETUP ATRAN field
+ */
+enum idt_mw_type {
+ IDT_MW_DIR = 0x0,
+ IDT_MW_LUT12 = 0x1,
+ IDT_MW_LUT24 = 0x2
+};
+
+/*
+ * IDT PCIe-switch model private data
+ * @name: Device name
+ * @port_cnt: Total number of NT endpoint ports
+ * @ports: Port ids
+ */
+struct idt_89hpes_cfg {
+ char *name;
+ unsigned char port_cnt;
+ unsigned char ports[];
+};
+
+/*
+ * Memory window configuration structure
+ * @type: Type of the memory window (direct address translation or lookup
+ * table)
+ *
+ * @bar: PCIe BAR the memory window referenced to
+ * @idx: Index of the memory window within the BAR
+ *
+ * @addr_align: Alignment of translated address
+ * @size_align: Alignment of memory window size
+ * @size_max: Maximum size of memory window
+ */
+struct idt_mw_cfg {
+ enum idt_mw_type type;
+
+ unsigned char bar;
+ unsigned char idx;
+
+ u64 addr_align;
+ u64 size_align;
+ u64 size_max;
+};
+
+/*
+ * Description structure of peer IDT NT-functions:
+ * @port: NT-function port
+ * @part: NT-function partition
+ *
+ * @mw_cnt: Number of memory windows supported by NT-function
+ * @mws: Array of memory windows descriptors
+ */
+struct idt_ntb_peer {
+ unsigned char port;
+ unsigned char part;
+
+ unsigned char mw_cnt;
+ struct idt_mw_cfg *mws;
+};
+
+/*
+ * Description structure of local IDT NT-function:
+ * @ntb: Linux NTB-device description structure
+ * @swcfg: Pointer to the structure of local IDT PCIe-switch
+ * specific cofnfigurations
+ *
+ * @port: Local NT-function port
+ * @part: Local NT-function partition
+ *
+ * @peer_cnt: Number of peers with activated NTB-function
+ * @peers: Array of peers descripting structures
+ * @port_idx_map: Map of port number -> peer index
+ * @part_idx_map: Map of partition number -> peer index
+ *
+ * @mtbl_lock: Mapping table access lock
+ *
+ * @mw_cnt: Number of memory windows supported by NT-function
+ * @mws: Array of memory windows descriptors
+ * @lut_lock: Lookup table access lock
+ *
+ * @msg_locks: Message registers mapping table lockers
+ *
+ * @cfgspc: Virtual address of the memory mapped configuration
+ * space of the NT-function
+ * @db_mask_lock: Doorbell mask register lock
+ * @msg_mask_lock: Message mask register lock
+ * @gasa_lock: GASA registers access lock
+ *
+ * @dbgfs_info: DebugFS info node
+ */
+struct idt_ntb_dev {
+ struct ntb_dev ntb;
+ struct idt_89hpes_cfg *swcfg;
+
+ unsigned char port;
+ unsigned char part;
+
+ unsigned char peer_cnt;
+ struct idt_ntb_peer peers[IDT_MAX_NR_PEERS];
+ char port_idx_map[IDT_MAX_NR_PORTS];
+ char part_idx_map[IDT_MAX_NR_PARTS];
+
+ spinlock_t mtbl_lock;
+
+ unsigned char mw_cnt;
+ struct idt_mw_cfg *mws;
+ spinlock_t lut_lock;
+
+ spinlock_t msg_locks[IDT_MSG_CNT];
+
+ void __iomem *cfgspc;
+ spinlock_t db_mask_lock;
+ spinlock_t msg_mask_lock;
+ spinlock_t gasa_lock;
+
+ struct dentry *dbgfs_info;
+};
+#define to_ndev_ntb(__ntb) container_of(__ntb, struct idt_ntb_dev, ntb)
+
+/*
+ * Descriptor of the IDT PCIe-switch BAR resources
+ * @setup: BAR setup register
+ * @limit: BAR limit register
+ * @ltbase: Lower translated base address
+ * @utbase: Upper translated base address
+ */
+struct idt_ntb_bar {
+ unsigned int setup;
+ unsigned int limit;
+ unsigned int ltbase;
+ unsigned int utbase;
+};
+
+/*
+ * Descriptor of the IDT PCIe-switch message resources
+ * @in: Inbound message register
+ * @out: Outbound message register
+ * @src: Source of inbound message register
+ */
+struct idt_ntb_msg {
+ unsigned int in;
+ unsigned int out;
+ unsigned int src;
+};
+
+/*
+ * Descriptor of the IDT PCIe-switch NT-function specific parameters in the
+ * PCI Configuration Space
+ * @bars: BARs related registers
+ * @msgs: Messaging related registers
+ */
+struct idt_ntb_regs {
+ struct idt_ntb_bar bars[IDT_BAR_CNT];
+ struct idt_ntb_msg msgs[IDT_MSG_CNT];
+};
+
+/*
+ * Descriptor of the IDT PCIe-switch port specific parameters in the
+ * Global Configuration Space
+ * @pcicmdsts: PCI command/status register
+ * @pcielctlsts: PCIe link control/status
+ *
+ * @ctl: Port control register
+ * @sts: Port status register
+ *
+ * @bars: BARs related registers
+ */
+struct idt_ntb_port {
+ unsigned int pcicmdsts;
+ unsigned int pcielctlsts;
+ unsigned int ntctl;
+
+ unsigned int ctl;
+ unsigned int sts;
+
+ struct idt_ntb_bar bars[IDT_BAR_CNT];
+};
+
+/*
+ * Descriptor of the IDT PCIe-switch partition specific parameters.
+ * @ctl: Partition control register in the Global Address Space
+ * @sts: Partition status register in the Global Address Space
+ * @msgctl: Messages control registers
+ */
+struct idt_ntb_part {
+ unsigned int ctl;
+ unsigned int sts;
+ unsigned int msgctl[IDT_MSG_CNT];
+};
+
+#endif /* NTB_HW_IDT_H */
--
2.6.6

Next message: Steven Rostedt: "[PATCH RT 2/7] x86/mm/cpa: avoid wbinvd() for PREEMPT"
Previous message: Hon Ching(Vicky) Lo: "Re: [tpmdd-devel] [PATCH] vTPM: Fix missing NULL check"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]