[PATCH v2 0/8] thermal: ti-soc-thermal: Migrate slope/offset data to device tree

[Keerthy]

Currently the slope and offset values for calculating the
hot spot temperature of a particular thermal zone is part
of driver data. Pass them here instead and obtain the values
while of node parsing.

Tested for the slope and constant values on DRA7-EVM, OMAP3-BEAGLE. 

Changes in v2:

  * Added OMAP3 changes along with DRA7/OMAP4/OMAP5.

Keerthy (8):
  arm: dts: omap3: Add cpu_thermal zone
  ARM: DRA7: Thermal: Add slope and offset values
  ARM: OMAP5: Thermal: Add slope and offset values
  ARM: OMAP443x: Thermal: Add slope and offset values
  ARM: OMAP4460: Thermal: Add slope and offset values
  thermal: ti-soc-thermal: Fetch slope and offset from DT
  thermal: ti-soc-thermal: Remove redundant constants
  thermal: ti-soc-thermal: Remove redundant code

 arch/arm/boot/dts/dra7.dtsi                        |  17 +++
 arch/arm/boot/dts/omap3-cpu-thermal.dtsi           |  20 +++
 arch/arm/boot/dts/omap34xx.dtsi                    |   8 +-
 arch/arm/boot/dts/omap36xx.dtsi                    |   8 +-
 arch/arm/boot/dts/omap443x.dtsi                    |   4 +
 arch/arm/boot/dts/omap4460.dtsi                    |   4 +
 arch/arm/boot/dts/omap5.dtsi                       |   9 ++
 .../thermal/ti-soc-thermal/dra752-thermal-data.c   |  10 --
 .../thermal/ti-soc-thermal/omap3-thermal-data.c    |   4 -
 .../thermal/ti-soc-thermal/omap4-thermal-data.c    |   6 -
 .../thermal/ti-soc-thermal/omap5-thermal-data.c    |   4 -
 drivers/thermal/ti-soc-thermal/ti-bandgap.h        |   4 -
 drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 158 +--------------------
 drivers/thermal/ti-soc-thermal/ti-thermal.h        |  16 ---
 14 files changed, 71 insertions(+), 201 deletions(-)
 create mode 100644 arch/arm/boot/dts/omap3-cpu-thermal.dtsi

-- 
1.9.1