[PATCH 4.9 120/153] rtlwifi: Fix alignment issues
From: Greg Kroah-Hartman
Date: Fri Mar 10 2017 - 04:24:12 EST
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
commit 40b368af4b750863b2cb66a3a9513241db2f0793 upstream.
The addresses of Wlan NIC registers are natural alignment, but some
drivers have bugs. These are evident on platforms that need natural
alignment to access registers. This change contains the following:
1. Function _rtl8821ae_dbi_read() is used to read one byte from DBI,
thus it should use rtl_read_byte().
2. Register 0x4C7 of 8192ee is single byte.
Signed-off-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/wireless/realtek/rtlwifi/rtl8192ee/hw.c | 2 +-
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/hw.c
@@ -1006,7 +1006,7 @@ static void _rtl92ee_hw_configure(struct
rtl_write_word(rtlpriv, REG_SIFS_TRX, 0x100a);
/* Note Data sheet don't define */
- rtl_write_word(rtlpriv, 0x4C7, 0x80);
+ rtl_write_byte(rtlpriv, 0x4C7, 0x80);
rtl_write_byte(rtlpriv, REG_RX_PKT_LIMIT, 0x20);
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
@@ -1128,7 +1128,7 @@ static u8 _rtl8821ae_dbi_read(struct rtl
}
if (0 == tmp) {
read_addr = REG_DBI_RDATA + addr % 4;
- ret = rtl_read_word(rtlpriv, read_addr);
+ ret = rtl_read_byte(rtlpriv, read_addr);
}
return ret;
}