[PATCH v3] staging: comedi: amplc_pci224: Convert macro GAT_CONFIG to static inline function

[simran singhal]

Convert macro GAT_CONFIG to static inline function as static inline
functions are preferred over macros. This change is possible since the
arguments at all call sites have the same type.

The uses were updated with Coccinelle:

@r1@
expression dev,reg,chan,src;
@@
-GAT_CONFIG(chan, src)
+pci224_gat_config(chan, src)

Also, the comment describing the macro has been removed.

Signed-off-by: simran singhal <singhalsimran0@xxxxxxxxx>
---
 
 v3:
   -Change the commit message.
  
 drivers/staging/comedi/drivers/amplc_pci224.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/comedi/drivers/amplc_pci224.c b/drivers/staging/comedi/drivers/amplc_pci224.c
index 2e6decf..07555cf 100644
--- a/drivers/staging/comedi/drivers/amplc_pci224.c
+++ b/drivers/staging/comedi/drivers/amplc_pci224.c
@@ -216,8 +216,12 @@
 #define GAT_GND		1	/* GND (i.e. disabled) */
 #define GAT_EXT		2	/* reserved (external gate input) */
 #define GAT_NOUTNM2	3	/* inverted output of channel-2 modulo total */
-/* Macro to construct gate input configuration register value. */
-#define GAT_CONFIG(chan, src)	((((chan) & 3) << 3) | ((src) & 7))
+
+static inline unsigned int pci224_gat_config(unsigned int chan,
+					     unsigned int src)
+{
+	return ((chan & 3) << 3) | (src & 7);
+}
 
 /*
  * Summary of CLK_OUTNM1 and GAT_NOUTNM2 connections for PCI224 and PCI234:
@@ -817,10 +821,10 @@ static void pci224_ao_start_pacer(struct comedi_device *dev,
 	 * source.
 	 */
 	/* Make sure Z2-0 is gated on.  */
-	outb(GAT_CONFIG(0, GAT_VCC), devpriv->iobase1 + PCI224_ZGAT_SCE);
+	outb(pci224_gat_config(0, GAT_VCC), devpriv->iobase1 + PCI224_ZGAT_SCE);
 	/* Cascading with Z2-2. */
 	/* Make sure Z2-2 is gated on.  */
-	outb(GAT_CONFIG(2, GAT_VCC), devpriv->iobase1 + PCI224_ZGAT_SCE);
+	outb(pci224_gat_config(2, GAT_VCC), devpriv->iobase1 + PCI224_ZGAT_SCE);
 	/* Z2-2 needs 10 MHz clock. */
 	outb(CLK_CONFIG(2, CLK_10MHZ), devpriv->iobase1 + PCI224_ZCLK_SCE);
 	/* Z2-0 is clocked from Z2-2's output. */
-- 
2.7.4