[PATCH V7 0/7] LPC: legacy ISA I/O support

From: zhichang.yuan
Date: Sun Mar 12 2017 - 22:19:11 EST


This patchset supports the IPMI-bt device attached to the Low-Pin-Count
interface implemented on Hisilicon Hip06/Hip07 SoC.
-----------
| LPC host|
| |
-----------
|
_____________V_______________LPC
| |
V V
------------
| BT(ipmi)|
------------

When master accesses those peripherals beneath the Hip06/Hip07 LPC, a specific
LPC driver is needed to make LPC host generate the standard LPC I/O cycles with
the target peripherals'I/O port addresses. But on curent arm64 world, there is
no real I/O accesses. All the I/O operations through in/out pair are based on
MMIO which is not satisfied the I/O mechanism on Hip06/Hip07 LPC.
To solve this issue and keep the relevant existing peripherals' driver
untouched, this patchset implements:
- introduces a generic I/O space management framwork, LIBIO, to support I/O
operations of both MMIO buses and the host controllers which access their
peripherals with host local I/O addresses;
- redefines the in/out accessors to provide unified interfaces for MMIO and
legacy I/O. Based on the LIBIO, the calling of in/out() from upper-layer
drivers, such as ipmi-si, will be redirected to the corresponding
device-specific I/O hooks to perfrom the I/O accesses.
Based on this patch-set, all the I/O accesses to Hip06/Hip07 LPC peripherals
can be supported without any changes on the existing ipmi-si driver.

Changes from V6:
- According to the comments from Bjorn and Alex, merge PCI IO and indirect-IO
into a generic I/O space management, LIBIO;
- Adopted the '_DEP' to replace the platform bus notifier. In this way, we
can ensure the LPC peripherals' I/O resources had been translated to
logical IO before the LPC peripheral enumeration;
- Replaced the rwlock with rcu list based on Alex's suggestion;
- Applied relaxed write/read to LPC driver;
- Some bugs fixing and some optimazations based on the comments of V6;

Changes from V5:
- Made the extio driver more generic and locate in lib/;
- Supported multiple indirect-IO bus instances;
- Extended the pci_register_io_range() to support indirect-IO, then dropped
the I/O reservation used in previous patchset;
- Reimplemented the ACPI LPC support;
- Fixed some bugs, including the compile error on other archs, the module
building failure found by Ming Lei, etc;

Changes from V4:
- Some revises based on the comments from Bjorn, Rob on V4;
- Fixed the compile error on some platforms, such as openrisc;

Changes from V3:
- UART support deferred to a separate patchset; This patchset only support
ipmi device under LPC;
- LPC bus I/O range is fixed to 0 ~ (PCIBIOS_MIN_IO - 1), which is separeted
from PCI/PCIE PIO space;
- Based on Arnd's remarks, removed the ranges property from Hip06 lpc dts and
added a new fixup function, of_isa_indirect_io(), to get the I/O address
directly from LPC dts configurations;
- Support in(w,l)/out(w,l) for Hip06 lpc I/O;
- Decouple the header file dependency on the gerenic io.h by defining in/out
as normal functions in c file;
- removed unused macro definitions in the LPC driver;

Changes from V2:
- Support the PIO retrieval from the linux PIO generated by
pci_address_to_pio. This method replace the 4K PIO reservation in V2;
- Support the flat-tree earlycon;
- Some revises based on Arnd's remarks;
- Make sure the linux PIO range allocated to Hip06 LPC peripherals starts
from non-ZERO;

Changes from V1:
- Support the ACPI LPC device;
- Optimize the dts LPC driver in ISA compatible mode;
- Reserve the IO range below 4K in avoid the possible conflict with PCI host
IO ranges;
- Support the LPC uart and relevant earlycon;

v6 thread here: https://lkml.org/lkml/2017/1/24/25
v5 thread here: https://lkml.org/lkml/2016/11/7/955
v4 thread here: https://lkml.org/lkml/2016/10/20/149
v3 thread here: https://lkml.org/lkml/2016/9/14/326
v2 thread here: https://lkml.org/lkml/2016/9/7/356
v1 thread here: https://lkml.org/lkml/2015/12/29/154


Signed-off-by: Zhichang Yuan <yuanzhichang@xxxxxxxxxxxxx>
zhichang.yuan (7):
LIBIO: Introduce a generic PIO mapping method
PCI: Apply the new generic I/O management on PCI IO hosts
OF: Add missing I/O range exception for indirect-IO devices
LPC: Support the device-tree LPC host on Hip06/Hip07
ACPI: Delay the enumeration on the devices whose dependency has not
met
LIBIO: Support the dynamically logical PIO registration of ACPI host
I/O
LPC: Add the ACPI LPC support

.../arm/hisilicon/hisilicon-low-pin-count.txt | 33 ++
MAINTAINERS | 8 +
arch/arm64/boot/dts/hisilicon/hip06-d03.dts | 4 +
arch/arm64/boot/dts/hisilicon/hip06.dtsi | 14 +
arch/arm64/boot/dts/hisilicon/hip07-d05.dts | 4 +
arch/arm64/boot/dts/hisilicon/hip07.dtsi | 14 +
drivers/acpi/battery.c | 3 -
drivers/acpi/pci_root.c | 8 +-
drivers/acpi/scan.c | 3 +
drivers/bus/Kconfig | 8 +
drivers/bus/Makefile | 1 +
drivers/bus/hisi_lpc.c | 608 +++++++++++++++++++++
drivers/of/address.c | 94 +++-
drivers/pci/pci.c | 96 +---
include/asm-generic/io.h | 50 ++
include/linux/io.h | 1 +
include/linux/libio.h | 98 ++++
include/linux/pci.h | 3 +-
lib/Kconfig | 14 +
lib/Makefile | 2 +
lib/libio.c | 548 +++++++++++++++++++
21 files changed, 1514 insertions(+), 100 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt
create mode 100644 drivers/bus/hisi_lpc.c
create mode 100644 include/linux/libio.h
create mode 100644 lib/libio.c

--
1.9.1