Re: [PATCH 1/3] ARM64: dts: meson-gx: Finally move common nodes to GX dtsi

From: Neil Armstrong
Date: Mon Mar 13 2017 - 05:03:55 EST


On 03/11/2017 01:23 AM, Kevin Hilman wrote:
> Neil Armstrong <narmstrong@xxxxxxxxxxxx> writes:
>
>> Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
>
> Could use a bit more changelog here (probably what you have in the cover
> letter.)

Oops, sent the wrong files...

Will resend the patchset with changelog for patches 1 and 3.

Neil

>
> Otherwise, looks good. Thanks for the cleanup.
>
> Kevin
>
>> ---
>> arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 24 ++++++++++++++++
>> arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 43 ++++++-----------------------
>> arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 8 ++++++
>> 3 files changed, 40 insertions(+), 35 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>> index 5d995f7..2d8dc6f 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>> @@ -296,6 +296,14 @@
>> status = "disabled";
>> };
>>
>> + spifc: spi@8c80 {
>> + compatible = "amlogic,meson-gxbb-spifc";
>> + reg = <0x0 0x08c80 0x0 0x80>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> watchdog@98d0 {
>> compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt";
>> reg = <0x0 0x098d0 0x0 0x10>;
>> @@ -342,6 +350,13 @@
>> #size-cells = <2>;
>> ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
>>
>> + clkc_AO: clock-controller@040 {
>> + compatible = "amlogic,gx-aoclkc", "amlogic,gxbb-aoclkc";
>> + reg = <0x0 0x00040 0x0 0x4>;
>> + #clock-cells = <1>;
>> + #reset-cells = <1>;
>> + };
>> +
>> uart_AO: serial@4c0 {
>> compatible = "amlogic,meson-uart";
>> reg = <0x0 0x004c0 0x0 0x14>;
>> @@ -358,6 +373,15 @@
>> status = "disabled";
>> };
>>
>> + i2c_AO: i2c@500 {
>> + compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
>> + reg = <0x0 0x500 0x0 0x20>;
>> + interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "disabled";
>> + };
>> +
>> pwm_AO_ab: pwm@550 {
>> compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
>> reg = <0x0 0x00550 0x0 0x10>;
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
>> index 04b3324..c2c41aa 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
>> @@ -97,17 +97,6 @@
>> };
>> };
>>
>> -&cbus {
>> - spifc: spi@8c80 {
>> - compatible = "amlogic,meson-gxbb-spifc";
>> - reg = <0x0 0x08c80 0x0 0x80>;
>> - #address-cells = <1>;
>> - #size-cells = <0>;
>> - clocks = <&clkc CLKID_SPI>;
>> - status = "disabled";
>> - };
>> -};
>> -
>> &ethmac {
>> clocks = <&clkc CLKID_ETH>,
>> <&clkc CLKID_FCLK_DIV2>,
>> @@ -204,30 +193,6 @@
>> };
>> };
>> };
>> -
>> - clkc_AO: clock-controller@040 {
>> - compatible = "amlogic,gxbb-aoclkc";
>> - reg = <0x0 0x00040 0x0 0x4>;
>> - #clock-cells = <1>;
>> - #reset-cells = <1>;
>> - };
>> -
>> - pwm_ab_AO: pwm@550 {
>> - compatible = "amlogic,meson-gxbb-pwm";
>> - reg = <0x0 0x0550 0x0 0x10>;
>> - #pwm-cells = <3>;
>> - status = "disabled";
>> - };
>> -
>> - i2c_AO: i2c@500 {
>> - compatible = "amlogic,meson-gxbb-i2c";
>> - reg = <0x0 0x500 0x0 0x20>;
>> - interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
>> - clocks = <&clkc CLKID_AO_I2C>;
>> - #address-cells = <1>;
>> - #size-cells = <0>;
>> - status = "disabled";
>> - };
>> };
>>
>> &periphs {
>> @@ -482,6 +447,10 @@
>> clocks = <&clkc CLKID_I2C>;
>> };
>>
>> +&i2c_AO {
>> + clocks = <&clkc CLKID_AO_I2C>;
>> +};
>> +
>> &i2c_B {
>> clocks = <&clkc CLKID_I2C>;
>> };
>> @@ -521,6 +490,10 @@
>> clock-names = "core", "clkin0", "clkin1";
>> };
>>
>> +&spifc {
>> + clocks = <&clkc CLKID_SPI>;
>> +};
>> +
>> &vpu {
>> compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
>> };
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
>> index 17cd546..37ed7a0 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
>> @@ -427,6 +427,10 @@
>> clocks = <&clkc CLKID_I2C>;
>> };
>>
>> +&i2c_AO {
>> + clocks = <&clkc CLKID_AO_I2C>;
>> +};
>> +
>> &i2c_B {
>> clocks = <&clkc CLKID_I2C>;
>> };
>> @@ -466,6 +470,10 @@
>> clock-names = "core", "clkin0", "clkin1";
>> };
>>
>> +&spifc {
>> + clocks = <&clkc CLKID_SPI>;
>> +};
>> +
>> &vpu {
>> compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
>> };