[PATCH 3.12 22/60] scsi: storvsc: properly set residual data length on errors

[Jiri Slaby]

From: Long Li <longli@xxxxxxxxxxxxx>

3.12-stable review patch.  If anyone has any objections, please let me know.

===============

commit 40630f462824ee24bc00d692865c86c3828094e0 upstream.

On I/O errors, the Windows driver doesn't set data_transfer_length
on error conditions other than SRB_STATUS_DATA_OVERRUN.
In these cases we need to set data_transfer_length to 0,
indicating there is no data transferred. On SRB_STATUS_DATA_OVERRUN,
data_transfer_length is set by the Windows driver to the actual data transferred.

Reported-by: Shiva Krishna <Shiva.Krishna@xxxxxxxxxxxxxxxxx>
Signed-off-by: Long Li <longli@xxxxxxxxxxxxx>
Reviewed-by: K. Y. Srinivasan <kys@xxxxxxxxxxxxx>
Signed-off-by: K. Y. Srinivasan <kys@xxxxxxxxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Jiri Slaby <jslaby@xxxxxxx>
---
 drivers/scsi/storvsc_drv.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index d0d7b277a0c2..808dc677ed93 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -306,6 +306,7 @@ enum storvsc_request_type {
 #define SRB_STATUS_SUCCESS	0x01
 #define SRB_STATUS_ABORTED	0x02
 #define SRB_STATUS_ERROR	0x04
+#define SRB_STATUS_DATA_OVERRUN	0x12
 
 /*
  * This is the end of Protocol specific defines.
@@ -1082,6 +1083,7 @@ static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request)
 	struct scsi_sense_hdr sense_hdr;
 	struct vmscsi_request *vm_srb;
 	struct stor_mem_pools *memp = scmnd->device->hostdata;
+	u32 data_transfer_length;
 	struct Scsi_Host *host;
 	struct storvsc_device *stor_dev;
 	struct hv_device *dev = host_dev->dev;
@@ -1090,6 +1092,7 @@ static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request)
 	host = stor_dev->host;
 
 	vm_srb = &cmd_request->vstor_packet.vm_srb;
+	data_transfer_length = vm_srb->data_transfer_length;
 	if (cmd_request->bounce_sgl_count) {
 		if (vm_srb->data_in == READ_TYPE)
 			copy_from_bounce_buffer(scsi_sglist(scmnd),
@@ -1108,13 +1111,20 @@ static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request)
 			scsi_print_sense_hdr("storvsc", &sense_hdr);
 	}
 
-	if (vm_srb->srb_status != SRB_STATUS_SUCCESS)
+	if (vm_srb->srb_status != SRB_STATUS_SUCCESS) {
 		storvsc_handle_error(vm_srb, scmnd, host, sense_hdr.asc,
 					 sense_hdr.ascq);
+		/*
+		 * The Windows driver set data_transfer_length on
+		 * SRB_STATUS_DATA_OVERRUN. On other errors, this value
+		 * is untouched.  In these cases we set it to 0.
+		 */
+		if (vm_srb->srb_status != SRB_STATUS_DATA_OVERRUN)
+			data_transfer_length = 0;
+	}
 
 	scsi_set_resid(scmnd,
-		cmd_request->data_buffer.len -
-		vm_srb->data_transfer_length);
+		cmd_request->data_buffer.len - data_transfer_length);
 
 	scsi_done_fn = scmnd->scsi_done;
 
-- 
2.12.0