Re: [PATCH] net: usb: rtl8150: use new api ethtool_{get|set}_link_ksettings
From: Petko Manolov
Date: Tue Mar 14 2017 - 13:13:21 EST
On 17-03-13 17:00:20, Petko Manolov wrote:
> On 17-03-12 23:16:25, Philippe Reynes wrote:
> > The ethtool api {get|set}_settings is deprecated. We move this driver to new
> > api {get|set}_link_ksettings.
> >
> > As I don't have the hardware, I'd be very pleased if someone may test this
> > patch.
>
> I've got some old adapters around and will drop you a line when i test the
> patch.
The adapter is working fine with your patch. You may add:
Acked-by: Petko Manolov <petkan@xxxxxxxxxxxxx>
cheers,
Petko
> > Signed-off-by: Philippe Reynes <tremyfr@xxxxxxxxx>
> > ---
> > drivers/net/usb/rtl8150.c | 35 ++++++++++++++++++++---------------
> > 1 files changed, 20 insertions(+), 15 deletions(-)
> >
> > diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
> > index c81c791..daaa88a 100644
> > --- a/drivers/net/usb/rtl8150.c
> > +++ b/drivers/net/usb/rtl8150.c
> > @@ -791,47 +791,52 @@ static void rtl8150_get_drvinfo(struct net_device *netdev, struct ethtool_drvinf
> > usb_make_path(dev->udev, info->bus_info, sizeof(info->bus_info));
> > }
> >
> > -static int rtl8150_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
> > +static int rtl8150_get_link_ksettings(struct net_device *netdev,
> > + struct ethtool_link_ksettings *ecmd)
> > {
> > rtl8150_t *dev = netdev_priv(netdev);
> > short lpa, bmcr;
> > + u32 supported;
> >
> > - ecmd->supported = (SUPPORTED_10baseT_Half |
> > + supported = (SUPPORTED_10baseT_Half |
> > SUPPORTED_10baseT_Full |
> > SUPPORTED_100baseT_Half |
> > SUPPORTED_100baseT_Full |
> > SUPPORTED_Autoneg |
> > SUPPORTED_TP | SUPPORTED_MII);
> > - ecmd->port = PORT_TP;
> > - ecmd->transceiver = XCVR_INTERNAL;
> > - ecmd->phy_address = dev->phy;
> > + ecmd->base.port = PORT_TP;
> > + ecmd->base.phy_address = dev->phy;
> > get_registers(dev, BMCR, 2, &bmcr);
> > get_registers(dev, ANLP, 2, &lpa);
> > if (bmcr & BMCR_ANENABLE) {
> > u32 speed = ((lpa & (LPA_100HALF | LPA_100FULL)) ?
> > SPEED_100 : SPEED_10);
> > - ethtool_cmd_speed_set(ecmd, speed);
> > - ecmd->autoneg = AUTONEG_ENABLE;
> > + ecmd->base.speed = speed;
> > + ecmd->base.autoneg = AUTONEG_ENABLE;
> > if (speed == SPEED_100)
> > - ecmd->duplex = (lpa & LPA_100FULL) ?
> > + ecmd->base.duplex = (lpa & LPA_100FULL) ?
> > DUPLEX_FULL : DUPLEX_HALF;
> > else
> > - ecmd->duplex = (lpa & LPA_10FULL) ?
> > + ecmd->base.duplex = (lpa & LPA_10FULL) ?
> > DUPLEX_FULL : DUPLEX_HALF;
> > } else {
> > - ecmd->autoneg = AUTONEG_DISABLE;
> > - ethtool_cmd_speed_set(ecmd, ((bmcr & BMCR_SPEED100) ?
> > - SPEED_100 : SPEED_10));
> > - ecmd->duplex = (bmcr & BMCR_FULLDPLX) ?
> > + ecmd->base.autoneg = AUTONEG_DISABLE;
> > + ecmd->base.speed = ((bmcr & BMCR_SPEED100) ?
> > + SPEED_100 : SPEED_10);
> > + ecmd->base.duplex = (bmcr & BMCR_FULLDPLX) ?
> > DUPLEX_FULL : DUPLEX_HALF;
> > }
> > +
> > + ethtool_convert_legacy_u32_to_link_mode(ecmd->link_modes.supported,
> > + supported);
> > +
> > return 0;
> > }
> >
> > static const struct ethtool_ops ops = {
> > .get_drvinfo = rtl8150_get_drvinfo,
> > - .get_settings = rtl8150_get_settings,
> > - .get_link = ethtool_op_get_link
> > + .get_link = ethtool_op_get_link,
> > + .get_link_ksettings = rtl8150_get_link_ksettings,
> > };
> >
> > static int rtl8150_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
> > --
> > 1.7.4.4
> >
> >