Re: [PATCH v6 0/4] Broadcom SBA RAID support
From: Anup Patel
Date: Wed Mar 15 2017 - 04:02:53 EST
On Wed, Mar 15, 2017 at 12:18 AM, Shaohua Li <shli@xxxxxxxxxx> wrote:
> On Tue, Mar 14, 2017 at 09:56:35AM -0700, Dan Williams wrote:
>> On Mon, Mar 6, 2017 at 1:43 AM, Anup Patel <anup.patel@xxxxxxxxxxxx> wrote:
>> > The Broadcom SBA RAID is a stream-based device which provides
>> > RAID5/6 offload.
>> >
>> > It requires a SoC specific ring manager (such as Broadcom FlexRM
>> > ring manager) to provide ring-based programming interface. Due to
>> > this, the Broadcom SBA RAID driver (mailbox client) implements
>> > DMA device having one DMA channel using a set of mailbox channels
>> > provided by Broadcom SoC specific ring manager driver (mailbox
>> > controller).
>> >
>> > The Broadcom SBA RAID hardware requires PQ disk position instead
>> > of PQ disk coefficient. To address this, we have added raid_gflog
>> > table which will help driver to convert PQ disk coefficient to PQ
>> > disk position.
>> >
>> > This patchset is based on Linux-4.11-rc1 and depends on patchset
>> > "[PATCH v5 0/2] Broadcom FlexRM ring manager support"
>> >
>> > It is also available at sba-raid-v6 branch of
>> > https://github.com/Broadcom/arm64-linux.git
>> >
>> [..]
>> >
>> > Anup Patel (4):
>> > lib/raid6: Add log-of-2 table for RAID6 HW requiring disk position
>> > async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()
>> > dmaengine: Add Broadcom SBA RAID driver
>> > dt-bindings: Add DT bindings document for Broadcom SBA RAID driver
>>
>> For the dmaengine and async_tx changes:
>>
>> Acked-by: Dan Williams <dan.j.williams@xxxxxxxxx>
>>
>> The raid change should get an ack from Shaohua.
>
> For the raid6 part:
>
> Acked-by: Shaohua Li <shli@xxxxxx>
Thanks Shaohua ...
Regards,
Anup