Re: [PATCH 1/2] power: Add support for the Toby Churchill SBS battery monitor driver.

From: Sebastian Reichel
Date: Wed Mar 15 2017 - 17:52:35 EST

Next message: Jonathan Cameron: "Re: [Outreachy kernel] [PATCH v2] staging: iio: ade7753: replace mlock with driver private lock"
Previous message: Philippe Reynes: "[PATCH v2] net: sun: sungem: rix a possible null dereference"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi,

On Thu, Feb 23, 2017 at 06:38:11PM +0100, Enric Balletbo i Serra wrote:
> Some of the Toby Churchill devices come with a smart battery and one
> AVR XMEGA Microcontroller monitor its state. This patch adds the driver
> for this battery monitor.

Sorry for the delay. I'm mostly fine with the driver. You can find a
few notes below.

> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
> ---
> drivers/power/supply/Kconfig | 10 +
> drivers/power/supply/Makefile | 2 +
> drivers/power/supply/xmega16d4_battery.c | 353 +++++++++++++++++++++++++++++++
> 3 files changed, 365 insertions(+)
> create mode 100644 drivers/power/supply/xmega16d4_battery.c
>
> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> index 76806a0..f95f8d5 100644
> --- a/drivers/power/supply/Kconfig
> +++ b/drivers/power/supply/Kconfig
> @@ -511,4 +511,14 @@ config AXP20X_POWER
> This driver provides support for the power supply features of
> AXP20x PMIC.
>
> +config BATTERY_XMEGA16D4
> + tristate "XMEGA16D4 Battery Gauge Driver"
> + depends on SPI
> + help
> + Say Y here to include support for XMEGA16D4 Battery Gauge. The
> + driver reports the charge count, and measures the voltage and
> + the current.
> +
> + This adds support for XMEGA16D4 battery.
> +
> endif # POWER_SUPPLY
> diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
> index 36c599d..abae887 100644
> --- a/drivers/power/supply/Makefile
> +++ b/drivers/power/supply/Makefile
> @@ -72,3 +72,5 @@ obj-$(CONFIG_CHARGER_TPS65090) += tps65090-charger.o
> obj-$(CONFIG_CHARGER_TPS65217) += tps65217_charger.o
> obj-$(CONFIG_AXP288_FUEL_GAUGE) += axp288_fuel_gauge.o
> obj-$(CONFIG_AXP288_CHARGER) += axp288_charger.o
> +obj-$(CONFIG_BATTERY_XMEGA16D4) += xmega16d4_battery.o
> +
> diff --git a/drivers/power/supply/xmega16d4_battery.c b/drivers/power/supply/xmega16d4_battery.c
> new file mode 100644
> index 0000000..8c6b11a
> --- /dev/null
> +++ b/drivers/power/supply/xmega16d4_battery.c
> @@ -0,0 +1,353 @@
> +/*
> + * Battery monitor driver for SL50 Toby Churchill SBS Batteries
> + *
> + * Copyright (c) 2017, Collabora Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/power_supply.h>
> +#include <linux/spi/spi.h>
> +#include <linux/workqueue.h>
> +
> +#define SBS_MEMORY_MAP_SIZE 128
> +/* Charging voltage, 2 bytes */
> +#define SBS_CHARGING_VOLTAGE 0x0a
> +/* Design voltage, 2 bytes */
> +#define SBS_DESIGN_VOLTAGE 0x0c
> +/* Fast charging current, 2 bytes */
> +#define SBS_FAST_CHARGING_CURRENT 0x0e
> +/* Max T, Low T, 2 bytes */
> +#define SBS_MAX_LOW_TEMPERATURE 0x10
> +/* Pack capacity, 2 bytes */
> +#define SBS_PACK_CAPACITY 0x12
> +/* Serial number, 2 bytes */
> +#define SBS_SERIAL_NUMBER 0x18
> +/* Manufacturer name, 16 bytes */
> +#define SBS_MANUFACTURER_NAME 0x20
> +/* Model name, 16 bytes */
> +#define SBS_MODEL_NAME 0x30
> +/* Device chemistry, 5 bytes */
> +#define SBS_DEVICE_CHEMISTRY 0x40
> +/* Cycle count, 2 bytes */
> +#define SBS_CYCLE_COUNT 0x50
> +/* Voltage now, 2 bytes */
> +#define SBS_VOLTAGE_NOW 0x70
> +/* Current now, 2 bytes */
> +#define SBS_CURRENT_NOW 0x72
> +/* Battery Status, 2 bytes */
> +#define SBS_BATTERY_STATUS 0x74
> +# define BATTERY_STATUS_CHARGING 0
> +# define BATTERY_STATUS_DISCHARGING BIT(6)
> +# define BATTERY_STATUS_FULLY_CHARGED BIT(5)
> +/* State of charge in percentage, 1 byte */
> +#define SBS_STATE_OF_CHARGE 0x76
> +
> +/* MM SIZE + START(u16) + CHECKSUM(u16) */
> +#define SPI_MSG_LENGTH (SBS_MEMORY_MAP_SIZE + 4)
> +#define SPI_MSG_DATA_BP 2
> +/* MSB checksum byte position */
> +#define SPI_MSG_CSUM_BP (2 + SBS_MEMORY_MAP_SIZE)
> +#define SPI_MSG_START_TOKEN 0xb00b
> +
> +struct xmega16d4_battery_data {
> + struct spi_device *spi;
> + struct power_supply *bat;
> +
> + struct mutex work_lock; /* protect work data */
> + struct delayed_work bat_work;
> +
> + u8 map[SBS_MEMORY_MAP_SIZE];
> +
> + char model_name[16];
> + char manufacturer_name[16];
> + char serial_number[5];
> +
> + int technology;
> + int voltage_uV; /* units of uV */
> + int current_uA; /* units of uA */
> + int rated_capacity; /* units of µAh */
> + int cycle_count;
> + int rem_capacity; /* percentage */
> + int life_sec; /* units of seconds */
> + int status; /* state of charge */
> +};
> +
> +#define MAX_KEYLENGTH 256
> +struct battery_property_map {
> + int value;
> + char const *key;
> +};
> +
> +static struct battery_property_map map_technology[] = {
> + { POWER_SUPPLY_TECHNOLOGY_NiMH, "NiMH" },
> + { POWER_SUPPLY_TECHNOLOGY_LION, "LION" },
> + { POWER_SUPPLY_TECHNOLOGY_LIPO, "LIPO" },
> + { POWER_SUPPLY_TECHNOLOGY_LiFe, "LiFe" },
> + { POWER_SUPPLY_TECHNOLOGY_NiCd, "NiCd" },
> + { POWER_SUPPLY_TECHNOLOGY_LiMn, "LiMn" },
> + { -1, NULL },
> +};
> +
> +static int map_get_value(struct battery_property_map *map, const char *key,
> + int def_val)
> +{
> + char buf[MAX_KEYLENGTH];
> + int cr;
> +
> + strncpy(buf, key, MAX_KEYLENGTH);
> + buf[MAX_KEYLENGTH - 1] = '\0';
> +
> + cr = strnlen(buf, MAX_KEYLENGTH) - 1;
> + if (buf[cr] == '\n')
> + buf[cr] = '\0';
> +
> + while (map->key) {
> + if (strncasecmp(map->key, buf, MAX_KEYLENGTH) == 0)
> + return map->value;
> + map++;
> + }
> +
> + return def_val;
> +}
> +
> +static int xmega16d4_battery_read_status(struct xmega16d4_battery_data *data)
> +{
> + int i;
> + int csum = 0;
> + u8 buf[SBS_MEMORY_MAP_SIZE], technology[5];
> + unsigned int uval;
> + int sval;
> + struct spi_device *spi = data->spi;
> +
> + for (i = 0; i < SBS_MEMORY_MAP_SIZE; i++) {
> + spi_write(spi, &i, 1);
> + spi_read(spi, &buf[i], 1);

spi_write_then_read(spi, &i, 1, &buf[i], 1)
if (err)
complain

> + }
> +
> + print_hex_dump(KERN_DEBUG, ": ", DUMP_PREFIX_OFFSET, 16, 1,
> + buf, SBS_MEMORY_MAP_SIZE, false);
> +
> + /* Calculate the data checksum */
> + for (i = 0; i < SBS_MEMORY_MAP_SIZE - 2; i++)
> + csum += buf[i];
> +
> + /* Verify the checksum */
> + uval = (buf[SBS_MEMORY_MAP_SIZE - 2] << 8) |
> + buf[SBS_MEMORY_MAP_SIZE - 1];
> + if (csum != uval) {
> + dev_dbg(&spi->dev,
> + "message received with invalid checksum (%d != %d)\n",
> + csum, uval);
> + return -ENOMSG;

dev_dbg? So it happens regularly?

> + }
> +
> + /* Update memory map with the new data */
> + memcpy(data->map, buf, SBS_MEMORY_MAP_SIZE);
> +
> + strncpy(data->model_name, &data->map[SBS_MODEL_NAME], 16);
> +
> + strncpy(data->manufacturer_name, &data->map[SBS_MANUFACTURER_NAME],
> + 16);
> +
> + strncpy(technology, &data->map[SBS_DEVICE_CHEMISTRY], 5);
> +
> + uval = (u16)((data->map[SBS_SERIAL_NUMBER + 1] << 8) |
> + data->map[SBS_SERIAL_NUMBER]);
> + snprintf(data->serial_number, ARRAY_SIZE(data->serial_number), "%04d",
> + uval);
> +
> + data->technology = map_get_value(map_technology, technology,
> + POWER_SUPPLY_TECHNOLOGY_UNKNOWN);
> +
> + data->voltage_uV = (u16)((data->map[SBS_VOLTAGE_NOW + 1] << 8) |
> + data->map[SBS_VOLTAGE_NOW]);
> + data->voltage_uV *= 1000; /* convert from mV to uV */
> +
> + sval = (s16)((data->map[SBS_CURRENT_NOW + 1] << 8) |
> + data->map[SBS_CURRENT_NOW]);
> + data->current_uA = sval;
> + data->current_uA *= 1000; /* convert from mA to uA */
> +
> + data->rated_capacity = (u16)((data->map[SBS_PACK_CAPACITY + 1] << 8) |
> + data->map[SBS_PACK_CAPACITY]);
> + data->rated_capacity *= 1000; /* convert from mAh to uAh */
> +
> + uval = (u16)((data->map[SBS_BATTERY_STATUS + 1] << 8) |
> + data->map[SBS_BATTERY_STATUS]);
> + if (uval == BATTERY_STATUS_CHARGING)
> + data->status = POWER_SUPPLY_STATUS_CHARGING;
> + else if (uval == BATTERY_STATUS_DISCHARGING)
> + data->status = POWER_SUPPLY_STATUS_DISCHARGING;
> + else if (uval == BATTERY_STATUS_FULLY_CHARGED)
> + data->status = POWER_SUPPLY_STATUS_FULL;
> + else
> + data->status = POWER_SUPPLY_STATUS_UNKNOWN;
> +
> + data->cycle_count = (u16)((data->map[SBS_CYCLE_COUNT + 1] << 8) |
> + data->map[SBS_CYCLE_COUNT]);
> +
> + data->rem_capacity = data->map[SBS_STATE_OF_CHARGE];
> +
> + uval = (data->rem_capacity * (data->rated_capacity / 1000)) / 100;
> + if (data->current_uA)
> + data->life_sec = (3600l * uval) / (data->current_uA / 1000);

looks like the driver would benefit from regmap.

> + return 0;
> +}
> +
> +static void xmega16d4_battery_work(struct work_struct *work)
> +{
> + struct xmega16d4_battery_data *data = container_of(work,
> + struct xmega16d4_battery_data, bat_work.work);
> +
> + /* Update values */
> + mutex_lock(&data->work_lock);
> + xmega16d4_battery_read_status(data);
> + mutex_unlock(&data->work_lock);
> +
> + schedule_delayed_work(&data->bat_work, HZ * 60);
> +}
> +
> +static int xmega16d4_battery_get_property(struct power_supply *psy,
> + enum power_supply_property psp,
> + union power_supply_propval *val)
> +{
> + struct xmega16d4_battery_data *data = power_supply_get_drvdata(psy);
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_STATUS:
> + val->intval = data->status;
> + break;
> + case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> + val->intval = data->voltage_uV;
> + break;
> + case POWER_SUPPLY_PROP_CURRENT_NOW:
> + val->intval = data->current_uA;
> + break;
> + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
> + val->intval = data->rated_capacity;
> + break;
> + case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
> + val->intval = data->life_sec;
> + break;
> + case POWER_SUPPLY_PROP_CAPACITY:
> + val->intval = data->rem_capacity;
> + break;
> + case POWER_SUPPLY_PROP_TECHNOLOGY:
> + val->intval = data->technology;
> + break;
> + case POWER_SUPPLY_PROP_MODEL_NAME:
> + val->strval = data->model_name;
> + break;
> + case POWER_SUPPLY_PROP_MANUFACTURER:
> + val->strval = data->manufacturer_name;
> + break;
> + case POWER_SUPPLY_PROP_SERIAL_NUMBER:
> + val->strval = data->serial_number;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static enum power_supply_property xmega16d4_battery_props[] = {
> + POWER_SUPPLY_PROP_STATUS,
> + POWER_SUPPLY_PROP_VOLTAGE_NOW,
> + POWER_SUPPLY_PROP_CURRENT_NOW,
> + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
> + POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
> + POWER_SUPPLY_PROP_CAPACITY,
> + POWER_SUPPLY_PROP_TECHNOLOGY,
> + /* Properties of type `const char *' */
> + POWER_SUPPLY_PROP_MODEL_NAME,
> + POWER_SUPPLY_PROP_MANUFACTURER,
> + POWER_SUPPLY_PROP_SERIAL_NUMBER,
> +};
> +
> +static const struct power_supply_desc xmega16d4_battery_desc = {
> + .name = "battery-monitor",
> + .type = POWER_SUPPLY_TYPE_BATTERY,
> + .properties = xmega16d4_battery_props,
> + .num_properties = ARRAY_SIZE(xmega16d4_battery_props),
> + .get_property = xmega16d4_battery_get_property,
> +};
> +
> +static int xmega16d4_battery_probe(struct spi_device *spi)
> +{
> + struct xmega16d4_battery_data *data;
> + struct power_supply_config psy_cfg = {};
> +
> + data = devm_kzalloc(&spi->dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + data->spi = spi;
> + psy_cfg.of_node = spi->dev.of_node;
> + psy_cfg.drv_data = data;
> +
> + mutex_init(&data->work_lock);
> +
> + INIT_DELAYED_WORK(&data->bat_work, xmega16d4_battery_work);
> +
> + spi_set_drvdata(spi, data);
> +
> + /* Get initial status */
> + if (xmega16d4_battery_read_status(data))
> + return -ENODEV;
> +
> + data->bat = devm_power_supply_register(&spi->dev,
> + &xmega16d4_battery_desc,
> + &psy_cfg);
> + if (IS_ERR(data->bat))
> + return PTR_ERR(data->bat);
> +
> + schedule_delayed_work(&data->bat_work, 0);
> +
> + return 0;
> +}
> +
> +static int xmega16d4_battery_remove(struct spi_device *spi)
> +{
> + struct xmega16d4_battery_data *data = spi_get_drvdata(spi);
> +
> + cancel_delayed_work_sync(&data->bat_work);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id xmega16d4_battery_of_match[] = {
> + { .compatible = "tcl,xmega16d4-battery", },
> + { /* sentinel */ },
> +};
> +
> +static struct spi_driver xmega16d4_battery_driver = {
> + .driver = {
> + .name = "xmega16d4-battery",
> + .owner = THIS_MODULE,
> + .of_match_table = of_match_ptr(xmega16d4_battery_of_match),

Either put xmega16d4_battery_of_match inside of #ifdef CONFIG_OF
or drop of_match_ptr. Otherwise there will be an unused warning
for the CONFIG_OF=n case.

> + },
> + .probe = xmega16d4_battery_probe,
> + .remove = xmega16d4_battery_remove,
> +};
> +module_spi_driver(xmega16d4_battery_driver);
> +
> +MODULE_ALIAS("spi:xmega16d4-battery");
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Enric Balletbo Serra <enric.balletbo@xxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("xmega16d4 battery monitor driver");

Otherwise the driver looks fine. I'm a bit worried about the name,
though. xmega16d4 is just a microcontroller. This driver is more
about its firmware. I think something like "toby-churchill-battery-monitor"
would be better.

-- Sebastian

Attachment: signature.asc
Description: PGP signature

Next message: Jonathan Cameron: "Re: [Outreachy kernel] [PATCH v2] staging: iio: ade7753: replace mlock with driver private lock"
Previous message: Philippe Reynes: "[PATCH v2] net: sun: sungem: rix a possible null dereference"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]