Re: [PATCH v4 1/2] dt: bindings: fpga: add xilinx slave-serial binding description

[Michal Simek]

On 28.2.2017 17:40, Anatolij Gustschin wrote:
> Add dt binding documentation details for Xilinx FPGA configuration
> over slave serial interface.
> 
> Signed-off-by: Anatolij Gustschin <agust@xxxxxxx>
> Acked-by: Moritz Fischer <mdf@xxxxxxxxxx>
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
> ---
> Changes in v4:
> 
>  - add Acked-by tags
>  
> Changes in v3:
> 
>  - extend example to show the usage in SPI master node, connected
>    to the fpga-region node
> 
> Changes in v2:
> 
>  - correct gpios properties in example to match above description
> 
>  - use fpga-mgr@0 instead of fpga-spi@0 in example
> 
>  .../bindings/fpga/xilinx-slave-serial.txt          | 44 ++++++++++++++++++++++
>  1 file changed, 44 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
> 
> diff --git a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
> new file mode 100644
> index 0000000..9766f74
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
> @@ -0,0 +1,44 @@
> +Xilinx Slave Serial SPI FPGA Manager
> +
> +Xilinx Spartan-6 FPGAs support a method of loading the bitstream over
> +what is referred to as "slave serial" interface.
> +The slave serial link is not technically SPI, and might require extra
> +circuits in order to play nicely with other SPI slaves on the same bus.
> +
> +See https://www.xilinx.com/support/documentation/user_guides/ug380.pdf
> +
> +Required properties:
> +- compatible: should contain "xlnx,fpga-slave-serial"
> +- reg: spi chip select of the FPGA
> +- prog_b-gpios: config pin (referred to as PROGRAM_B in the manual)
> +- done-gpios: config status pin (referred to as DONE in the manual)
> +
> +Example for full FPGA configuration:
> +
> +	fpga-region0 {
> +		compatible = "fpga-region";
> +		fpga-mgr = <&fpga_mgr_spi>;
> +		#address-cells = <0x1>;
> +		#size-cells = <0x1>;
> +	};
> +
> +	spi1: spi@10680 {
> +		compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
> +		pinctrl-0 = <&spi0_pins>;
> +		pinctrl-names = "default";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		cell-index = <1>;
> +		interrupts = <92>;
> +		clocks = <&coreclk 0>;
> +		status = "okay";
> +
> +		fpga_mgr_spi: fpga-mgr@0 {
> +			compatible = "xlnx,fpga-slave-serial";
> +			spi-max-frequency = <60000000>;
> +			spi-cpha;
> +			reg = <0>;
> +			done-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
> +			prog_b-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
> +		};
> +	};
> 

Acked-by: Michal Simek <michal.simek@xxxxxxxxxx>

Thanks,
Michal

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP SoCs

Attachment: signature.asc
Description: OpenPGP digital signature