Re: [PATCH v5 untested] kvm: better MWAIT emulation for guests
From: Radim KrÄmÃÅ
Date: Thu Mar 16 2017 - 11:35:42 EST
2017-03-16 10:58-0400, Gabriel L. Somlo:
> On Thu, Mar 16, 2017 at 04:04:12PM +0200, Michael S. Tsirkin wrote:
> > On Thu, Mar 16, 2017 at 09:24:27AM -0400, Gabriel L. Somlo wrote:
> > > After studying your patch a bit more carefully (sorry, it's crazy
> > > around here right now :) ) I realized you're simply trying to
> > > (selectively) decide when to exit L1 and emulate as NOP vs. when to
> > > just allow L1 to execute MONITOR & MWAIT natively.
> > >
> > > Is that right ? Because if so, the issues I saw on my MacPro1,1 are
> > > weird and inexplicable, given that allowing L>=1 to run MONITOR/MWAIT
> > > natively was one of the options Alex Graf and Rene Rebe used back in
> > > the very early days of OS X on QEMU, at the time I got involved with
> > > that project. Here's part of an out of tree patch against 3.4 which did
> > > just that, and worked as far as I remember on *any* MWAIT capable
> > > intel chip I had access to back in 2010:
> > >
> > > ##############################################################################
> > > # 99-mwait.patch.kvm-kmod (Rene Rebe <rene@xxxxxxxxxxxx>) 2010-04-27
> > > ##############################################################################
> > > diff -pNarU5 linux-3.4/arch/x86/kvm/cpuid.c linux-3.4-mac/arch/x86/kvm/cpuid.c
> > > --- linux-3.4/arch/x86/kvm/cpuid.c 2012-05-20 18:29:13.000000000 -0400
> > > +++ linux-3.4-mac/arch/x86/kvm/cpuid.c 2012-10-09 11:42:59.921215750 -0400
> > > @@ -222,11 +222,11 @@ static int do_cpuid_ent(struct kvm_cpuid
> > > f_nx | 0 /* Reserved */ | F(MMXEXT) | F(MMX) |
> > > F(FXSR) | F(FXSR_OPT) | f_gbpages | f_rdtscp |
> > > 0 /* Reserved */ | f_lm | F(3DNOWEXT) | F(3DNOW);
> > > /* cpuid 1.ecx */
> > > const u32 kvm_supported_word4_x86_features =
> > > - F(XMM3) | F(PCLMULQDQ) | 0 /* DTES64, MONITOR */ |
> > > + F(XMM3) | F(PCLMULQDQ) | F(MWAIT) /* DTES64, MONITOR */ |
> > > 0 /* DS-CPL, VMX, SMX, EST */ |
> > > 0 /* TM2 */ | F(SSSE3) | 0 /* CNXT-ID */ | 0 /* Reserved */ |
> > > F(FMA) | F(CX16) | 0 /* xTPR Update, PDCM */ |
> > > 0 /* Reserved, DCA */ | F(XMM4_1) |
> > > F(XMM4_2) | F(X2APIC) | F(MOVBE) | F(POPCNT) |
> > > diff -pNarU5 linux-3.4/arch/x86/kvm/svm.c linux-3.4-mac/arch/x86/kvm/svm.c
> > > --- linux-3.4/arch/x86/kvm/svm.c 2012-05-20 18:29:13.000000000 -0400
> > > +++ linux-3.4-mac/arch/x86/kvm/svm.c 2012-10-09 11:44:41.598997481 -0400
> > > @@ -1102,12 +1102,10 @@ static void init_vmcb(struct vcpu_svm *s
> > > set_intercept(svm, INTERCEPT_VMSAVE);
> > > set_intercept(svm, INTERCEPT_STGI);
> > > set_intercept(svm, INTERCEPT_CLGI);
> > > set_intercept(svm, INTERCEPT_SKINIT);
> > > set_intercept(svm, INTERCEPT_WBINVD);
> > > - set_intercept(svm, INTERCEPT_MONITOR);
> > > - set_intercept(svm, INTERCEPT_MWAIT);
> > > set_intercept(svm, INTERCEPT_XSETBV);
> > >
> > > control->iopm_base_pa = iopm_base;
> > > control->msrpm_base_pa = __pa(svm->msrpm);
> > > control->int_ctl = V_INTR_MASKING_MASK;
> > > diff -pNarU5 linux-3.4/arch/x86/kvm/vmx.c linux-3.4-mac/arch/x86/kvm/vmx.c
> > > --- linux-3.4/arch/x86/kvm/vmx.c 2012-05-20 18:29:13.000000000 -0400
> > > +++ linux-3.4-mac/arch/x86/kvm/vmx.c 2012-10-09 11:42:59.925215977 -0400
> > > @@ -1938,11 +1938,11 @@ static __init void nested_vmx_setup_ctls
> > > nested_vmx_procbased_ctls_low, nested_vmx_procbased_ctls_high);
> > > nested_vmx_procbased_ctls_low = 0;
> > > nested_vmx_procbased_ctls_high &=
> > > CPU_BASED_VIRTUAL_INTR_PENDING | CPU_BASED_USE_TSC_OFFSETING |
> > > CPU_BASED_HLT_EXITING | CPU_BASED_INVLPG_EXITING |
> > > - CPU_BASED_MWAIT_EXITING | CPU_BASED_CR3_LOAD_EXITING |
> > > + CPU_BASED_CR3_LOAD_EXITING |
> > > CPU_BASED_CR3_STORE_EXITING |
> > > #ifdef CONFIG_X86_64
> > > CPU_BASED_CR8_LOAD_EXITING | CPU_BASED_CR8_STORE_EXITING |
> > > #endif
> > > CPU_BASED_MOV_DR_EXITING | CPU_BASED_UNCOND_IO_EXITING |
> > > @@ -2404,12 +2404,10 @@ static __init int setup_vmcs_config(stru
> > > CPU_BASED_CR3_LOAD_EXITING |
> > > CPU_BASED_CR3_STORE_EXITING |
> > > CPU_BASED_USE_IO_BITMAPS |
> > > CPU_BASED_MOV_DR_EXITING |
> > > CPU_BASED_USE_TSC_OFFSETING |
> > > - CPU_BASED_MWAIT_EXITING |
> > > - CPU_BASED_MONITOR_EXITING |
> > > CPU_BASED_INVLPG_EXITING |
> > > CPU_BASED_RDPMC_EXITING;
> > >
> > > opt = CPU_BASED_TPR_SHADOW |
> > > CPU_BASED_USE_MSR_BITMAPS |
> > >
> > > If all you're trying to do is (selectively) revert to this behavior,
> > > that "shouldn't" mess it up for the MacPro either, so I'm thoroughly
> > > confused at this point :)
> >
> > Yes. Me too. Want to try that other patch and see what happens?
>
> You mean the old 3.4 patch against current KVM ? I'll try to do that,
> might take me a while :)
Michael's patch already did most of that, you just need to add
diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c
index efde6cc50875..b12f07d4ce17 100644
--- a/arch/x86/kvm/cpuid.c
+++ b/arch/x86/kvm/cpuid.c
@@ -348,7 +348,7 @@ static inline int __do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
const u32 kvm_cpuid_1_ecx_x86_features =
/* NOTE: MONITOR (and MWAIT) are emulated as NOP,
* but *not* advertised to guests via CPUID ! */
- F(XMM3) | F(PCLMULQDQ) | 0 /* DTES64, MONITOR */ |
+ F(XMM3) | F(PCLMULQDQ) | F(MWAIT) /* DTES64, MONITOR */ |
0 /* DS-CPL, VMX, SMX, EST */ |
0 /* TM2 */ | F(SSSE3) | 0 /* CNXT-ID */ | 0 /* Reserved */ |
F(FMA) | F(CX16) | 0 /* xTPR Update, PDCM */ |
Note: this will never be upstream, because mwait isn't what we want by
default. :)
>> > Back in 2010, running MWAIT in L>=1 behaved 100% exactly like a NOP,
>> > didn't power down the physical CPU, just immediately moved on to the
>> > next instruction. As such, there was no power saving and no
>> > opportunity to yield to another L0 thread either, unlike with NOP
>> > emulation at L0.
>> >
>> > Did that change on newer Intel chips (i.e., is guest-mode MWAIT now
>> > doing something smarter than just acting as a guest-mode NOP) ?
>> >
>> > Thanks,
>> > --Gabriel
>>
>> Interesting. What it seems to say is this:
>>
>> MWAIT. Behavior of the MWAIT instruction (which always causes an invalid-
>> opcode exceptionâ#UDâif CPL > 0) is determined by the setting of the âMWAIT
>> exitingâ VM-execution control:
>> â If the âMWAIT exitingâ VM-execution control is 1, MWAIT causes a VM exit
>> (see Section 22.1.3).
>> â If the âMWAIT exitingâ VM-execution control is 0, MWAIT operates normally if
>> any of the following is true: (1) the âinterrupt-window exitingâ VM-execution
>> control is 0; (2) ECX[0] is 0; or (3) RFLAGS.IF = 1.
>> â If the âMWAIT exitingâ VM-execution control is 0, the âinterrupt-window
>> exitingâ VM-execution control is 1, ECX[0] = 1, and RFLAGS.IF = 0, MWAIT
>> does not cause the processor to enter an implementation-dependent
>> optimized state; instead, control passes to the instruction following the
>> MWAIT instruction.
>>
>>
>> And since interrupt-window exiting is 0 most of the time for KVM,
>> I would expect MWAIT to behave normally.
>
> The intel manual said the same thing back in 2010 as well. However,
> regardless of how any flags were set, interrupt-window exiting or not,
> "normal" L1 MWAIT behavior was that it woke up immediately regardless.
> Remember, never going to sleep is still correct ("normal" ?) behavior
> per the ISA definition of MWAIT :)
I'll write a simple kvm-unit-test to better understand why it is broken
for you ...
> Also, when I tested your patch on the macbook air (where it worked),
> not only was the host reporting 400% CPU for qemu (which is to be
> expected), but the thermal fan/cooling thing also shifted up into high
> gear, which means the physical CPU got hot, which it shouldn't have if
> the guest-mode MWAIT actually did put the host CPU into low power.
I tested MWAIT with basically the same kernel patch and the qemu patch
with Linux guest on Haswell and Nehalem. Running the guest took 100% of
the host CPUs, but it still had the same temperature as when the host
was idle.
That reminds me that you to pass '-cpu host' for QEMU reasons.