Re: [PATCH v2 1/2] dt-bindings: Add INNOLUX P079ZCA panel bindings

[Brian Norris]

On Wed, Mar 15, 2017 at 03:19:12PM +0800, Chris Zhong wrote:
> The Innolux P079ZCA is a 7.85" panel with a 768X1024 resolution and
> connected to DSI using four lanes.
> 
> Signed-off-by: Chris Zhong <zyw@xxxxxxxxxxxxxx>
> ---
> 
> Changes in v2: None

You added documentation for the 'reg' property :)

Looks OK to me.

Reviewed-by: Brian Norris <briannorris@xxxxxxxxxxxx>

> 
>  .../bindings/display/panel/innolux,p079zca.txt     | 23 ++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
> new file mode 100644
> index 0000000..5c70a83
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
> @@ -0,0 +1,23 @@
> +Innolux P079ZCA 7.85" 768x1024 TFT LCD panel
> +
> +Required properties:
> +- compatible: should be "innolux,p079zca"
> +- reg: DSI virtual channel of the peripheral
> +- power-supply: phandle of the regulator that provides the supply voltage
> +- enable-gpios: panel enable gpio
> +
> +Optional properties:
> +- backlight: phandle of the backlight device attached to the panel
> +
> +Example:
> +
> +	&mipi_dsi {
> +		panel {
> +			compatible = "innolux,p079zca";
> +			reg = <0>;
> +			power-supply = <...>;
> +			backlight = <&backlight>;
> +			enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
> +			status = "okay";
> +		};
> +	};
> -- 
> 2.6.3