Re: [PATCH v12 6/9] mmc: cavium: Add MMC PCI driver for ThunderX SOCs

From: Ulf Hansson
Date: Fri Mar 17 2017 - 11:00:29 EST

Next message: Tom Lendacky: "Re: [RFC PATCH v2 08/32] x86: Use PAGE_KERNEL protection for ioremap of memory page"
Previous message: kbuild test robot: "[PATCH] fix ptr_ret.cocci warnings"
Next in thread: Jan Glauber: "Re: [PATCH v12 6/9] mmc: cavium: Add MMC PCI driver for ThunderX SOCs"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 10 March 2017 at 14:25, Jan Glauber <jglauber@xxxxxxxxxx> wrote:
> Add a platform driver for ThunderX ARM SOCs.
>
> Signed-off-by: Jan Glauber <jglauber@xxxxxxxxxx>
> ---
> drivers/mmc/host/Kconfig | 10 ++
> drivers/mmc/host/Makefile | 2 +
> drivers/mmc/host/cavium-mmc.h | 10 +-
> drivers/mmc/host/cavium-pci-thunderx.c | 198 +++++++++++++++++++++++++++++++++
> 4 files changed, 218 insertions(+), 2 deletions(-)
> create mode 100644 drivers/mmc/host/cavium-pci-thunderx.c
>
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 68cc811..3983dee 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -632,6 +632,16 @@ config MMC_CAVIUM_OCTEON
>
> If unsure, say N.
>
> +config MMC_CAVIUM_THUNDERX
> + tristate "Cavium ThunderX SD/MMC Card Interface support"
> + depends on PCI && 64BIT && (ARM64 || COMPILE_TEST)
> + select GPIO_THUNDERX

Do you really need to select GPIO_THUNDERX? What is the relationship?

Maybe "depends on GPIOLIB" instead?

> + help
> + This selects Cavium ThunderX SD/MMC Card Interface.
> + If you have an Cavium ARM64 board with a Multimedia Card slot
> + or builtin eMMC chip say Y or M here. If built as a module
> + the module will be called thunderx_mmc.ko.
> +
> config MMC_DW
> tristate "Synopsys DesignWare Memory Card Interface"
> depends on HAS_DMA
> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> index c7f0ccf..0068610 100644
> --- a/drivers/mmc/host/Makefile
> +++ b/drivers/mmc/host/Makefile
> @@ -44,6 +44,8 @@ obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o
> obj-$(CONFIG_SDH_BFIN) += bfin_sdh.o
> octeon-mmc-objs := cavium-mmc.o cavium-pltfm-octeon.o
> obj-$(CONFIG_MMC_CAVIUM_OCTEON) += octeon-mmc.o
> +thunderx-mmc-objs := cavium-mmc.o cavium-pci-thunderx.o
> +obj-$(CONFIG_MMC_CAVIUM_THUNDERX) += thunderx-mmc.o
> obj-$(CONFIG_MMC_DW) += dw_mmc.o
> obj-$(CONFIG_MMC_DW_PLTFM) += dw_mmc-pltfm.o
> obj-$(CONFIG_MMC_DW_EXYNOS) += dw_mmc-exynos.o
> diff --git a/drivers/mmc/host/cavium-mmc.h b/drivers/mmc/host/cavium-mmc.h
> index 4b22432..fb82aee 100644
> --- a/drivers/mmc/host/cavium-mmc.h
> +++ b/drivers/mmc/host/cavium-mmc.h
> @@ -22,8 +22,12 @@
> #define CAVIUM_MAX_MMC 4
>
> /* DMA register addresses */
> -#define MIO_EMM_DMA_CFG(x) (0x00 + x->reg_off_dma)
> -#define MIO_EMM_DMA_ADR(x) (0x08 + x->reg_off_dma)
> +#define MIO_EMM_DMA_CFG(x) (0x20 + x->reg_off_dma)
> +#define MIO_EMM_DMA_ADR(x) (0x28 + x->reg_off_dma)
> +#define MIO_EMM_DMA_INT(x) (0x30 + x->reg_off_dma)
> +#define MIO_EMM_DMA_INT_W1S(x) (0x38 + x->reg_off_dma)
> +#define MIO_EMM_DMA_INT_ENA_W1S(x) (0x40 + x->reg_off_dma)
> +#define MIO_EMM_DMA_INT_ENA_W1C(x) (0x48 + x->reg_off_dma)
>
> /* register addresses */
> #define MIO_EMM_CFG(x) (0x00 + x->reg_off)
> @@ -39,6 +43,8 @@
> #define MIO_EMM_SAMPLE(x) (0x90 + x->reg_off)
> #define MIO_EMM_STS_MASK(x) (0x98 + x->reg_off)
> #define MIO_EMM_RCA(x) (0xa0 + x->reg_off)
> +#define MIO_EMM_INT_EN_SET(x) (0xb0 + x->reg_off)
> +#define MIO_EMM_INT_EN_CLR(x) (0xb8 + x->reg_off)
> #define MIO_EMM_BUF_IDX(x) (0xe0 + x->reg_off)
> #define MIO_EMM_BUF_DAT(x) (0xe8 + x->reg_off)
>
> diff --git a/drivers/mmc/host/cavium-pci-thunderx.c b/drivers/mmc/host/cavium-pci-thunderx.c
> new file mode 100644
> index 0000000..6ad36b4
> --- /dev/null
> +++ b/drivers/mmc/host/cavium-pci-thunderx.c
> @@ -0,0 +1,198 @@
> +/*
> + * Driver for MMC and SSD cards for Cavium ThunderX SOCs.
> + *
> + * This file is subject to the terms and conditions of the GNU General Public
> + * License. See the file "COPYING" in the main directory of this archive
> + * for more details.
> + *
> + * Copyright (C) 2016 Cavium Inc.
> + */
> +#include <linux/dma-mapping.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/interrupt.h>
> +#include <linux/mmc/mmc.h>
> +#include <linux/mmc/slot-gpio.h>
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <linux/pci.h>
> +#include "cavium-mmc.h"
> +
> +struct platform_device *slot_pdev[2];

Let's not be lazy. We don't want global arrays of platform devices,
whatever the reason.

> +
> +static void thunder_mmc_acquire_bus(struct cvm_mmc_host *host)
> +{
> + down(&host->mmc_serializer);
> +}
> +
> +static void thunder_mmc_release_bus(struct cvm_mmc_host *host)
> +{
> + up(&host->mmc_serializer);
> +}
> +
> +static void thunder_mmc_int_enable(struct cvm_mmc_host *host, u64 val)
> +{
> + writeq(val, host->base + MIO_EMM_INT(host));
> + writeq(val, host->base + MIO_EMM_INT_EN_SET(host));
> +}
> +
> +static int thunder_mmc_register_interrupts(struct cvm_mmc_host *host,
> + struct pci_dev *pdev)
> +{
> + int nvec, ret, i;
> +
> + nvec = pci_alloc_irq_vectors(pdev, 1, 9, PCI_IRQ_MSIX);
> + if (nvec < 0)
> + return nvec;
> +
> + /* register interrupts */
> + for (i = 0; i < nvec; i++) {
> + ret = devm_request_irq(&pdev->dev, pci_irq_vector(pdev, i),
> + cvm_mmc_interrupt,
> + 0, cvm_mmc_irq_names[i], host);
> + if (ret)
> + return ret;
> + }
> + return 0;
> +}
> +
> +static int thunder_mmc_probe(struct pci_dev *pdev,
> + const struct pci_device_id *id)
> +{
> + struct device_node *node = pdev->dev.of_node;
> + struct device *dev = &pdev->dev;
> + struct device_node *child_node;
> + struct cvm_mmc_host *host;
> + int ret, i = 0;
> +
> + host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
> + if (!host)
> + return -ENOMEM;
> +
> + pci_set_drvdata(pdev, host);
> + ret = pcim_enable_device(pdev);
> + if (ret)
> + return ret;
> +
> + ret = pci_request_regions(pdev, KBUILD_MODNAME);
> + if (ret)
> + return ret;
> +
> + host->base = pcim_iomap(pdev, 0, pci_resource_len(pdev, 0));
> + if (!host->base)
> + return -EINVAL;
> +
> + /* On ThunderX these are identical */
> + host->dma_base = host->base;
> +
> + host->reg_off = 0x2000;
> + host->reg_off_dma = 0x160;
> +
> + host->clk = devm_clk_get(dev, NULL);
> + if (IS_ERR(host->clk))
> + return PTR_ERR(host->clk);
> +
> + ret = clk_prepare_enable(host->clk);
> + if (ret)
> + return ret;
> + host->sys_freq = clk_get_rate(host->clk);
> +
> + spin_lock_init(&host->irq_handler_lock);
> + sema_init(&host->mmc_serializer, 1);
> +
> + host->dev = dev;
> + host->acquire_bus = thunder_mmc_acquire_bus;
> + host->release_bus = thunder_mmc_release_bus;
> + host->int_enable = thunder_mmc_int_enable;
> +
> + host->big_dma_addr = true;
> + host->need_irq_handler_lock = true;
> + host->last_slot = -1;
> +
> + ret = dma_set_mask(dev, DMA_BIT_MASK(48));
> + if (ret)
> + goto error;
> +
> + /*
> + * Clear out any pending interrupts that may be left over from
> + * bootloader. Writing 1 to the bits clears them.
> + */
> + writeq(127, host->base + MIO_EMM_INT_EN(host));
> + writeq(3, host->base + MIO_EMM_DMA_INT_ENA_W1C(host));
> +
> + ret = thunder_mmc_register_interrupts(host, pdev);
> + if (ret)
> + goto error;
> +
> + for_each_child_of_node(node, child_node) {
> + /*
> + * TODO: mmc_of_parse and devm* require one device per slot.

I guess the TODO is about fixing this behavior in the mmc core, such
we can use mmc_of_parse() in more flexible manner. You may want to
remove the "TODO", but please keep the comment.

> + * Create a dummy device per slot and set the node pointer to
> + * the slot. The easiest way to get this is using
> + * of_platform_device_create.
> + */
> + if (!slot_pdev[i])
> + slot_pdev[i] = of_platform_device_create(child_node, NULL,
> + &pdev->dev);

Seems like we should verify that this is a slot node, by checking the
compatible, before creating a platform device for it. No?

> + if (!slot_pdev[i])
> + continue;
> + ret = cvm_mmc_of_slot_probe(&slot_pdev[i]->dev, host);
> + if (ret)
> + goto error;
> + i++;
> + }
> + dev_info(dev, "probed\n");
> + return 0;
> +
> +error:
> + clk_disable_unprepare(host->clk);
> + return ret;
> +}
> +
> +static void thunder_mmc_remove(struct pci_dev *pdev)
> +{
> + struct cvm_mmc_host *host = pci_get_drvdata(pdev);
> + u64 dma_cfg;
> + int i;
> +
> + for (i = 0; i < CAVIUM_MAX_MMC; i++)
> + if (host->slot[i]) {
> + cvm_mmc_of_slot_remove(host->slot[i]);
> + platform_device_del(slot_pdev[i]);
> + }
> +
> + dma_cfg = readq(host->dma_base + MIO_EMM_DMA_CFG(host));
> + dma_cfg &= ~MIO_EMM_DMA_CFG_EN;
> + writeq(dma_cfg, host->dma_base + MIO_EMM_DMA_CFG(host));
> +
> + clk_disable_unprepare(host->clk);
> +}
> +
> +static const struct pci_device_id thunder_mmc_id_table[] = {
> + { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, 0xa010) },
> + { 0, } /* end of table */
> +};
> +
> +static struct pci_driver thunder_mmc_driver = {
> + .name = KBUILD_MODNAME,
> + .id_table = thunder_mmc_id_table,
> + .probe = thunder_mmc_probe,
> + .remove = thunder_mmc_remove,
> +};
> +
> +static int __init thunder_mmc_init_module(void)
> +{
> + return pci_register_driver(&thunder_mmc_driver);
> +}
> +
> +static void __exit thunder_mmc_exit_module(void)
> +{
> + pci_unregister_driver(&thunder_mmc_driver);
> +}
> +
> +module_init(thunder_mmc_init_module);
> +module_exit(thunder_mmc_exit_module);
> +
> +MODULE_AUTHOR("Cavium Inc.");
> +MODULE_DESCRIPTION("Cavium ThunderX eMMC Driver");
> +MODULE_LICENSE("GPL");
> +MODULE_DEVICE_TABLE(pci, thunder_mmc_id_table);
> --
> 2.9.0.rc0.21.g7777322
>

Kind regards
Uffe

Next message: Tom Lendacky: "Re: [RFC PATCH v2 08/32] x86: Use PAGE_KERNEL protection for ioremap of memory page"
Previous message: kbuild test robot: "[PATCH] fix ptr_ret.cocci warnings"
Next in thread: Jan Glauber: "Re: [PATCH v12 6/9] mmc: cavium: Add MMC PCI driver for ThunderX SOCs"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]