Re: [PATCH 3/4] media: imx-csi: add frame size/interval enumeration

[Steve Longerbeam]

On 03/19/2017 03:49 AM, Russell King wrote:
> Add frame size and frame interval enumeration to CSI.
>
> CSI can scale the image independently horizontally and vertically by a
> factor of two, which enumerates to four different frame sizes.
>
> CSI can also drop frames, resulting in frame rate reduction, so
> enumerate the resulting possible output frame rates.
>
> Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>
> ---
>   drivers/staging/media/imx/imx-media-csi.c | 51 +++++++++++++++++++++++++++++++
>   1 file changed, 51 insertions(+)
>
> diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c
> index 65346e789dd6..d19659d7ddc2 100644
> --- a/drivers/staging/media/imx/imx-media-csi.c
> +++ b/drivers/staging/media/imx/imx-media-csi.c
> @@ -1073,6 +1073,55 @@ static int csi_enum_mbus_code(struct v4l2_subdev *sd,
>   	return ret;
>   }
>   
> +static int csi_enum_frame_size(struct v4l2_subdev *sd,
> +			       struct v4l2_subdev_pad_config *cfg,
> +			       struct v4l2_subdev_frame_size_enum *fse)
> +{
> +	struct csi_priv *priv = v4l2_get_subdevdata(sd);
> +	struct v4l2_mbus_framefmt *fmt;
> +	int ret = 0;
> +
> +	if (fse->pad >= CSI_NUM_PADS ||
> +	    fse->index > (fse->pad == CSI_SINK_PAD ? 0 : 3))
> +		return -EINVAL;
> +
> +	mutex_lock(&priv->lock);
> +	fmt = __csi_get_fmt(priv, cfg, fse->pad, fse->which);
> +	fse->min_width = fse->max_width = fse->index & 1 ?
> +					    fmt->width >> 1 : fmt->width;
> +	fse->min_height = fse->max_height = fse->index & 2 ?
> +					      fmt->height >> 1 : fmt->height;
> +	mutex_unlock(&priv->lock);
> +
> +	return ret;
> +}

This will only enumerate the currently set/tried format at the sink
pad. But the sink pad supports a range of widths/heights.

I think this function should call csi_try_fmt() at the sink pad.

The other media drivers do the same, they return a supported range at
the sinks rather than only the last set/tried values.

So the sink enumeration should return a continuous range.
The source enumeration should behave the same as you have it above
however, i.e. a discrete set of 4 possibilities since the CSI is limited to
only /2 downsizing in both dimensions.

Steve

> +
> +static int csi_enum_frame_interval(struct v4l2_subdev *sd,
> +				   struct v4l2_subdev_pad_config *cfg,
> +				   struct v4l2_subdev_frame_interval_enum *fie)
> +{
> +	struct csi_priv *priv = v4l2_get_subdevdata(sd);
> +	struct v4l2_mbus_framefmt *fmt;
> +	int ret = 0;
> +
> +	if (fie->pad >= CSI_NUM_PADS ||
> +	    fie->index >= (fie->pad == CSI_SINK_PAD ? 1 : ARRAY_SIZE(csi_skip)))
> +		return -EINVAL;
> +
> +	mutex_lock(&priv->lock);
> +	fmt = __csi_get_fmt(priv, cfg, fie->pad, fie->which);
> +	if ((fie->width == fmt->width || fie->width == fmt->width / 2) &&
> +	    (fie->height == fmt->height || fie->height == fmt->height / 2)) {
> +		fie->interval = priv->frame_interval;
> +		csi_apply_skip_interval(&csi_skip[fie->index], &fie->interval);
> +	} else {
> +		ret = -EINVAL;
> +	}
> +	mutex_unlock(&priv->lock);
> +
> +	return ret;
> +}
> +
>   static int csi_get_fmt(struct v4l2_subdev *sd,
>   		       struct v4l2_subdev_pad_config *cfg,
>   		       struct v4l2_subdev_format *sdformat)
> @@ -1473,6 +1522,8 @@ static struct v4l2_subdev_video_ops csi_video_ops = {
>   
>   static struct v4l2_subdev_pad_ops csi_pad_ops = {
>   	.enum_mbus_code = csi_enum_mbus_code,
> +	.enum_frame_size = csi_enum_frame_size,
> +	.enum_frame_interval = csi_enum_frame_interval,
>   	.get_fmt = csi_get_fmt,
>   	.set_fmt = csi_set_fmt,
>   	.get_selection = csi_get_selection,