Re: [PATCH] clk: tegra: rework pll_u

[Thierry Reding]

On Tue, Mar 14, 2017 at 04:12:49PM +0200, Peter De Schrijver wrote:
> In normal operation pll_u is under hardware control and has a fixed rate of
> 480MHz. Hardware will turn on pll_u on whenever any of the XUSB
> powerdomains is on. From a software point of view we model this is if pll_u
> is always on using a fixed rate clock. However the bootloader might or
> might not have configured pll_u this way. So we will check the current
> state of pll_u at boot and reconfigure it if required.
> 
> There are 3 possiblities at kernel boot:
> 1) pll_u is under hardware control: do nothing
> 2) pll_u is under hardware control and enabled: enable hardware control
> 3) pll_u is disabled: enable pll_u and enable hardware control
> 
> In all cases we also check if UTMIPLL is under hardware control at boot
> and configure it for hardware control if that is not the case.
> The same is done during SC7 resume.
> 
> Thanks to Joseph Lo <josephl@xxxxxxxxxx> for bug fixes.
> 
> Signed-off-by: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
> ---
>  drivers/clk/tegra/clk-pll.c      | 174 -----------------------
>  drivers/clk/tegra/clk-tegra210.c | 295 ++++++++++++++++++++++++++++++++++++---
>  2 files changed, 272 insertions(+), 197 deletions(-)

Applied, thanks.

Do you think this actually fixes a bug? We've had a long standing issue
with booting Debian on a Jetson TX1 which is due to some USB related PLL
failing to lock. This sounds like it could fix that particular issue.

Thierry

Attachment: signature.asc
Description: PGP signature