[PATCH v18 3/3] usb: typec: add driver for Intel Whiskey Cove PMIC USB Type-C PHY
From: Heikki Krogerus
Date: Tue Mar 21 2017 - 07:57:12 EST
This adds driver for the USB Type-C PHY on Intel WhiskeyCove
PMIC which is available on some of the Intel Broxton SoC
based platforms.
Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Reviewed-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
Reviewed-and-Tested-by: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
Tested-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
drivers/usb/typec/Kconfig | 15 ++
drivers/usb/typec/Makefile | 1 +
drivers/usb/typec/typec_wcove.c | 377 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 393 insertions(+)
create mode 100644 drivers/usb/typec/typec_wcove.c
diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
index 17792f9114c6..dfcfe459b7cf 100644
--- a/drivers/usb/typec/Kconfig
+++ b/drivers/usb/typec/Kconfig
@@ -4,4 +4,19 @@ menu "USB Power Delivery and Type-C drivers"
config TYPEC
tristate
+config TYPEC_WCOVE
+ tristate "Intel WhiskeyCove PMIC USB Type-C PHY driver"
+ depends on ACPI
+ depends on INTEL_SOC_PMIC
+ depends on INTEL_PMC_IPC
+ depends on BXT_WC_PMIC_OPREGION
+ select TYPEC
+ help
+ This driver adds support for USB Type-C detection on Intel Broxton
+ platforms that have Intel Whiskey Cove PMIC. The driver can detect the
+ role and cable orientation.
+
+ To compile this driver as module, choose M here: the module will be
+ called typec_wcove
+
endmenu
diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile
index 1012a8bed6d5..b9cb862221af 100644
--- a/drivers/usb/typec/Makefile
+++ b/drivers/usb/typec/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_TYPEC) += typec.o
+obj-$(CONFIG_TYPEC_WCOVE) += typec_wcove.o
diff --git a/drivers/usb/typec/typec_wcove.c b/drivers/usb/typec/typec_wcove.c
new file mode 100644
index 000000000000..d5a7b21fa3f1
--- /dev/null
+++ b/drivers/usb/typec/typec_wcove.c
@@ -0,0 +1,377 @@
+/**
+ * typec_wcove.c - WhiskeyCove PMIC USB Type-C PHY driver
+ *
+ * Copyright (C) 2017 Intel Corporation
+ * Author: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/usb/typec.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/intel_soc_pmic.h>
+
+/* Register offsets */
+#define WCOVE_CHGRIRQ0 0x4e09
+#define WCOVE_PHYCTRL 0x5e07
+
+#define USBC_CONTROL1 0x7001
+#define USBC_CONTROL2 0x7002
+#define USBC_CONTROL3 0x7003
+#define USBC_CC1_CTRL 0x7004
+#define USBC_CC2_CTRL 0x7005
+#define USBC_STATUS1 0x7007
+#define USBC_STATUS2 0x7008
+#define USBC_STATUS3 0x7009
+#define USBC_IRQ1 0x7015
+#define USBC_IRQ2 0x7016
+#define USBC_IRQMASK1 0x7017
+#define USBC_IRQMASK2 0x7018
+
+/* Register bits */
+
+#define USBC_CONTROL1_MODE_DRP(r) (((r) & ~0x7) | 4)
+
+#define USBC_CONTROL2_UNATT_SNK BIT(0)
+#define USBC_CONTROL2_UNATT_SRC BIT(1)
+#define USBC_CONTROL2_DIS_ST BIT(2)
+
+#define USBC_CONTROL3_PD_DIS BIT(1)
+
+#define USBC_CC_CTRL_VCONN_EN BIT(1)
+
+#define USBC_STATUS1_DET_ONGOING BIT(6)
+#define USBC_STATUS1_RSLT(r) ((r) & 0xf)
+#define USBC_RSLT_NOTHING 0
+#define USBC_RSLT_SRC_DEFAULT 1
+#define USBC_RSLT_SRC_1_5A 2
+#define USBC_RSLT_SRC_3_0A 3
+#define USBC_RSLT_SNK 4
+#define USBC_RSLT_DEBUG_ACC 5
+#define USBC_RSLT_AUDIO_ACC 6
+#define USBC_RSLT_UNDEF 15
+#define USBC_STATUS1_ORIENT(r) (((r) >> 4) & 0x3)
+#define USBC_ORIENT_NORMAL 1
+#define USBC_ORIENT_REVERSE 2
+
+#define USBC_STATUS2_VBUS_REQ BIT(5)
+
+#define USBC_IRQ1_ADCDONE1 BIT(2)
+#define USBC_IRQ1_OVERTEMP BIT(1)
+#define USBC_IRQ1_SHORT BIT(0)
+
+#define USBC_IRQ2_CC_CHANGE BIT(7)
+#define USBC_IRQ2_RX_PD BIT(6)
+#define USBC_IRQ2_RX_HR BIT(5)
+#define USBC_IRQ2_RX_CR BIT(4)
+#define USBC_IRQ2_TX_SUCCESS BIT(3)
+#define USBC_IRQ2_TX_FAIL BIT(2)
+
+#define USBC_IRQMASK1_ALL (USBC_IRQ1_ADCDONE1 | USBC_IRQ1_OVERTEMP | \
+ USBC_IRQ1_SHORT)
+
+#define USBC_IRQMASK2_ALL (USBC_IRQ2_CC_CHANGE | USBC_IRQ2_RX_PD | \
+ USBC_IRQ2_RX_HR | USBC_IRQ2_RX_CR | \
+ USBC_IRQ2_TX_SUCCESS | USBC_IRQ2_TX_FAIL)
+
+struct wcove_typec {
+ struct mutex lock; /* device lock */
+ struct device *dev;
+ struct regmap *regmap;
+ struct typec_port *port;
+ struct typec_capability cap;
+ struct typec_partner *partner;
+};
+
+enum wcove_typec_func {
+ WCOVE_FUNC_DRIVE_VBUS = 1,
+ WCOVE_FUNC_ORIENTATION,
+ WCOVE_FUNC_ROLE,
+ WCOVE_FUNC_DRIVE_VCONN,
+};
+
+enum wcove_typec_orientation {
+ WCOVE_ORIENTATION_NORMAL,
+ WCOVE_ORIENTATION_REVERSE,
+};
+
+enum wcove_typec_role {
+ WCOVE_ROLE_HOST,
+ WCOVE_ROLE_DEVICE,
+};
+
+static uuid_le uuid = UUID_LE(0x482383f0, 0x2876, 0x4e49,
+ 0x86, 0x85, 0xdb, 0x66, 0x21, 0x1a, 0xf0, 0x37);
+
+static int wcove_typec_func(struct wcove_typec *wcove,
+ enum wcove_typec_func func, int param)
+{
+ union acpi_object *obj;
+ union acpi_object tmp;
+ union acpi_object argv4 = ACPI_INIT_DSM_ARGV4(1, &tmp);
+
+ tmp.type = ACPI_TYPE_INTEGER;
+ tmp.integer.value = param;
+
+ obj = acpi_evaluate_dsm(ACPI_HANDLE(wcove->dev), uuid.b, 1, func,
+ &argv4);
+ if (!obj) {
+ dev_err(wcove->dev, "%s: failed to evaluate _DSM\n", __func__);
+ return -EIO;
+ }
+
+ ACPI_FREE(obj);
+ return 0;
+}
+
+static irqreturn_t wcove_typec_irq(int irq, void *data)
+{
+ enum typec_role role = TYPEC_SINK;
+ struct typec_partner_desc partner;
+ struct wcove_typec *wcove = data;
+ unsigned int cc1_ctrl;
+ unsigned int cc2_ctrl;
+ unsigned int cc_irq1;
+ unsigned int cc_irq2;
+ unsigned int status1;
+ unsigned int status2;
+ int ret;
+
+ mutex_lock(&wcove->lock);
+
+ ret = regmap_read(wcove->regmap, USBC_IRQ1, &cc_irq1);
+ if (ret)
+ goto err;
+
+ ret = regmap_read(wcove->regmap, USBC_IRQ2, &cc_irq2);
+ if (ret)
+ goto err;
+
+ ret = regmap_read(wcove->regmap, USBC_STATUS1, &status1);
+ if (ret)
+ goto err;
+
+ ret = regmap_read(wcove->regmap, USBC_STATUS2, &status2);
+ if (ret)
+ goto err;
+
+ ret = regmap_read(wcove->regmap, USBC_CC1_CTRL, &cc1_ctrl);
+ if (ret)
+ goto err;
+
+ ret = regmap_read(wcove->regmap, USBC_CC2_CTRL, &cc2_ctrl);
+ if (ret)
+ goto err;
+
+ if (cc_irq1) {
+ if (cc_irq1 & USBC_IRQ1_OVERTEMP)
+ dev_err(wcove->dev, "VCONN Switch Over Temperature!\n");
+ if (cc_irq1 & USBC_IRQ1_SHORT)
+ dev_err(wcove->dev, "VCONN Switch Short Circuit!\n");
+ ret = regmap_write(wcove->regmap, USBC_IRQ1, cc_irq1);
+ if (ret)
+ goto err;
+ }
+
+ if (cc_irq2) {
+ ret = regmap_write(wcove->regmap, USBC_IRQ2, cc_irq2);
+ if (ret)
+ goto err;
+ /*
+ * Ignoring any PD communication interrupts until the PD support
+ * is available
+ */
+ if (cc_irq2 & ~USBC_IRQ2_CC_CHANGE) {
+ dev_WARN(wcove->dev, "USB PD handling missing\n");
+ goto err;
+ }
+ }
+
+ if (status1 & USBC_STATUS1_DET_ONGOING)
+ goto out;
+
+ if (USBC_STATUS1_RSLT(status1) == USBC_RSLT_NOTHING) {
+ if (wcove->partner) {
+ typec_unregister_partner(wcove->partner);
+ wcove->partner = NULL;
+ }
+
+ wcove_typec_func(wcove, WCOVE_FUNC_ORIENTATION,
+ WCOVE_ORIENTATION_NORMAL);
+
+ /* This makes sure the device controller is disconnected */
+ wcove_typec_func(wcove, WCOVE_FUNC_ROLE, WCOVE_ROLE_HOST);
+
+ /* Port to default role */
+ typec_set_data_role(wcove->port, TYPEC_DEVICE);
+ typec_set_pwr_role(wcove->port, TYPEC_SINK);
+ typec_set_pwr_opmode(wcove->port, TYPEC_PWR_MODE_USB);
+
+ goto out;
+ }
+
+ if (wcove->partner)
+ goto out;
+
+ switch (USBC_STATUS1_ORIENT(status1)) {
+ case USBC_ORIENT_NORMAL:
+ wcove_typec_func(wcove, WCOVE_FUNC_ORIENTATION,
+ WCOVE_ORIENTATION_NORMAL);
+ break;
+ case USBC_ORIENT_REVERSE:
+ wcove_typec_func(wcove, WCOVE_FUNC_ORIENTATION,
+ WCOVE_ORIENTATION_REVERSE);
+ default:
+ break;
+ }
+
+ memset(&partner, 0, sizeof(partner));
+
+ switch (USBC_STATUS1_RSLT(status1)) {
+ case USBC_RSLT_SRC_DEFAULT:
+ typec_set_pwr_opmode(wcove->port, TYPEC_PWR_MODE_USB);
+ break;
+ case USBC_RSLT_SRC_1_5A:
+ typec_set_pwr_opmode(wcove->port, TYPEC_PWR_MODE_1_5A);
+ break;
+ case USBC_RSLT_SRC_3_0A:
+ typec_set_pwr_opmode(wcove->port, TYPEC_PWR_MODE_3_0A);
+ break;
+ case USBC_RSLT_SNK:
+ role = TYPEC_SOURCE;
+ break;
+ case USBC_RSLT_DEBUG_ACC:
+ partner.accessory = TYPEC_ACCESSORY_DEBUG;
+ break;
+ case USBC_RSLT_AUDIO_ACC:
+ partner.accessory = TYPEC_ACCESSORY_AUDIO;
+ break;
+ default:
+ dev_WARN(wcove->dev, "%s Undefined result\n", __func__);
+ goto err;
+ }
+
+ if (role == TYPEC_SINK) {
+ wcove_typec_func(wcove, WCOVE_FUNC_ROLE, WCOVE_ROLE_DEVICE);
+ typec_set_data_role(wcove->port, TYPEC_DEVICE);
+ typec_set_pwr_role(wcove->port, TYPEC_SINK);
+ } else {
+ wcove_typec_func(wcove, WCOVE_FUNC_ROLE, WCOVE_ROLE_HOST);
+ typec_set_pwr_role(wcove->port, TYPEC_SOURCE);
+ typec_set_data_role(wcove->port, TYPEC_HOST);
+ }
+
+ wcove->partner = typec_register_partner(wcove->port, &partner);
+ if (!wcove->partner)
+ dev_err(wcove->dev, "failed register partner\n");
+out:
+ /* If either CC pins is requesting VCONN, we turn it on */
+ if ((cc1_ctrl & USBC_CC_CTRL_VCONN_EN) ||
+ (cc2_ctrl & USBC_CC_CTRL_VCONN_EN))
+ wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VCONN, true);
+ else
+ wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VCONN, false);
+
+ /* Relying on the FSM to know when we need to drive VBUS. */
+ wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VBUS,
+ !!(status2 & USBC_STATUS2_VBUS_REQ));
+err:
+ /* REVISIT: Clear WhiskeyCove CHGR Type-C interrupt */
+ regmap_write(wcove->regmap, WCOVE_CHGRIRQ0, BIT(5));
+
+ mutex_unlock(&wcove->lock);
+ return IRQ_HANDLED;
+}
+
+static int wcove_typec_probe(struct platform_device *pdev)
+{
+ struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
+ struct wcove_typec *wcove;
+ unsigned int val;
+ int ret;
+
+ wcove = devm_kzalloc(&pdev->dev, sizeof(*wcove), GFP_KERNEL);
+ if (!wcove)
+ return -ENOMEM;
+
+ mutex_init(&wcove->lock);
+ wcove->dev = &pdev->dev;
+ wcove->regmap = pmic->regmap;
+
+ ret = regmap_irq_get_virq(pmic->irq_chip_data_level2,
+ platform_get_irq(pdev, 0));
+ if (ret < 0)
+ return ret;
+
+ ret = devm_request_threaded_irq(&pdev->dev, ret, NULL,
+ wcove_typec_irq, IRQF_ONESHOT,
+ "wcove_typec", wcove);
+ if (ret)
+ return ret;
+
+ if (!acpi_check_dsm(ACPI_HANDLE(&pdev->dev), uuid.b, 0, 0x1f)) {
+ dev_err(&pdev->dev, "Missing _DSM functions\n");
+ return -ENODEV;
+ }
+
+ wcove->cap.type = TYPEC_PORT_DRP;
+ wcove->cap.revision = USB_TYPEC_REV_1_1;
+ wcove->cap.prefer_role = TYPEC_NO_PREFERRED_ROLE;
+
+ /* Make sure the PD PHY is disabled until USB PD is available */
+ regmap_read(wcove->regmap, USBC_CONTROL3, &val);
+ regmap_write(wcove->regmap, USBC_CONTROL3, val | USBC_CONTROL3_PD_DIS);
+
+ /* DRP mode without accessory support */
+ regmap_read(wcove->regmap, USBC_CONTROL1, &val);
+ regmap_write(wcove->regmap, USBC_CONTROL1, USBC_CONTROL1_MODE_DRP(val));
+
+ wcove->port = typec_register_port(&pdev->dev, &wcove->cap);
+ if (!wcove->port)
+ return -ENODEV;
+
+ /* Unmask everything */
+ regmap_read(wcove->regmap, USBC_IRQMASK1, &val);
+ regmap_write(wcove->regmap, USBC_IRQMASK1, val & ~USBC_IRQMASK1_ALL);
+ regmap_read(wcove->regmap, USBC_IRQMASK2, &val);
+ regmap_write(wcove->regmap, USBC_IRQMASK2, val & ~USBC_IRQMASK2_ALL);
+
+ platform_set_drvdata(pdev, wcove);
+ return 0;
+}
+
+static int wcove_typec_remove(struct platform_device *pdev)
+{
+ struct wcove_typec *wcove = platform_get_drvdata(pdev);
+ unsigned int val;
+
+ /* Mask everything */
+ regmap_read(wcove->regmap, USBC_IRQMASK1, &val);
+ regmap_write(wcove->regmap, USBC_IRQMASK1, val | USBC_IRQMASK1_ALL);
+ regmap_read(wcove->regmap, USBC_IRQMASK2, &val);
+ regmap_write(wcove->regmap, USBC_IRQMASK2, val | USBC_IRQMASK2_ALL);
+
+ typec_unregister_partner(wcove->partner);
+ typec_unregister_port(wcove->port);
+ return 0;
+}
+
+static struct platform_driver wcove_typec_driver = {
+ .driver = {
+ .name = "bxt_wcove_usbc",
+ },
+ .probe = wcove_typec_probe,
+ .remove = wcove_typec_remove,
+};
+
+module_platform_driver(wcove_typec_driver);
+
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("WhiskeyCove PMIC USB Type-C PHY driver");
+MODULE_ALIAS("platform:bxt_wcove_usbc");
--
2.11.0