Re: [PATCH v2 0/8] thermal: ti-soc-thermal: Migrate slope/offset data to device tree

[Keerthy]

On Thursday 09 March 2017 01:35 PM, Keerthy wrote:
> Currently the slope and offset values for calculating the
> hot spot temperature of a particular thermal zone is part
> of driver data. Pass them here instead and obtain the values
> while of node parsing.
> 
> Tested for the slope and constant values on DRA7-EVM, OMAP3-BEAGLE. 

Hi Eduardo,

If the series looks okay could you please pull this?

Regards,
Keerthy

> 
> Changes in v2:
> 
>   * Added OMAP3 changes along with DRA7/OMAP4/OMAP5.
> 
> Keerthy (8):
>   arm: dts: omap3: Add cpu_thermal zone
>   ARM: DRA7: Thermal: Add slope and offset values
>   ARM: OMAP5: Thermal: Add slope and offset values
>   ARM: OMAP443x: Thermal: Add slope and offset values
>   ARM: OMAP4460: Thermal: Add slope and offset values
>   thermal: ti-soc-thermal: Fetch slope and offset from DT
>   thermal: ti-soc-thermal: Remove redundant constants
>   thermal: ti-soc-thermal: Remove redundant code
> 
>  arch/arm/boot/dts/dra7.dtsi                        |  17 +++
>  arch/arm/boot/dts/omap3-cpu-thermal.dtsi           |  20 +++
>  arch/arm/boot/dts/omap34xx.dtsi                    |   8 +-
>  arch/arm/boot/dts/omap36xx.dtsi                    |   8 +-
>  arch/arm/boot/dts/omap443x.dtsi                    |   4 +
>  arch/arm/boot/dts/omap4460.dtsi                    |   4 +
>  arch/arm/boot/dts/omap5.dtsi                       |   9 ++
>  .../thermal/ti-soc-thermal/dra752-thermal-data.c   |  10 --
>  .../thermal/ti-soc-thermal/omap3-thermal-data.c    |   4 -
>  .../thermal/ti-soc-thermal/omap4-thermal-data.c    |   6 -
>  .../thermal/ti-soc-thermal/omap5-thermal-data.c    |   4 -
>  drivers/thermal/ti-soc-thermal/ti-bandgap.h        |   4 -
>  drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 158 +--------------------
>  drivers/thermal/ti-soc-thermal/ti-thermal.h        |  16 ---
>  14 files changed, 71 insertions(+), 201 deletions(-)
>  create mode 100644 arch/arm/boot/dts/omap3-cpu-thermal.dtsi
>