[PATCH] Add initial SX3000b platform related documentation to document tree

[Amit Kama IL]

Add initial SX3000b platform related documentation to document tree:
 - Vendor prefix
 - Platform binding documentation
 - Interrupt Controller Unit binding documentation.

Signed-off-by: Amit Kama <amit.kama@xxxxxxxxxxx>

diff --git a/Documentation/devicetree/bindings/interrupt-controller/satixfy-icu.txt b/Documentation/devicetree/bindings/interrupt-controller/satixfy-icu.txt
index 0000000..1893393
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/satixfy-icu.txt
@@ -0,0 +1,47 @@
+Satixfy SX3000B Interrupt Controller Unit (ICU)
+
+The ICU routes HW interrupts from the inter-module fabric to the
+processor. For the MIPS interaptive, all interrupts are then routed
+to the GIC.
+
+Required properties:
+- compatible : Should be "satixfy,icu".
+- reg - must be present and equal <0x1D4D0000 0x1C0>
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt specifier.  Should be 1 - the GIC interrupt number
+- interrupt-parent - Currently only the MIPS GIC is supported, so
+<&gic> must be specified as parent
+- interrupts : in interrupt parent form. For GIC it's
+<GIC_SHARED x IRQ_TYPE_EDGE_RISING> where x is the interrupt number
+allocated for ICU in GIC.
+
+
+
+
+
+Example:
+
+	icu: interrupt-controller@1d4d0000 {
+		compatible = "sx,icu";
+		reg = <0x1D4D0000 0x1C0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SHARED 25 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	uart0: uart@1D4D09C0 {
+		compatible = "ns16550a";
+		reg = <0x1D4D09C0 0x100>;
+
+		interrupt-parent = <&icu>;
+		interrupts = <3>;
+
+		clock-frequency = <270000000>;
+
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
diff --git a/Documentation/devicetree/bindings/mips/satixfy/sx3000b.txt b/Documentation/devicetree/bindings/mips/satixfy/sx3000b.txt
index 0000000..7cae67b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/satixfy/sx3000b.txt
@@ -0,0 +1,37 @@
+Satixfy SX3000b SoC
+=========================
+
+Required properties:
+--------------------
+ - compatible: Must include "satixfy,sx3000".
+
+CPU nodes:
+----------
+A "cpus" node is required.  Required properties:
+ - #address-cells: Must be 1.
+ - #size-cells: Must be 0.
+A CPU sub-node is also required for at least CPU 0.  Since the topology may
+be probed via CPS, it is not necessary to specify secondary CPUs.  Required
+properties:
+ - device_type: Must be "cpu".
+ - compatible: Must be "mti,interaptiv".
+ - reg: CPU number.
+ - clocks: Must include the CPU clock.  See ../../clock/clock-bindings.txt for
+   details on clock bindings.
+Example:
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "mti,interaptiv";
+			clocks	= <&ext>;
+			reg = <0>;
+		};
+	};
+
+Interrupt controllers:
+----------------------
+Two nodes are required:
+ - mips,gic - MIPS Global Interrupt Controller - see Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt
+ - satixfy,icu - SX3000b SoC Interrupt Controller Unit - see Documentation/devicetree/bindings/interrupt-controller/satixfy-icu.txt
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index ec0bfb9..76819dd
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -261,6 +261,7 @@ rockchip	Fuzhou Rockchip Electronics Co., Ltd
 samsung	Samsung Semiconductor
 samtec	Samtec/Softing company
 sandisk	Sandisk Corporation
+satixfy Satixfy Technologies Ltd
 sbs	Smart Battery System
 schindler	Schindler
 seagate	Seagate Technology PLC