Re: [PATCH v4 14/23] PCI: dwc: dra7xx: Workaround for errata id i870

[Kishon Vijay Abraham I]

On Tuesday 21 March 2017 03:18 AM, Rob Herring wrote:
> On Mon, Mar 13, 2017 at 07:52:50PM +0530, Kishon Vijay Abraham I wrote:
>> According to errata i870, access to the PCIe slave port
>> that are not 32-bit aligned will result in incorrect mapping
>> to TLP Address and Byte enable fields.
>>
>> Accessing non 32-bit aligned data causes incorrect data in the target
>> buffer if memcpy is used. Implement the workaround for this
>> errata here.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
>> ---
>>  drivers/pci/dwc/pci-dra7xx.c | 53 ++++++++++++++++++++++++++++++++++++++++++++
>>  1 file changed, 53 insertions(+)
>>
>> diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
>> index 35c18534469c..147d37a7fe58 100644
>> --- a/drivers/pci/dwc/pci-dra7xx.c
>> +++ b/drivers/pci/dwc/pci-dra7xx.c
>> @@ -26,6 +26,8 @@
>>  #include <linux/pm_runtime.h>
>>  #include <linux/resource.h>
>>  #include <linux/types.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/regmap.h>
>>  
>>  #include "pcie-designware.h"
>>  
>> @@ -528,6 +530,51 @@ static const struct of_device_id of_dra7xx_pcie_match[] = {
>>  	{},
>>  };
>>  
>> +/*
>> + * dra7xx_pcie_ep_unaligned_memaccess: workaround for AM572x/AM571x Errata i870
>> + * @dra7xx: the dra7xx device where the workaround should be applied
>> + *
>> + * Access to the PCIe slave port that are not 32-bit aligned will result
>> + * in incorrect mapping to TLP Address and Byte enable fields. Therefore,
>> + * byte and half-word accesses are not possible to byte offset 0x1, 0x2, or
>> + * 0x3.
>> + *
>> + * To avoid this issue set PCIE_SS1_AXI2OCP_LEGACY_MODE_ENABLE to 1.
>> + */
>> +static int dra7xx_pcie_ep_unaligned_memaccess(struct device *dev)
>> +{
>> +	int ret;
>> +	struct device_node *np = dev->of_node;
>> +	struct regmap *regmap;
>> +	unsigned int reg;
>> +	unsigned int field;
>> +
>> +	regmap = syscon_regmap_lookup_by_phandle(np,
>> +						 "ti,syscon-unaligned-access");
>> +	if (IS_ERR(regmap)) {
>> +		dev_dbg(dev, "can't get ti,syscon-unaligned-access\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	if (of_property_read_u32_index(np, "ti,syscon-unaligned-access", 1,
>> +				       &reg)) {
>> +		dev_err(dev, "couldn't get legacy mode register offset\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	if (of_property_read_u32_index(np, "ti,syscon-unaligned-access", 2,
>> +				       &field)) {
>> +		dev_err(dev, "can't get bit field for setting legacy mode\n");
>> +		return -EINVAL;
>> +	}
> 
> If this remains, it's screaming for a helper function. 
> of_parse_phandle_with_args already exists, but maybe a syscon specific 
> function is in order.

hmm, I guess for now I can use of_parse_phandle_with_args. The number of args
might vary for different platforms/scenarios?

Thanks
Kishon