[RESEND PATCH v2 07/53] mtd: nand: denali: consolidate INTR_STATUS__* and INTR_EN__* macros

From: Masahiro Yamada
Date: Wed Mar 22 2017 - 16:13:39 EST


The interrupts are enabled by INTR_EN register, then asserted
interrupts can be observed via INTR_STATUS register.

The bit fields are identical between INTR_EN and INTR_STATUS, so we
can merge the bit field macros. Likewise for DATA_INTR.

Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
---

Changes in v2:
- Newly added

drivers/mtd/nand/denali.c | 56 ++++++++++++++++++++-----------------------
drivers/mtd/nand/denali.h | 61 ++++++++++++++---------------------------------
2 files changed, 44 insertions(+), 73 deletions(-)

diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index c9806e6..2c59eb3 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -45,16 +45,16 @@ MODULE_PARM_DESC(onfi_timing_mode,
* We define a macro here that combines all interrupts this driver uses into
* a single constant value, for convenience.
*/
-#define DENALI_IRQ_ALL (INTR_STATUS__DMA_CMD_COMP | \
- INTR_STATUS__ECC_TRANSACTION_DONE | \
- INTR_STATUS__ECC_ERR | \
- INTR_STATUS__PROGRAM_FAIL | \
- INTR_STATUS__LOAD_COMP | \
- INTR_STATUS__PROGRAM_COMP | \
- INTR_STATUS__TIME_OUT | \
- INTR_STATUS__ERASE_FAIL | \
- INTR_STATUS__RST_COMP | \
- INTR_STATUS__ERASE_COMP)
+#define DENALI_IRQ_ALL (INTR__DMA_CMD_COMP | \
+ INTR__ECC_TRANSACTION_DONE | \
+ INTR__ECC_ERR | \
+ INTR__PROGRAM_FAIL | \
+ INTR__LOAD_COMP | \
+ INTR__PROGRAM_COMP | \
+ INTR__TIME_OUT | \
+ INTR__ERASE_FAIL | \
+ INTR__RST_COMP | \
+ INTR__ERASE_COMP)

/*
* indicates whether or not the internal value for the flash bank is
@@ -159,7 +159,7 @@ static void read_status(struct denali_nand_info *denali)
static void reset_bank(struct denali_nand_info *denali)
{
uint32_t irq_status;
- uint32_t irq_mask = INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT;
+ uint32_t irq_mask = INTR__RST_COMP | INTR__TIME_OUT;

clear_interrupts(denali);

@@ -167,7 +167,7 @@ static void reset_bank(struct denali_nand_info *denali)

irq_status = wait_for_irq(denali, irq_mask);

- if (irq_status & INTR_STATUS__TIME_OUT)
+ if (irq_status & INTR__TIME_OUT)
dev_err(denali->dev, "reset bank failed.\n");
}

@@ -177,22 +177,22 @@ static uint16_t denali_nand_reset(struct denali_nand_info *denali)
int i;

for (i = 0; i < denali->max_banks; i++)
- iowrite32(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT,
+ iowrite32(INTR__RST_COMP | INTR__TIME_OUT,
denali->flash_reg + INTR_STATUS(i));

for (i = 0; i < denali->max_banks; i++) {
iowrite32(1 << i, denali->flash_reg + DEVICE_RESET);
while (!(ioread32(denali->flash_reg + INTR_STATUS(i)) &
- (INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT)))
+ (INTR__RST_COMP | INTR__TIME_OUT)))
cpu_relax();
if (ioread32(denali->flash_reg + INTR_STATUS(i)) &
- INTR_STATUS__TIME_OUT)
+ INTR__TIME_OUT)
dev_dbg(denali->dev,
"NAND Reset operation timed out on bank %d\n", i);
}

for (i = 0; i < denali->max_banks; i++)
- iowrite32(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT,
+ iowrite32(INTR__RST_COMP | INTR__TIME_OUT,
denali->flash_reg + INTR_STATUS(i));

return PASS;
@@ -716,7 +716,7 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
uint32_t addr, cmd, irq_status, irq_mask;

if (op == DENALI_READ)
- irq_mask = INTR_STATUS__LOAD_COMP;
+ irq_mask = INTR__LOAD_COMP;
else if (op == DENALI_WRITE)
irq_mask = 0;
else
@@ -823,8 +823,7 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
uint32_t irq_status;
- uint32_t irq_mask = INTR_STATUS__PROGRAM_COMP |
- INTR_STATUS__PROGRAM_FAIL;
+ uint32_t irq_mask = INTR__PROGRAM_COMP | INTR__PROGRAM_FAIL;
int status = 0;

denali->page = page;
@@ -851,7 +850,7 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
- uint32_t irq_mask = INTR_STATUS__LOAD_COMP;
+ uint32_t irq_mask = INTR__LOAD_COMP;
uint32_t irq_status, addr, cmd;

denali->page = page;
@@ -912,7 +911,7 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
bool check_erased_page = false;
unsigned int bitflips = 0;

- if (irq_status & INTR_STATUS__ECC_ERR) {
+ if (irq_status & INTR__ECC_ERR) {
/* read the ECC errors. we'll ignore them for now */
uint32_t err_address, err_correction_info, err_byte,
err_sector, err_device, err_correction_value;
@@ -969,7 +968,7 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
* for a while for this interrupt
*/
while (!(read_interrupt_status(denali) &
- INTR_STATUS__ECC_TRANSACTION_DONE))
+ INTR__ECC_TRANSACTION_DONE))
cpu_relax();
clear_interrupts(denali);
denali_set_intr_modes(denali, true);
@@ -1020,8 +1019,7 @@ static int write_page(struct mtd_info *mtd, struct nand_chip *chip,
dma_addr_t addr = denali->buf.dma_buf;
size_t size = mtd->writesize + mtd->oobsize;
uint32_t irq_status;
- uint32_t irq_mask = INTR_STATUS__DMA_CMD_COMP |
- INTR_STATUS__PROGRAM_FAIL;
+ uint32_t irq_mask = INTR__DMA_CMD_COMP | INTR__PROGRAM_FAIL;

/*
* if it is a raw xfer, we want to disable ecc and send the spare area.
@@ -1119,8 +1117,7 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
size_t size = mtd->writesize + mtd->oobsize;

uint32_t irq_status;
- uint32_t irq_mask = INTR_STATUS__ECC_TRANSACTION_DONE |
- INTR_STATUS__ECC_ERR;
+ uint32_t irq_mask = INTR__ECC_TRANSACTION_DONE | INTR__ECC_ERR;
bool check_erased_page = false;

if (page != denali->page) {
@@ -1168,7 +1165,7 @@ static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
struct denali_nand_info *denali = mtd_to_denali(mtd);
dma_addr_t addr = denali->buf.dma_buf;
size_t size = mtd->writesize + mtd->oobsize;
- uint32_t irq_mask = INTR_STATUS__DMA_CMD_COMP;
+ uint32_t irq_mask = INTR__DMA_CMD_COMP;

if (page != denali->page) {
dev_err(denali->dev,
@@ -1241,10 +1238,9 @@ static int denali_erase(struct mtd_info *mtd, int page)
index_addr(denali, cmd, 0x1);

/* wait for erase to complete or failure to occur */
- irq_status = wait_for_irq(denali, INTR_STATUS__ERASE_COMP |
- INTR_STATUS__ERASE_FAIL);
+ irq_status = wait_for_irq(denali, INTR__ERASE_COMP | INTR__ERASE_FAIL);

- return irq_status & INTR_STATUS__ERASE_FAIL ? NAND_STATUS_FAIL : PASS;
+ return irq_status & INTR__ERASE_FAIL ? NAND_STATUS_FAIL : PASS;
}

static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h
index 403a7c8..8df2285 100644
--- a/drivers/mtd/nand/denali.h
+++ b/drivers/mtd/nand/denali.h
@@ -218,40 +218,22 @@

#define INTR_STATUS(__bank) (0x410 + ((__bank) * 0x50))
#define INTR_EN(__bank) (0x420 + ((__bank) * 0x50))
-
-#define INTR_STATUS__ECC_TRANSACTION_DONE 0x0001
-#define INTR_STATUS__ECC_ERR 0x0002
-#define INTR_STATUS__DMA_CMD_COMP 0x0004
-#define INTR_STATUS__TIME_OUT 0x0008
-#define INTR_STATUS__PROGRAM_FAIL 0x0010
-#define INTR_STATUS__ERASE_FAIL 0x0020
-#define INTR_STATUS__LOAD_COMP 0x0040
-#define INTR_STATUS__PROGRAM_COMP 0x0080
-#define INTR_STATUS__ERASE_COMP 0x0100
-#define INTR_STATUS__PIPE_CPYBCK_CMD_COMP 0x0200
-#define INTR_STATUS__LOCKED_BLK 0x0400
-#define INTR_STATUS__UNSUP_CMD 0x0800
-#define INTR_STATUS__INT_ACT 0x1000
-#define INTR_STATUS__RST_COMP 0x2000
-#define INTR_STATUS__PIPE_CMD_ERR 0x4000
-#define INTR_STATUS__PAGE_XFER_INC 0x8000
-
-#define INTR_EN__ECC_TRANSACTION_DONE 0x0001
-#define INTR_EN__ECC_ERR 0x0002
-#define INTR_EN__DMA_CMD_COMP 0x0004
-#define INTR_EN__TIME_OUT 0x0008
-#define INTR_EN__PROGRAM_FAIL 0x0010
-#define INTR_EN__ERASE_FAIL 0x0020
-#define INTR_EN__LOAD_COMP 0x0040
-#define INTR_EN__PROGRAM_COMP 0x0080
-#define INTR_EN__ERASE_COMP 0x0100
-#define INTR_EN__PIPE_CPYBCK_CMD_COMP 0x0200
-#define INTR_EN__LOCKED_BLK 0x0400
-#define INTR_EN__UNSUP_CMD 0x0800
-#define INTR_EN__INT_ACT 0x1000
-#define INTR_EN__RST_COMP 0x2000
-#define INTR_EN__PIPE_CMD_ERR 0x4000
-#define INTR_EN__PAGE_XFER_INC 0x8000
+#define INTR__ECC_TRANSACTION_DONE 0x0001
+#define INTR__ECC_ERR 0x0002
+#define INTR__DMA_CMD_COMP 0x0004
+#define INTR__TIME_OUT 0x0008
+#define INTR__PROGRAM_FAIL 0x0010
+#define INTR__ERASE_FAIL 0x0020
+#define INTR__LOAD_COMP 0x0040
+#define INTR__PROGRAM_COMP 0x0080
+#define INTR__ERASE_COMP 0x0100
+#define INTR__PIPE_CPYBCK_CMD_COMP 0x0200
+#define INTR__LOCKED_BLK 0x0400
+#define INTR__UNSUP_CMD 0x0800
+#define INTR__INT_ACT 0x1000
+#define INTR__RST_COMP 0x2000
+#define INTR__PIPE_CMD_ERR 0x4000
+#define INTR__PAGE_XFER_INC 0x8000

#define PAGE_CNT(__bank) (0x430 + ((__bank) * 0x50))
#define ERR_PAGE_ADDR(__bank) (0x440 + ((__bank) * 0x50))
@@ -284,20 +266,13 @@
#define IGNORE_ECC_DONE__FLAG 0x0001

#define DMA_INTR 0x720
+#define DMA_INTR_EN 0x730
#define DMA_INTR__TARGET_ERROR 0x0001
#define DMA_INTR__DESC_COMP_CHANNEL0 0x0002
#define DMA_INTR__DESC_COMP_CHANNEL1 0x0004
#define DMA_INTR__DESC_COMP_CHANNEL2 0x0008
#define DMA_INTR__DESC_COMP_CHANNEL3 0x0010
-#define DMA_INTR__MEMCOPY_DESC_COMP 0x0020
-
-#define DMA_INTR_EN 0x730
-#define DMA_INTR_EN__TARGET_ERROR 0x0001
-#define DMA_INTR_EN__DESC_COMP_CHANNEL0 0x0002
-#define DMA_INTR_EN__DESC_COMP_CHANNEL1 0x0004
-#define DMA_INTR_EN__DESC_COMP_CHANNEL2 0x0008
-#define DMA_INTR_EN__DESC_COMP_CHANNEL3 0x0010
-#define DMA_INTR_EN__MEMCOPY_DESC_COMP 0x0020
+#define DMA_INTR__MEMCOPY_DESC_COMP 0x0020

#define TARGET_ERR_ADDR_LO 0x740
#define TARGET_ERR_ADDR_LO__VALUE 0xffff
--
2.7.4