Re: [PATCH] phy: cpcap-usb: Add CPCAP PMIC USB support

[Tony Lindgren]

* Sebastian Reichel <sre@xxxxxxxxxx> [170321 19:20]:
> Hi,
> 
> On Thu, Mar 16, 2017 at 08:51:52PM -0700, Tony Lindgren wrote:
> > Some Motorola phones like droid 4 use a custom CPCAP PMIC that has a
> > multiplexing USB PHY.
> > 
> > This USB PHY can operate at least in four modes using pin multiplexing
> > and two control GPIOS:
> > 
> > - Pass through companion PHY for the SoC USB PHY
> > - ULPI PHY for the SoC
> > - Pass through USB for the modem
> > - UART debug console for the SoC
> > 
> > This patch adds support for droid 4 USB PHY and debug UART modes,
> > support for other modes can be added later on as needed.
> > 
> > Both peripheral and host mode are working for the USB. The
> > host mode depends on the cpcap-charger driver for VBUS.
> > 
> > VBUS and ID pin detection are done using cpcap-adc IIO ADC
> > driver.
> 
> I tested UART, USB slave (cdc-ether) & USB host (keyboard & touchpad
> from Atrix lapdock) mode with Droid 4:
> 
> Tested-by: Sebastian Reichel <sre@xxxxxxxxxx>

Thanks for testing. I'll repost v2 shortly with a minor change to
use iio_read_channel_processed() instead of iio_read_channel_scale()
as the ADC values are processed in the driver and not scaled by
the IIO framework.

Regards,

Tony