Re: [PATCH 1/2] extcon: usb-gpio: Add level trigger support

[Rob Herring]

On Fri, Mar 24, 2017 at 6:56 AM, Baolin Wang <baolin.wang@xxxxxxxxxx> wrote:
> Hi,
>
> On 24 March 2017 at 19:08, Chanwoo Choi <cw00.choi@xxxxxxxxxxx> wrote:
>> Hi,
>>
>> On 2017ë 03ì 20ì 16:59, Baolin Wang wrote:
>>> Now extcon-usb-gpio only supports for GPIO egdge trigger, but VBUS/ID
>>> gpios' detection can be triggered by the level trigger on some platforms.
>>> Thus intoduce one property 'extcon-gpio,level-trigger' to identify this
>>> situation.
>>>
>>> Signed-off-by: Baolin Wang <baolin.wang@xxxxxxxxxx>
>>> ---
>>>  .../devicetree/bindings/extcon/extcon-usb-gpio.txt |    3 +++
>>>  1 file changed, 3 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
>>> index dfc14f7..191504b 100644
>>> --- a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
>>> +++ b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
>>> @@ -9,6 +9,9 @@ Required properties:
>>>  Either one of id-gpio or vbus-gpio must be present. Both can be present as well.
>>>  - id-gpio: gpio for USB ID pin. See gpio binding.
>>>  - vbus-gpio: gpio for USB VBUS pin.
>>> +- extcon-gpio,level-trigger: Boolean, set this gpio's interrupt flag to
>>
>> It is 'extcon-usb-gpio' instead of 'extcon-gpio'.
>
> Sure.

"extcon-gpio" is not a vendor, so don't make it a vendor prefix.

>>> +level trigger. If not specified defaults to false, gpio's interrupt flag
>>> +defaults to edge trigger.
>>
>> I understand why you need the new flag.
>> But, I'm not sure it is right way to add the new flag for interrupt flag.
>>
>> IMHO, I think that we need to find the more proper way to get the interrupt flag
>> or maybe, we may need to implement the new helper api to get the interrupt
>> flag for gpio pin when we use the gpio as the interrupt source,
>
> Yes, I agree with you. We already have helper functions to get
> interrupt flag from device tree, but we can not get the irq number of
> GPIO to configure in device tree, then I introduce one new flag to
> indicate the trigger type. But I like to change the patch if there are
> any good suggestion. Thanks.

The extcon binding needs an overhaul in general. I'm not going to take
extensions to a broken binding. What's needed is a USB connector
binding like we have for HDMI and other video connectors. And for
USB-C, those need to be combined.

Rob