Re: [PATCH 3/3] ARM: dts: sun8i: add device tree for Lichee Pi Zero with Dock
From: Maxime Ripard
Date: Fri Mar 24 2017 - 11:58:59 EST
On Thu, Mar 23, 2017 at 03:34:18AM +0800, Icenowy Zheng wrote:
>
> 2017å3æ23æ 03:24ä Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>åéï
> >
> > On Fri, Mar 17, 2017 at 11:43:43PM +0800, Icenowy Zheng wrote:
> > > Lichee Pi Zero features a dock, which adds some functions, and should be
> > > soldered with the core board of Lichee Pi Zero.
> > >
> > > Add support for the dock as a new dts, as soldering is needed to make
> > > the dock usable and there's functions enabled on the dock that is
> > > unavailable at the 2.54mm pins of the core board.
> > >
> > > Signed-off-by: Icenowy Zheng <icenowy@xxxxxxxx>
> > > ---
> > >Â arch/arm/boot/dts/MakefileÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |Â 3 +-
> > >Â arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts | 98 ++++++++++++++++++++++
> > >Â 2 files changed, 100 insertions(+), 1 deletion(-)
> > >Â create mode 100644 arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts
> > >
> > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > > index 43c27b624f94..de52d403f818 100644
> > > --- a/arch/arm/boot/dts/Makefile
> > > +++ b/arch/arm/boot/dts/Makefile
> > > @@ -878,7 +878,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \
> > >Â sun8i-h3-orangepi-plus.dtb \
> > >Â sun8i-h3-orangepi-plus2e.dtb \
> > >Â sun8i-r16-parrot.dtb \
> > > - sun8i-v3s-licheepi-zero.dtb
> > > + sun8i-v3s-licheepi-zero.dtb \
> > > + sun8i-v3s-licheepi-zero-dock.dtb
> > >Â dtb-$(CONFIG_MACH_SUN9I) += \
> > >Â sun9i-a80-optimus.dtb \
> > >Â sun9i-a80-cubieboard4.dtb
> > > diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts
> > > new file mode 100644
> > > index 000000000000..956fa47fde53
> > > --- /dev/null
> > > +++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts
> > > @@ -0,0 +1,98 @@
> > > +/*
> > > + * Copyright (C) 2016 Icenowy Zheng <icenowy@xxxxxxxx>
> > > + *
> > > + * This file is dual-licensed: you can use it either under the terms
> > > + * of the GPL or the X11 license, at your option. Note that this dual
> > > + * licensing only applies to this file, and not this project as a
> > > + * whole.
> > > + *
> > > + *Â a) This file is free software; you can redistribute it and/or
> > > + *ÂÂÂÂ modify it under the terms of the GNU General Public License as
> > > + *ÂÂÂÂ published by the Free Software Foundation; either version 2 of the
> > > + *ÂÂÂÂ License, or (at your option) any later version.
> > > + *
> > > + *ÂÂÂÂ This file is distributed in the hope that it will be useful,
> > > + *ÂÂÂÂ but WITHOUT ANY WARRANTY; without even the implied warranty of
> > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > > + *ÂÂÂÂ GNU General Public License for more details.
> > > + *
> > > + * Or, alternatively,
> > > + *
> > > + *Â b) Permission is hereby granted, free of charge, to any person
> > > + *ÂÂÂÂ obtaining a copy of this software and associated documentation
> > > + *ÂÂÂÂ files (the "Software"), to deal in the Software without
> > > + *ÂÂÂÂ restriction, including without limitation the rights to use,
> > > + *ÂÂÂÂ copy, modify, merge, publish, distribute, sublicense, and/or
> > > + *ÂÂÂÂ sell copies of the Software, and to permit persons to whom the
> > > + *ÂÂÂÂ Software is furnished to do so, subject to the following
> > > + *ÂÂÂÂ conditions:
> > > + *
> > > + *ÂÂÂÂ The above copyright notice and this permission notice shall be
> > > + *ÂÂÂÂ included in all copies or substantial portions of the Software.
> > > + *
> > > + *ÂÂÂÂ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> > > + *ÂÂÂÂ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> > > + *ÂÂÂÂ OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> > > + *ÂÂÂÂ NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> > > + *ÂÂÂÂ HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> > > + *ÂÂÂÂ WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > > + *ÂÂÂÂ FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> > > + *ÂÂÂÂ OTHER DEALINGS IN THE SOFTWARE.
> > > + */
> > > +
> > > +#include "sun8i-v3s-licheepi-zero.dts"
> > > +
> > > +#include <dt-bindings/input/input.h>
> > > +
> > > +/ {
> > > + model = "Lichee Pi Zero with Dock";
> > > + compatible = "licheepi,licheepi-zero-dock", "licheepi,licheepi-zero",
> > > + ÂÂÂÂ "allwinner,sun8i-v3s";
> > > +};
> > > +
> > > +&leds {
> > > + /* The LEDs conflict with MMC1 slot */
> >
> > How does it conflicts?
>
> They both use PGx.
So they use the same bank? How is that a conflict?
> > > +&mmc1 {
> > > + pinctrl-0 = <&mmc1_pins>;
> > > + pinctrl-names = "default";
> > > + broken-cd;
> >
> > There's no card-detect on a GPIO?
>
> Yes.
>
> All SD slots on Lichee Pi series have no card-detect.
Weird... Ok.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
Attachment:
signature.asc
Description: PGP signature