Re: [PATCH 4.4 00/30] 4.4.57-stable review

[Alexandre Belloni]

On 25/03/2017 at 12:27:05 +0100, Alexandre Belloni wrote:
> On 24/03/2017 at 21:15:28 -0700, Guenter Roeck wrote:
> > On 03/24/2017 05:10 PM, Kevin Hilman wrote:
> > > + at91 maintainers
> > > 
> 
> + Richard, Ludovic
> 
> > > kernelci.org bot <bot@xxxxxxxxxxxx> writes:
> > > 
> > > > stable-rc boot: 496 boots: 1 failed, 492 passed with 2 offline, 1 conflict (v4.4.56-31-gbcd1e808ead3)
> > > > 
> > > > Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/kernel/v4.4.56-31-gbcd1e808ead3/
> > > > Full Build Summary: https://kernelci.org/build/stable-rc/kernel/v4.4.56-31-gbcd1e808ead3/
> > > > 
> > > > Tree: stable-rc
> > > > Branch: local/linux-4.4.y
> > > > Git Describe: v4.4.56-31-gbcd1e808ead3
> > > > Git Commit: bcd1e808ead359a9af8476025d8b8a5349796dcd
> > > > Git URL: http://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> > > > Tested: 97 unique boards, 23 SoC families, 31 builds out of 202
> > > > 
> > > > Boot Regressions Detected:
> > > > 
> > > > arm:
> > > > 
> > > >     multi_v7_defconfig+CONFIG_LKDTM=y:
> > > >         at91-sama5d2_xplained:
> > > >             lab-free-electrons: new failure (last pass: v4.4.51-27-g2ffd736763bc)
> > > 
> > > This one is definitely a new regression.  Hopefully the AT91 maintainers
> > > (now Cc'd) can have a closer look.
> > > 
> > 
> > 6b1d7b6f54c7 would be a candidate for a culprit.
> > 
> 
> Possibly and it may exercise a part of the logic that is not quite
> robust in atmel_set_ops(). Basically, atmel_rx_from_pdc() must not be
> chosen on sama5d2 (it has no PDC).
> 

I confirm the issue, commit 6b1d7b6f54c7 enables dma but
uart1 node doesn't have a "dmas" property so the driver thinks it has to
use PDC which is not correct. I'll try backporting
b1708b72a0959a032cd2eebb77fa9086ea3e0c84 which seems the proper way
forward.

> For reference, bootlog here:
> https://storage.kernelci.org/stable-rc/v4.4.56-31-gbcd1e808ead3/arm-multi_v7_defconfig+CONFIG_LKDTM=y/lab-free-electrons/boot-at91-sama5d2_xplained.html
> 
> > > > Conflicting Boot Failure Detected: (These likely are not failures as other labs are reporting PASS. Needs review.)
> > > > 
> > > > arm:
> > > > 
> > > >     multi_v7_defconfig+CONFIG_PROVE_LOCKING=y:
> > > >         at91-sama5d3_xplained:
> > > >             lab-baylibre-seattle: PASS
> > > >             lab-free-electrons: FAIL
> > > 
> > > @Alexandre: Because it's passing in my lab and failing in yours, I'm
> > > guessing this is still the UART overflow issue we've discussed before?
> > > 
> > > What's strange is that this defconfig in your lab seems to only be
> > > booting for stable/linux-4.4.y[1] but not mailine or newer stable trees,
> > > so I couldn't check if the problem still exists in mainline.
> > > 
> 
> It definitively exists but it is not solvable quickly. Either we run
> without DMA and we'll see the issue because CONFIG_PROVE_LOCKING makes
> the interrupt handling to slow and characters are dropped. Or, we add
> DMA and then CONFIG_PROVE_LOCKING will find a deadlock (that's a real
> deadlock, not a false positive) and the platform will not boot.
> 
> This only affects sama5d3 because it is the only SoC using the hdma
> controller with the uart IP. Earlier SoCs have a PDC and later SoCs are
> using the xdma controller.
> 
> This happens because atc_chain_complete() keeps the lock before calling
> the callback.  And atmel_complete_tx_dma() will call dmaengine function
> that will try to acquire the lock. No issue using the xdmac because
> there is no lock.
> 
> -- 
> Alexandre Belloni, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com

-- 
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com