Re: [PATCH v2 2/2] ARM: dts: sun7i: Add CAN node and can0_pins_a pinctrl settings

[Maxime Ripard]

Hi Patrick,

On Fri, Mar 24, 2017 at 10:52:19PM +0100, Patrick Menschel wrote:
> The A20 SoC has an on-board CAN controller. This patch adds the device node
> and the corresponding pinctrl settings for pins PH20 and PH21.
> 
> The CAN controller is inherited from the A10 SoC and uses the same driver.
> 
> This patch is adapted from the description in
> Documentation/devicetree/bindings/net/can/sun4i_can.txt
> 
> Signed-off-by: Patrick Menschel <menschel.p@xxxxxxxxx>
> ---
>  arch/arm/boot/dts/sun7i-a20.dtsi | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
> index 2db97fc..25af586 100644
> --- a/arch/arm/boot/dts/sun7i-a20.dtsi
> +++ b/arch/arm/boot/dts/sun7i-a20.dtsi
> @@ -1096,6 +1096,11 @@
>  			#interrupt-cells = <3>;
>  			#gpio-cells = <3>;
>  
> +			can0_pins_a: can0@0 {
> +				pins = "PH20","PH21";
> +				function = "can";
> +			};
> +
>  			clk_out_a_pins_a: clk_out_a@0 {
>  				pins = "PI12";
>  				function = "clk_out_a";
> @@ -1582,6 +1587,14 @@
>  			#size-cells = <0>;
>  		};
>  
> +		can0: can@01c2bc00 {
> +			compatible = "allwinner,sun4i-a10-can";

Sorry for not spotting this earlier, but this would need an A20
compatible too, to deal with the case where it turns out not to be
compatible.

you can do something like this:
compatible = "allwinner,sun7i-a20-can", "allwinner,sun4i-a10-can";

Ideally the pinctrl groups addition should be split out in a separate
patch too.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Attachment: signature.asc
Description: PGP signature